Skip to main content
New
Added the ability to specify your own parameter as the room area source (the "Room area source" setting on the "Apartment areas" tab)
Fix
Fixed an error due to which joints with a bend into the overlying slab were not created if the slab carried a room floor modelled as a separate floor
New
Added export, import and duplication of configurations
New
The plugin window has been made non-modal (it does not block the Revit window)
New
Added the ability to clear the parameter value only in the selected schedule rows
New
When working in views, the "Nested families only" option has been added
New
When working in a view, the "Along route" element selection option has been added, which allows numbering pipe, duct, cable tray or conduit elements along the route from the selected element to its end, with a choice of path if there are branches
New
Added the ability to number with a composite number by mask (for example, 1.1.1 with a limit for each part of the number) when writing the number into a text parameter in a view and in a schedule
New
Added the ability to number by groups formed by the schedule's sorting/grouping settings when working in a schedule
New
Added additional sorting of elements by several parameters when working in a schedule, which allows setting sorting levels beyond those available in the schedule settings
New
When working in a view, the "Spline processing" setting has been added for selection by curve intersection, allowing the intersection to be searched with the spline, with the polyline through its control points, or with both
New
Added the ability to number into "Type Name" and "Family Name" by renaming the element's type or family when working in a view and in a schedule
New
Added the "Continue numbering" button next to the "Initial value" field, which inserts the next value after the last numbering performed in the same mode (in a view or in a schedule)
Improved
Added an explanation in place of the grouping-by-parameter settings in schedules without the "Itemize every instance" option
Improved
The "Number only selected rows" option is no longer hidden but becomes unavailable, and a tooltip with the conditions of its availability has been added next to it
Fix
Fixed an error due to which digits selected in the "Initial value" field could not be replaced with letters and vice versa
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
New
Fixed an error due to which the window with the plugin results could end up behind the Revit window
Improved
Redesigned the theme selection dialog in the settings window
Improved
Added the ability to change the upper level of rooms
Fix
Fixed the vertical shift of rooms when trying to change their base level, which cannot be edited in Revit
Fix
Fixed the "Sequence contains no elements" error that occurred when reinforcing some slabs with bevelled ends if the additional rebar step was moved to the middle of the slab
Fix
Fixed a Revit crash after export if the document print setup is incompatible with the default printer
Fix
Fixed some interface errors
Fix
Fixed some interface errors
New
Added support for nanoCAD from Nanosoft regional divisions
New
Added support for nanoCAD from Nanosoft regional divisions
New
Added a notification about the discontinuation of the plugin support
New
Added copying of assemblies
New
Added copying of sheets
New
Added the ability to choose the coordinate system for copying model elements
Fix
Fixed an error in copying filters
Fix
Fixed an error in copying color schemes
Fix
Fixed an error when activating an unsaved document
Fix
Fixed an error where, after selecting sheets that are not grouped in the Project Browser, the "Export" button remained inactive and the selected sheets were not exported
Fix
Fixed an error where the order of folders and sheets in the tree did not match the Project Browser
Fix
Fixed an error where, in the extended numbering, the selected numeric parameter (Integer or Number) for recording the number of sheets in a group was not saved and after the plugin was opened the first text parameter of the sheet was selected instead
Fix
Fixed an error where, after the group numbering settings were enabled, the splitter between the sheet list and the settings panel stopped working
Fix
Fixed an error where the order of folders and sheets in the tree did not match the Project Browser
New
Added the "[No parameter]" value, which allows selecting the elements of a category that do not have the specified parameter
New
A setting has been added to the SolidTouch strategy that takes into account only the contact with the largest area out of several contacts
New
The palette now lets you choose where to run the processing: in the current view, in the document, in the selected views or on the elements selected in the model before the run
New
Added the ability to interrupt the run
Fix
Fixed an error where, in the SolidTouch strategy, the face distance tolerance was not taken into account for every relative position of the elements
Improved
Added a ModPlus loading log with the execution time of each stage
Improved
Added a ModPlus loading log with the execution time of each stage
Improved
Added a ModPlus loading log with the execution time of each stage
Improved
Added a ModPlus loading log with the execution time of each stage
New
Added a button next to the "Not added to the menu" label in the "Plugins" section that allows creating a standard menu or going to the "Menu" section
New
Added the ability to duplicate parameter conditions in the element filter
New
Added the ability to specify a case-insensitive check for parameter conditions in the element filter
New
Added a search scope in linked files in the parameter value search window with the ability to select a specific link or search in all links at once
New
Added the built-in "Add shared to Assembly" command, which adds the shared nested families of the elements to the selected assemblies
Improved
Extended the built-in "Select Host" command: it now selects the elements that the selected pipe and duct insulation is applied to
Fix
Fixed an error where the built-in command for selecting element annotations did not find tags of pipe and duct insulation and lining, nor tags of stair runs, landings and supports, railing handrails and bars of area and path reinforcement
New
Added a separate line in the report of strategies with relationships for elements that matched the rule filters but remained without a relationship
Fix
Fixed an error where the license was requested when opening the palette and when its data was updated automatically
Fix
Fixed an error that occurred in some cases when checking the availability of a button on the ribbon
Fix
Fixed a typo in the side title blocks "Mp_GOST_P_21.101_F3L2" and "Mp_STB_2255_E1L2"
New
Added a choice of the baseboard placement: on the floor, from the room level or from the room bottom with a specified offset
New
Added an option to set the finishing wall height to a specified value
New
Added an option to offset the ceiling from the room top
New
Added the selection of hosts for finishing walls in linked files
New
Added support for key parameters when copying parameter values from the room to the finishing elements: the element is assigned a key with the same name from its key schedule
New
Added an option to offset the ceiling boundary into the room from the room boundaries
New
Added the "Merge wall finishing" option that allows creating finishing walls without merging them into a single wall
New
Added a progress window for creating and updating the finishing with the ability to interrupt the operation with the Esc key
New
Added filling of the finishing element parameters with a specified value
Improved
Changed the user interface for configuring finishing walls
Improved
Added the ability to collapse the finishing creation settings and give them a name
Improved
Added the ability to change the order of floor and ceiling types by dragging
Improved
Added copying and pasting of the rules for copying parameter values from the room to the finishing elements
Improved
Added display in the results of the rooms for which no linked finishing elements were found when filling parameters
Improved
Added a prompt whether to treat walls from 80 to 200 mm high as baseboards when linking the finishing to a room
Fix
Fixed an error due to which stacked walls from linked files were not taken into account as a host for finishing walls
Fix
Fixed the splitting of the floor and ceiling boundary into separate segments along one wall
Fix
Fixed the incorrect creation of door openings in some cases
Fix
Fixed the selection of types with the same name from different families
Fix
Fixed the overlap of finishing walls at the host junction when the finishing of one of the hosts consists of several parts by height
New
Added the ability to reset the scope boxes of views
Improved
Extended the logging when printing to PDF via a virtual printer
New
Added the "Determine family membership by calculation point only" option to the configuration settings for the InRoom and InSpace strategies
Improved
Accelerated the search for relationships in the InRoom, InSpace, InMass, InSolid and SolidTouch strategies during filling: relationships between two elements from linked files are no longer searched for, since values cannot be written to them
Fix
Fixed an error where, in the InRoom, InSpace, InMass and InSolid strategies, an element intersecting several parent elements was assigned only to the first one found
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Fix
Fixed an error that occurred if the common part of the imported file names is longer than the shortest file name
Fix
Fixed an error that occurred when importing into a document with existing layers of the same name if they are set as current or locked
Fix
Fixed an error in sheet format detection when there are user formats with similar sizes
New
Extended the self-update logging to determine the reasons for an incomplete module update installation
Fix
Fixed the crash of Revit 2025+ when exporting results to Excel
Fix
Fixed an error in searching for relationships for parts from an unloaded or nested link
Fix
Added case-insensitive recognition of the "And/Or" connector when importing from Excel
Fix
Added import of the data source file path from Excel even if the file does not exist
Fix
Moved the formula check during import from Excel to the stage after reading the fields
Fix
Removed the message about committing changes in the check mode
New
Added the "Properties copy" command for copying element properties without changing their type
Improved
The "Properties copy" command was renamed to "Copy of type and properties"
Fix
Fixed an error where empty numeric parameters of the source element replaced the target element values with zeros when copying properties
New
Added the choice of the decimal separator
New
Added copying of the total value to the clipboard by clicking the result field
New
Added the ability to collapse the window content
Improved
Added the ability to use both a dot and a comma to separate the fractional part in coefficients
Improved
Prohibited manual editing of the field with the total value
Fix
Fixed an error where fractional coefficients were not saved when the window was opened again
Fix
Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings
Fix
Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings
New
Added the choice of the decimal separator
New
Added copying of the total value to the clipboard by clicking the result field
New
Added the ability to collapse the window content
Improved
Added the ability to use both a dot and a comma to separate the fractional part in coefficients
Improved
Prohibited manual editing of the field with the total value
Fix
Fixed an error where fractional coefficients were not saved when the window was opened again
Fix
Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings
Fix
Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings
New
Added the choice of the decimal separator
New
Added copying of the total value to the clipboard by clicking the result field
New
Added the ability to collapse the window content
Improved
Added the ability to use both a dot and a comma to separate the fractional part in coefficients
Improved
Prohibited manual editing of the field with the total value
Fix
Fixed an error where fractional coefficients were not saved when the window was opened again
Fix
Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings
New
Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings
New
Added the choice of the decimal separator
New
Added copying of the total value to the clipboard by clicking the result field
New
Added the ability to collapse the window content
Improved
Added the ability to use both a dot and a comma to separate the fractional part in coefficients
Improved
Prohibited manual editing of the field with the total value
Fix
Fixed an error where fractional coefficients were not saved when the window was opened again
Fix
Fixed an error where a fractional coefficient selected from the list was not applied with some Windows regional settings
Fix
Fixed an error where a scale with a fractional part gave an incorrect total value with some Windows regional settings
New
Added consideration of phases when collecting apartments
New
Added the "Considering the filter" option to the "Numbering" tab
New
Added the ability not to close the plugin window after running commands
New
Added the ability to specify the configuration name when creating it
Improved
Reworked the interface of the existing window
Improved
Changed the logic of building the view tree to match the structure of the Revit Project Browser
Fix
Fixed an error in view search where dependent views were not found
Improved
Service update (internal changes)
Fix
Fixed a critical Revit error when selecting elements in the family editor
New
Accelerated the search for relationships in the InRoom, InSpace, InMass, InSolid and SolidTouch strategies: it is now performed only for elements of the categories specified in the filters
Improved
Added the "Copy identifier" and "Copy name" items to the context menu of the configuration list, the strategy list and the rule name row
Improved
Added the ability to specify strategy rules and set views by a mask (*, ?) in the automatic run
Fix
Fixed an error where re-importing a strategy gave the strategies the same identifier
New
Added downloading of updates from the server if the storage is unavailable
Improved
Added the ability to move sliders with the mouse wheel
New
Added buttons for expanding and collapsing the filter settings
Fix
Fixed the missing localization of the tooltip for the filter selection inversion button
Improved
Reduced the crop size change interval from 10 to 1
Fix
Fixed the "viewId is not valid for element iteration" error when searching in schedule filters
Improved
Added the ability to change the crop size slider value with the mouse wheel
Fix
Fixed an error where the installed components for nanoCAD were not detected in the change story
Fix
Fixed the incorrect collecting into one apartment of rooms from different apartments adjoining a common curtain wall
New
Added a palette for quickly running the strategies and rules of the current configuration
New
Added the ability to collapse and expand functions in the Formula Editor
New
Added highlighting of function contents in the Formula Editor
New
Added the ability to write comments in formulas
New
Added the ability to use Project Information parameters and global parameters in formulas
New
Added tooltips for functions in the Formula Editor
New
Added the SKIP_ELEMENT keyword to formulas, which allows excluding an element from processing
New
Added new functions: CVOr, HasValue, DocTitle, TargetBottomZ, TargetTopZ, SourceBottomZ, SourceTopZ, CCMin, CCMax, CRMin, CRMax, FindItem, Item, ItemIndex, Trim, RgxMatch, RgxReplace, GetCurrentViewParameter
New
Added new strategies: InAssembly, ViewSpecific, StairComponents, RoomOpenings, ManyToMany, RoomFinishing, OnLevel, RebarCouplers, LevelViews
New
Added saving of the "Selected" state for strategies and rules to a separate file
New
Added strategy pre-filters
New
Added the ability to assign names to rules
New
Added the ability to use conditional expression operators in formulas, which are processed in the "Check" mode
New
Added grouping of configurations
New
Added the ability to group target elements
New
Added aggregate functions (with the G prefix)
New
Added new write-back functions Min, Max, Avg, First, Last
New
Added new operators =| (contained in) and !=| (not contained in), as well as the related functions List, CCList, CRList
New
Added the ability to ask the user to perform synchronization
Improved
Reworked the design of the cell with formula options
Improved
Redesigned the window with the guide
Improved
Added expanding of results when the number of nested objects is less than 4
Improved
Reworked the RoomBoundaries strategy: it now processes not only vertical room boundaries but also horizontal ones
Improved
Added an error when, while getting an element parameter, it turns out that the element has several parameters with the specified name
Improved
Removed comma highlighting in the step-by-step calculation
Improved
Added display of the number of rules with processed expressions in the results window for strategies
Improved
Changed the function naming style from UPPERCASE to CamelCase
Improved
Added processing of the "Circuit Number" parameter
Fix
Fixed an error where text selection did not work in field editors
Fix
Fixed an error where function mapping did not work if there was no space before the function
Fix
Fixed an error where materials were processed twice by the Materials strategy when running processing in the document
Fix
Fixed an error where the CVIF function worked incorrectly if the column names were specified in lowercase
Fix
Fixed an error where the values for a reference parameter were searched only among the project instances
Fix
Fixed an error where the "Hide in view" and "Show in view" buttons were not displayed for all elements
Fix
Fixed an error that occurred in some cases when importing into a schedule
New
Added a new mini-plugin "Select Previous"
New
Added a new mini-plugin "Select Objects in Viewport"
New
Added a new mini-plugin "Select Objects from Field"
Improved
Added the ability to select several viewports at once to transfer their boundaries to the model in the "VP boundary in model" mini-plugin
Fix
Fixed an error that occurred when calling the "VP boundary in model" mini-plugin directly via the command
Fix
Fixed an error that occurred when trying to follow the link to the mini-plugins help
Fix
Fixed an error that caused Revit to crash when closing the plugin window
New
Added a window with an explanation when network errors occur
Fix
Fixed errors in configuration selection when switching views, after settings and when changing the operating mode
Fix
Fixed an error that occurred if the view's "Scope Box" parameter is not available for editing
Fix
Fixed saving of the customization menu file when the file is in use by another process
New
Added support for new languages: French, Portuguese (Brazil) and Uzbek
New
Added support for new languages: French, Portuguese (Brazil) and Uzbek
New
Added support for new languages: French, Portuguese (Brazil) and Uzbek
New
Added support for new languages: French, Portuguese (Brazil) and Uzbek
New
Added support for new languages: French, Portuguese (Brazil) and Uzbek
New
Reworked the interface of the "Grids mode" command and added the "Edit" option for selecting the end to switch: start, end or both
New
Reworked the interface of the "Show information" command
Improved
Added a notification about the absence of an element in the view for the "Zoom selected" command
Improved
Added resetting of the "Scope Box" parameter value for non-3D views
New
Added a plugin search
Fix
Fixed Revit freezing when selecting elements with complex families if "Built-in commands" is enabled
Improved
Improved the accuracy of finding intersections with the curve
Improved
Accelerated the processing of views with a large number of elements
Fix
Fixed an error where numbering by curve did not find elements whose representation in the view is drawn with 2D graphics
Fix
Fixed an error where numbering by curve was not performed in the order of the elements along the curve
New
Reworked the settings saving system: configurations are now used
New
Added the ability to remove the plugin from the context menu
Fix
Fixed an error where the filtering settings could be reset when the "Same types" option was disabled
New
Added consideration of command unavailability
Fix
Fixed an error where the row height in the tree changed on cursor hover
Improved
Prohibited accepting a condition with a value but without an attribute name in the attribute filter window
Improved
Prohibited accepting a condition with a value but without a parameter name in the parameter conditions window
Improved
Added ignoring of shared nested families
New
Added the ability to set a different rounding for areas with a factor
Fix
Fixed errors where data in the Apartment Editor was updated incorrectly
New
Added a new mini-plugin "Select Previous"
New
Added a new mini-plugin "Select Objects in Viewport"
New
Added a new mini-plugin "Select Objects from Field"
Improved
Added the ability to select several viewports at once to transfer their boundaries to the model in the "VP boundary in model" mini-plugin
Fix
Fixed an error that occurred when calling the "VP boundary in model" mini-plugin directly via the command
Fix
Fixed an error that occurred when trying to follow the link to the mini-plugins help in AutoCAD 2025-2027
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Fix
Fixed an error that occurred in some cases when duplicating a configuration
Fix
Fixed an error where parameters could be duplicated in the list of parameters available for search
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Improved
Fixed some interface issues
Fix
Fixed an error where Revit windows could not be opened while the plugin window was open
New
Added the ability to enable compact mode for the interface
New
Added the ability to enable compact mode for the interface
New
Added the ability to enable compact mode for the interface
New
Added the ability to enable compact mode for the interface
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
Added an explanation about the table size in the "Import from Excel" window
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed an error where the file could not be copied to the destination folder if the sheet group name contained consecutive dots
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed the incorrect bypassing of intersections by cable trays at a bypass angle of 90°
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
Display of the filter was added to the tooltip regardless of whether a name is present
Fix
Fixed an error in which the configuration was switched in some cases when changing the view
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
Added a prompt about changing the plugins' theme when closing the settings window
Fix
Fixed an error that caused the program to shut down when attempting to add layer standards or to add some standards to the drawing
Fix
Fixed an error in which vertically created dimensions were displayed incorrectly
Improved
The hatch patterns in the drop-down list were sorted by name
Fix
Fixed the plugin freezing in some cases when changing the hatch pattern type
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The arrangement of the buttons on the ribbon was changed to make it more compact
Improved
Added the "Text style" property for the "Fragment mark" object
New
Improved the accuracy of importing tables into a view: the column widths now match the sizes displayed in Excel in "Page Layout" mode
New
Added consideration of the sheet print scale ("Adjust to … % normal size"): the table in Revit gets the same size as in "Page Layout" mode
New
The text indent from the cell borders now matches Excel
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed an error in which the width of hidden columns was taken into account when importing merged cells
New
Added material presets — sets of properties saved to a file and available in any project
New
Added creation of a new material
New
Added display and editing of the name, description and keywords of the material appearance
Improved
In the "Show the materials of the selected elements" mode, the material is replaced only in the selected elements when possible
Improved
Added the ability to replace several selected materials with one new material in a single operation
Improved
Added filtering by material class in the "Materials" table
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed an error in which materials assigned to piping and duct system types were not taken into account when counting material usage
Fix
Element filter: fixed an error in which the "Absence of parameter" condition was saved incorrectly in group conditions
Improved
The type of created dimensions was changed from "aligned" to "linear"
Fix
Fixed the algorithm of the dimension grouping
Fix
Fixed an error that could cause some settings not to be saved
Improved
Improved the algorithm for selecting suitable views in the view alignment command
Improved
Service update (internal changes)
New
Added consideration of the invisible geometry of an element when no visible geometry is present during numbering along a curve
Fix
Fixed internal errors
Fix
Element filter: fixed an error in which slashes were duplicated in the parameter conditions after pasting from the clipboard
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
New
Added a function for selecting the direction of the dimension line created by the user with the "Line" tool
Improved
The interface was migrated to the current version of the ModPlus styling library
New
The interface was migrated to the current version of the ModPlus styling library
New
The interface was migrated to the current version of the ModPlus styling library
New
The interface was migrated to the current version of the ModPlus styling library
New
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
Search was added to the template, sheet and section type selection lists
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed internal errors
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
New
Added the ability to delete a row in the window for changing link paths
Fix
Fixed a synchronization error when switching from a 3D view
Improved
The priority of the FromRoom and ToRoom system properties of openings was increased when assembling apartments
Improved
Added consideration of families that can be room bounding
Improved
The interface was migrated to the current version of the ModPlus styling library
New
Added the new "Show information" command
New
Added the new "Disable temporary views" command
New
Processing of grids in the selected views was added to the "Grids mode" command
New
Added the new "Wall Join" command
Improved
The logic of the "Grid bubbles visibility" command was changed
Improved
Fixed the logic of the "Zoom selected" command
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The search for an intersection with a curve was changed: only the element geometry visible in the view is now taken into account
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
New
Added the ability to disable the automatic switching of the plugins' theme when the Revit theme is changed
New
Added an auxiliary local server that forwards requests to web services if internet access is blocked for a supported product
New
Added safe reading of system printers
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed an error in which the masking of the "Break Line" object did not change its layer when the object's layer was changed
New
Added the ability to exclude warnings from processing
New
Added the ability to filter the warning list
New
Added grouping and sorting of warnings
New
Added the ability to detach elements from the "Highlighted elements are joined but do not intersect" warning
Fix
Fixed an error when synchronizing 3D views
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed an error in which some views were not synchronized
New
Added the ability to resize the "Same parameters" area
New
Added the "Check all categories" and "Uncheck all categories" buttons
New
Added the ability to reinsert the last entered value in the search box
Improved
The logic of the "And"/"Or" filters was changed. A tooltip describing this logic was added
Fix
Fixed an error that could occur when closing Revit with the plugin open
Fix
Fixed an error in which the wrong shared parameter could be selected when loading a preset
Fix
Fixed an error in which the category list of the current view was not updated when switching views
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed internal errors
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
New
Added support for the dark theme in the properties palette
New
Added launching of the main ModPlus palette if the properties palette is docked to it
Fix
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed an error in which find and replace was not performed in the sheet number when the "Do not add numbering when possible" option was disabled
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Improved
The interface was migrated to the current version of the ModPlus styling library
Fix
Fixed an error that occurred when extending the floor into non-rectangular window openings
New
The command selection window was removed. The commands were moved to a drop-down button on the ribbon
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Fix
Fixed an error in which sheets were read incorrectly if the project contained sheet groups and sheet collections with the same name (Revit 2025 and later)
Fix
Fixed an error in which sheets were read incorrectly if the project contained sheet groups and sheet collections with the same name (Revit 2025 and later)
Fix
Fixed an error in which sheets were read incorrectly if the project contained sheet groups and sheet collections with the same name (Revit 2025 and later)
Fix
Fixed an error in which sheets were read incorrectly if the project contained sheet groups and sheet collections with the same name (Revit 2025 and later)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Improved
Service update (internal changes)
New
Added logging for the services that notify about the need to synchronize and save
Improved
Service update (internal changes)
Improved
More diagnostic information was added to the logging output
Fix
Fixed an error that occurred when replacing blocks or objects located on locked layers
Fix
Fixed an error in which commands that cannot be launched could get into the "Recent" list
Fix
Fixed an error in which the plugin did not start in some projects
Fix
Fixed an error in which the compatibility of some views was determined incorrectly
New
In window mode, the ability to collapse the window contents was added
New
Local logging was added
New
Added tracking of the time between key presses when opening the filter with a keyboard shortcut
Fix
Fixed several errors that could cause projects to load slowly
Improved
Improved the algorithm for selecting views for synchronization
Improved
Improved the performance of copying view templates
Fix
Fixed an error when copying filters with invalid fill patterns
New
Added the ability to collapse the window contents
Improved
The restriction principle of the free plugin version was changed
New
Added the ability to collapse the window contents
Improved
The restriction principle of the free plugin version was changed
New
Added the ability to enable the display of the palette with a warning about operating limitations
New
Added the ability to color filters
New
Added the ability to leave only the icon on the ribbon tab
New
Added the ability to leave only the icon on the ribbon tab
Fix
Fixed internal errors
Fix
Fixed an error in which updates were not installed if Revit service processes were running
New
Added search by search scopes
Improved
Added a restriction on selecting "Roofs by Extrusion"
Improved
The icon was replaced
New
Added the ability to hide the "Search" section
New
A settings window was added in palette mode
New
Added display of keyboard shortcuts
New
Added the ability to drag commands in the "Favorites" section
New
Added a command weighting system: more frequently used commands appear higher in the search results
New
Added autocomplete when searching for commands
New
Added handling of an incorrect keyboard layout when entering a value in the search box
New
Improved command search
New
Added a warning about the incorrect operation of some commands when launched from the palette
Fix
Fixed an error that prevented the use of the new layout creation function
New
The update extraction algorithm was replaced
Fix
Fixed an error in which filters from view templates were not copied
Fix
Fixed an error in which find and replace did not work in the view name
Fix
Fixed an error in which find and replace did not work in the view name
Improved
The maximum value for the bottom offset and top offset of horizontal reinforcement was increased from 250 mm to 750 mm
Improved
The code of the "Технологические решения" section was changed from ТХ to ТР
Improved
Added the ability to disable the ModPlus icon on the ribbon tab
Improved
Added the ability to disable the ModPlus icon on the ribbon tab
Fix
Fixed an error that occurred when closing the view selection window if no view was selected
New
Added configurations
New
Added the ability to invert the filter in the settings
Improved
Added navigation to the plugin page with version selection when clicking the "Buy" button
New
An icon was added to the ribbon tab
Improved
Improved the algorithm for finding doors and windows in curtain walls
New
Added grouping by category type in the category selection dialog
New
Added the "Check open views" button in the view selection window
New
Added search for parameter values on the current view in the window for setting up element filters by parameters
New
Added support for special parameters in the parameter value search in the window for setting up the element filter by parameters
New
Added the "Saturated colors" option to the save and synchronize notification services. Improved color combinations
New
Added presets in the window for setting up the element filter by parameters
New
Added a new built-in command "Select annotations" that allows selecting annotations related to the selected model elements on the current view
New
Added the ability to add elements to the current selection while holding the Ctrl key for built-in commands that change the element selection
New
Added the ability to show the document title when multi-row tab display is enabled with the "Each document on a new row" option
Improved
Fixed the display of fill patterns and eliminated preview freezes
Fix
Fixed an error where watermark overlay did not work in Revit version 2025 and above
New
Added an "All" option to the list of available product versions in the "Plugins" window
New
Improved interaction with the context menu
Improved
Removed the expiring-subscription notification when a new subscription already exists
Fix
Fixed a bug where the toggleable "Appearance" menu was not taken into account in the menu settings window
New
Added a command for aligning title blocks
Improved
Added the ability to select views via the browser in the title alignment command
Improved
Added display of sheet dimensions in the view alignment command
Fix
Removed an incorrectly displayed empty block preview image
Fix
Fixed incorrect height assignment to finishing walls in some cases
Fix
Fixed incorrect wall finishing creation when wall segments are present in the upper part of the room
Fix
Fixed an error where sheets were not copied when the "Copy sheet parameters" option was enabled
New
Added search in dimensions on the current view and in the entire document
New
Added support for configurations
Improved
Added preview of the replacement result
Fix
Changed the highlight color
New
Discontinued plugin support for Renga versions 9.2 and above
New
Added "3D View Boundaries" checkbox
New
Added crop size control using numeric input (in percent)
Fix
Fixed an issue where created dimensions were not annotative when assigned annotative styles
New
Added "Nearest below" and "Nearest above" options for level selection
New
Added consideration of level visibility
New
Added support for Organization Settings
New
Added configuration export/import
Improved
Changed the logic of the "Nearest" option: now the truly nearest level is selected
Fix
Fixed incorrect finishing update when copying rooms
Fix
Fixed an error where the path replacement tool did not change the server address
Fix
Fixed an error where the title block was duplicated when the "Copy typical annotations" option was enabled
New
Redesigned the "Components" window
Fix
Fixed a bug where the general version was calculated incorrectly
Improved
Added the "Ceilings" category to the cut categories list
Fix
Fixed an error where the plugin window could be opened multiple times
New
Settings window integrated into the main command
New
Redesigned the settings window in the configurations section
New
Removed the command for editing settings
New
Plugin converted from palette mode to window mode
Improved
Added consideration of the title block insertion point difference
Fix
Fixed a viewport alignment error where their offset in the model was not taken into account
Improved
Added prevention of closing the window with Esc after duplication has started
Improved
Added prevention of closing the window with Esc after duplication has started
Fix
Fixed an error where rooms could be merged into one apartment through windows placed in curtain walls
New
Added "Reinforcement" tab
New
Added dimension type selection on all tabs
New
Added processing of elements from linked files on all tabs
New
Added "Transverse dimension from the wall end" option on the "Walls" tab
New
Added "Consider view range" option on the "Walls" tab
New
Added "Non-integer dimension values only" option on the "Walls" tab
New
Added the ability to select the number of dimensions on the "Columns" tab when a column is intersected by a grid
Improved
Changed the limitation principle of the free plugin version
Improved
Fixed the logic: in the "Floors" section, dimensions are placed on elements that create openings
Fix
Fixed an error in the command name that made it impossible to invoke via the ribbon button
Fix
Fixed an error where grids were not processed in some cases
Fix
Fixed an error occurring in some cases when creating baseboards
Fix
Fixed an error that occurred when merged documents contained invalid image references
New
Added the ability to copy text only to polyline vertices
Fix
Changed the placement of buttons for working with the element list
New
Added "Raster Quality" option to the PDF export settings
New
Added the ability to automatically open imported documents to initialize the sheets they contain
New
Added the "Update Elements" button
New
Added the ability to ignore nested elements
New
Added support for the view phase
Improved
Added support for revision clouds
Improved
Changed the appearance of the window
Improved
Added handling of the window/door phase when retrieving the value from the special ToRoom, FromRoom parameters
Improved
Added handling of an open nanoCAD application
Improved
GOST R 52544 marked as "Inactive"
Improved
Added additional characteristics to GOST 34028
Fix
Fixed an error occurring in some cases when attempting to disconnect an element from the system
New
Added support for nanoCAD
New
Added support for text parameters
New
Added the ability to enter a custom coefficient
Fix
Autosave service: fixed the reappearance of the autosave suspension notification after synchronizing the document with central
Fix
Autosave service: fixed the appearance of autosave service notifications after disabling the service in settings
Improved
Changed the method of coloring auxiliary lines: view-level graphics overrides are now used instead of modifying the shared line subcategory, which eliminates ownership conflicts in workshared files
Improved
Changed the method of coloring auxiliary lines: view-level graphics overrides are now used instead of modifying the shared line subcategory, which eliminates ownership conflicts in workshared files
Fix
Fixed an error occurring when attempting to switch the active view to an unsaved document
Fix
Changed the method of coloring auxiliary lines: view-level graphics overrides are now used instead of modifying the shared line subcategory, which eliminates ownership conflicts in workshared files
Improved
Added rounding of the area coefficient to four decimal places
Fix
Fixed a bug occurring in some documents when selecting table cells
Fix
Changed the method of coloring auxiliary lines: view-level graphics overrides are now used instead of modifying the shared line subcategory, which eliminates ownership conflicts in workshared files
Improved
Added consideration of the selected rebar shape style when populating the hooks list
Improved
Added consideration of the selected rebar shape style when populating the hooks list
Improved
Added consideration of the selected rebar shape style when populating the hooks list
Improved
Added consideration of the selected rebar shape style when populating the hooks list
Fix
Fixed an error that occurred when filling parameters after canceling room selection
Fix
Fixed an error that in some cases prevented the plugin from being relaunched
Improved
Improved work with rectangular stirrups in transverse reinforcement settings
Improved
Improved work with rectangular stirrups in transverse reinforcement settings
New
Added the ability to collapse the window content
Improved
Removed the application of random colors when copying a condition by parameter values
Fix
Fixed an error where the entire configuration storage file was exported instead of the current configuration
Fix
Fixed a bug causing the right-click context menu to be permanently disabled when switching to the start tab for document selection
Fix
Fixed a bug causing the right-click context menu to be permanently disabled when switching to the start tab for document selection
Fix
Fixed an error where upper grid parameters were written to the lower grid when creating reinforcement with individual bars with the option to repeat upper grid reinforcement settings enabled
Fix
Fixed a bug occurring when switching to the start tab for document selection
Fix
Fixed a bug causing the right-click context menu to be permanently disabled when switching to the start tab for document selection
Fix
Fixed a bug causing smart object property processing to be disabled when switching to the start tab for document selection
Improved
Added display of element IDs in the error handling window
Improved
Added the ability to copy element IDs to the clipboard in the error handling window
Fix
Fixed an error where link path replacement ended with an uninformative message without indicating the cause
Fix
Fixed an error where extended element data was not read when the project contained multiple schemas with the same name
Fix
Fixed a bug causing AutoCAD to shut down when switching to the start tab for document selection
Fix
Fixed a bug causing AutoCAD to shut down when switching to the start tab for document selection
Fix
Fixed the behavior of the exclusion color editing window when changing focus
Improved
Added saving of the simple numbering start value
Improved
Added license filtering by Renga version in the Personal Account
Improved
Changed the intersection group unavailability condition: the group is unavailable for selection if all intersections in the group have an undefined type
New
Added a built-in highlight service on the ModPlus Ribbon
Fix
Fixed incorrect host filtering in certain cases when creating wall finishing
Improved
Added a selection filter for the same rebar set when selecting the split point in the rebar set splitting command
New
Added new smart object "Power Line"
Improved
Added a new arrow type "Simple Arrow with Tick" for the smart object "Arrow line"
Improved
Added the ability to mask one of the sides for the smart object "Break Line"
Improved
Added multiline support for the smart object "Multiline leader"
Improved
Added the ability to specify units of measurement in a separate column for the smart object "Multiline leader"
Improved
Added the ability to group saved rows of the smart object "Multiline leader"
Improved
Improved the algorithm of the built-in command for selecting room-bounding elements
Improved
Added consideration of unplaced rooms during the check before starting collection or apartment calculation
New
Added area reinforcement parameters when creating Area Reinforcement for each mesh
Improved
The offset of the outermost bar when creating background reinforcement with Area Reinforcement has been changed from bar face alignment to bar center alignment
Fix
Fixed a bug where structural reinforcement parameters were not set in some cases when creating all background reinforcement with a single Area Reinforcement element
Fix
Fixed an error in the helper method that merges collinear segments
New
Added an option to configure behavior when material names match
New
Added an option to close open schedules after copying
New
Added regular expression search mode
Improved
Removed the level adjacency check when merging apartments into a multi-level apartment
New
Added search for parameters with empty values
Improved
Added validation of invalid characters in names
Improved
Added display of the sheet name for schedules
Improved
Added the ability to merge apartments located on different levels
New
Added local logging
Improved
Improved interaction under weak network connection
Improved
Service update (internal changes)
Improved
Added replacement or removal of characters invalid for saving in XML from the added note
Improved
Added replacement or removal of characters invalid for saving in XML from the added note
New
Added grouping of cleanup options in the "Basic cleaning" tab
New
Added "Line Patterns" tab
New
Reworked the cleanup option processing mechanism in the "Basic cleaning" tab
Fix
Fixed an error with deleting the active view
Fix
Fixed an error with deleting unused elements
Fix
Fixed an error with deleting view templates
Improved
Added an improvement to the schedule view import algorithm that prevents the appearance of empty rows
Fix
Fixed an error where opening the plugin window caused Revit to freeze
Fix
Fixed an error where RSN// was substituted for any new path
New
Added the ability to close selected favorite views
Improved
Optimized tab coloring algorithms
Improved
Changed the default starting numbering value from 0 to 1
Improved
Improved the tab sorting algorithm
Fix
Fixed an error where an incorrect view range was assigned to the view template
Fix
Fixed an error where checking a folder in the Revit Server tree did not check all nested folders and models
Fix
Fixed an error where the notification about suspending document autosave was not shown after several failed save attempts
Fix
Fixed an error where categories unavailable for parameter binding were checked in the category selection dialog when selecting categories from the current view
Improved
Changed the bypass direction detection "left/right": the side is now determined relative to the active view, not based on the MEP curve direction
New
Added support for Revit Server
New
Added disabling of worksets by substring
New
Added workset assignment to type and instance
New
Added the ability to copy model views placed on sheets
New
Added the ability to collapse the window content
New
Added the ability to select all insertions in the project that are selected in the list
New
Added the ability to update linked DWG insertions
Fix
Fixed an error occurring when rotating trays horizontally
Improved
Added correct handling of models located in cloud storage in the autosave service
New
Added a note in the plugin manager for plugins whose usage is restricted by organization settings
Fix
Fixed some errors
Improved
Improved the menu creation algorithm to account for the ability to disable the parent plugin while nested plugins remain enabled
Improved
Improved the menu creation algorithm to account for the ability to disable the parent plugin while nested plugins remain enabled
New
Added the ability to skip loading of plugins restricted by Organization Settings
New
Added the ability to skip loading of plugins restricted by Organization Settings
New
Added the ability to skip loading of plugins restricted by Organization Settings
New
Added selection of recent values
Improved
Improved UI/UX
Improved
Migrated to standard ModPlus filters
Improved
Improved work with configurations
Fix
Fixed an error that occurred when insulation was present during intersection bypass creation
Fix
Fixed an error that allowed selecting family instances of all categories when the "Beams and Columns" category was selected
Fix
Fixed an error occurring when attempting to bypass a vertical column from a linked file
Fix
Correct handling of conditions with special characters (" and <>) inside operands
Fix
Fixed a bug where block definitions could be deleted prematurely
Fix
Fixed a bug where it was not possible to delete block definitions when replacing blocks with the "similar" option
Fix
Autosave service: fixed an error occurring when trying to open the backup storage folder in Revit 2025–2027
Improved
Service update (internal changes)
Improved
Service update (internal changes)
Fix
Fixed an error where the plugin icon was not displayed
Fix
Fixed the cause of the "Circular reference detected while serializing object of type ModPlus_Revit.Models.RevitBuiltInCategory" error that could occur when loading configurations created in a later Revit version
Fix
Fixed an error where the plugin icon was not displayed
Fix
Fixed a bug where the plugin could cause AutoCAD 2025-2027 to crash when trying to follow a link to the instructions
New
Added support for ceiling plan
Fix
Fixed an error where filtering by component did not work in the changelog
Fix
Fixed an error where built-in commands were added to a different tab when certain plugins were installed
Fix
Fixed an issue where an error could be displayed in the results window after installing new plugins
Improved
Removed saving of the selected section
Fix
Fixed an error where the current view could be determined incorrectly
Improved
Increased the maximum baseboard height to 200 mm
New
Added logging for the built-in commands service
Improved
Added view existence check in the view switch event handling
Fix
Added error handling for errors that may occur when locking an apartment
Fix
Fixed a rounding error when using the SUM function in Revit version 2025 and above
Improved
Added rounding of the value with coefficient to 9 decimal places
Fix
Tab coloring: fixed an error where the document name and view name settings were not applied to family documents
Improved
Improved the algorithm for checking the connection to the installed Renga version
Improved
Added exception handling for errors occurring when loading the levels list
New
Added settings with visibility change options for views with an applied template
Fix
Fixed an error in baseboard creation when door openings with different phases are present
Fix
Fixed an error that occurred when extending the floor into door openings in the presence of manually created baseboards
Improved
Increased the tolerance for numeric value comparison
Improved
Increased the tolerance for numeric value comparison
Improved
Increased the tolerance for numeric value comparison
Improved
Increased the tolerance for numeric value comparison
Fix
Fixed an error occurring when checking the visibility of links
New
Improved finishing update in previously processed rooms: all creation steps are now restored, not just the last one (for rooms from older plugin versions, the finishing needs to be recreated)
Fix
Fixed an error where the floor was not created in the presence of rectangular columns in Revit 2019–2021
Improved
Changed view processing logic: the view template is ignored if the view has temporary view properties enabled
Fix
Fixed UI in dark themes
Fix
Tab coloring: change the color of the text and the tab close button only when the tab background is colored
Fix
Fixed an error where the palette did not open in some cases when opening a document
Fix
Fixed an error where the palette did not open in some cases when opening a document
Improved
Expanded the error message that occurs when a panel has not been registered
Improved
Expanded the error message that occurs when a panel has not been registered
Improved
Added intermediate formula output with parameter value substitution in the step-by-step calculation
Fix
Fixed an error where double-precision numbers with small values were processed incorrectly
Fix
Multiline leader: fixed a bug where lines could shift from their positions when using certain fonts
Fix
Fixed an error where upper and lower U-shaped bars were duplicated in the opening framing
New
Added processing for Railings
Fix
Fixed an issue where slabs in the "Structural Foundations" category were not processed
Fix
Fixed an issue where updates could fail with a file access error despite a successful permissions check at startup
New
Added the ability to assign layers to commands
Fix
Fixed an issue where imported saved layer values for blocks by name were not displayed
Improved
Improved the algorithm for determining text position within table cells
Fix
Fixed an issue where text inside cells could only have 4 rotation options
Fix
Fixed an error where after duplicating a configuration, group changes were applied to both configurations
New
Added the ability to set text style for the "Multiline leader" object
Fix
Fixed a bug where the shelf width of the "Multiline leader" object could be calculated incorrectly
Fix
Fixed an error where the slab contour was not detected when reinforcing with multiple Area Reinforcement elements
Fix
Fixed excessive growth of autosave service log files and infinite attempts to save read-only documents
New
Family selection context: added the ability to select and delete multiple families
New
Family editor: added support for multiple parameter selection in the parameter import window
New
Parameter creation: added the ability to change the position of parameters in the table of created parameters
Fix
Family editor: fixed an error where batch moving of parameters did not work in the parameter order change dialog
Fix
Project parameter editor: fixed an error where the parameter type changed from "Type" to "Instance" when changing the category binding
Fix
Fixed the sorting method where numbers with a prefix or suffix were sorted as strings
Fix
Fixed an error in the "Disconnect from System" command that occurred in some cases
New
Added new command "Disconnect from System"
Fix
Fixed a crash when inserting a table in certain drawings in AutoCAD
Improved
Added automatic expansion of the window content when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Added automatic expansion of the window content when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Added automatic expansion of the window content when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Added automatic expansion of the window content when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Added automatic expansion of the window content when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed an error where the overall version was calculated incorrectly in some cases
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Improved
Expanding the plugin window content if the window was already open and the content was collapsed when the plugin is relaunched
Fix
Fixed an error where continuous numbering did not work when numbering along a curve
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed "Method not found" error occurring in Revit 2027
Fix
Fixed an error where find and replace parameters were filtered out due to the view template influence
Fix
Fixed an error where find and replace parameters were filtered out due to the view template influence
New
Added helper methods to resolve compatibility issues with Revit 2027
Fix
Fixed localization error
Improved
Optimized work with local plugin files
New
Added the ability to use title block parameters in the file name mask
New
Added support for Revit 2027
New
Added new command "Finish Management"
New
Added new tab "Parameter Filling"
New
Added option to select bottom offset reference - from level or from bottom of room
New
Added parameter value update for manually added finish elements
Fix
Fixed various bugs
Fix
Fixed a bug where viewports could disappear during merging
Fix
Fixed a bug where the nearest level was incorrectly determined in some cases
Improved
Removed the restriction on running in a family document
New
Added progress counters for object processing within the drawing and for sheet merging
New
Added the ability to cancel processing
Fix
Fixed a bug where AutoCAD could slow down significantly after performing a layout merge
Fix
Fixed a bug where viewports could disappear from layouts after reopening the drawing
Fix
Fixed the vport3 error occurring after processing certain documents
New
Added support for doors from curtain wall systems
New
Added support for AutoCAD 2027
Fix
Fixed a bug occurring when the schedule name contains invalid characters
Fix
Fixed a bug occurring when the top left corner was selected as the anchor when detecting text position in a cell
Fix
Fixed a bug when copying the crop region of sections
Fix
Element Filter: fixed a bug where elements were incorrectly filtered by parameters specified by system name in some cases
Fix
Fixed a bug where errors occurring during a failed parameter definition change were not written to the results window
Fix
Fixed a bug where importing actions from Excel was not working correctly
Improved
Using the system tooltip instead of a custom tooltip
Fix
Fixed a bug where built-in commands were not displayed if the "Structure" tab was hidden in some versions of Revit
Improved
Added the ability to keep the plugin window open after duplicating views
Improved
Improved tooltip behavior
Fix
Fixed a bug where the original legend views were not copied to the sheet
Fix
Fixed a bug in the parameter collection method
Fix
Element Filter: fixed a bug where the parameter condition row was not updated in some cases
Improved
The type loading algorithm has been optimized
Fix
Fixed a bug with filters being duplicated with an incorrect name
Improved
The dependent view processing algorithm has been updated
Improved
The "Massing" category has been added to the list of available categories for joining
Fix
Fixed a bug where the "All" option was always selected in the toggle menu when Revit started
New
Added "Select Views" buttons
New
The Favorite Views list is now displayed as a tree, like the left panel
Improved
Views are organized the same way as in the Project Browser, including dependent views, but views are selected and processed independently of each other
Improved
View lists for assemblies are displayed the same way as in the Project Browser
Fix
Fixed a bug with moving views to the Favorites list
Improved
Improved the conditional expression evaluation algorithm
Improved
Save Notification Service: added tracking of saves during synchronization
Fix
Element Filter: fixed a bug where the "Does Not Equal Yes" check for Yes/No parameters was not working correctly
New
Added group copying
New
Added Scope Box copying
New
Added Project Browser organization copying
Fix
Fixed a bug occurring when filter names match
New
Added configurations
New
Added drop-down lists for assigning parameters from available and matching data type options
New
Added the ability to specify material layer types for writing to the structure
New
Added the ability to enter text without numbering for the first line
New
Added the ability to merge identical layers
New
Added instance and type parameters for writing the result. The instance volume is written to the instance parameter, the total volume from all instances is written to the type parameter
New
Added the ability to disable layer numbering
New
Added the ability to display only structures that have been modified. Only for structure to parameter
New
Added the ability to change the value of the selected material parameter when generating the structure
Fix
Fixed a bug due to which the smart object "Arrow line" was paid
Fix
Fixed a localization bug
New
Added the ability to find existing numbering in the sheet and view name and increment it
New
Added the ability to copy floor plan views placed on sheets with the level changed to the one above
New
Added the ability to search and replace in parameter values for copied schedules
New
Added the ability to move sheet duplicates to other collections
New
Added the ability to define a list of parameters whose values need to be cleared
New
Added the ability to increment the value of schedule filters
New
Added the ability to open created sheet duplicates after the plugin finishes
New
Added the ability to keep the plugin window open after duplicating sheets
New
Added the ability to increment parameter values
New
Added the ability to increment values in sheet names
New
Added the ability to find existing numbering in the view name and increment it
New
Added the ability to select view parameters for clearing values
New
Added the ability to create floor plan views for upper levels
New
Added the ability to increment the value of schedule filters
New
Added the ability to open created view duplicates after the plugin finishes
Fix
Fixed a bug that caused rectangular connectors to not connect in some cases
New
Added new smart object "Polar Axis"
New
Added new smart object "Multiline leader"
New
Added new linear smart object "Arrow line"
New
Added the ability to change common properties for multiple types of smart objects at once
New
Added the ability to change the color of strokes and gaps in the "Waterproofing" object
Improved
A grip for changing the hole type has been added to the "Hole filling" smart object
Improved
The default hole type of the "Hole filling" smart object has been changed
Fix
Fixed a bug that prevented setting a smart object style as current immediately after creation
Fix
Fixed a bug occurring when entering an empty value in the linear smart object "Letter Line"
New
Tab colorization: added the ability to change the size of the active tab
New
Tab colorization: added the ability to change the opacity of inactive tabs
Improved
Tab colorization: adjusted colors of standard color schemes
Improved
Tab colorization: changing the color of the tab close button
Fix
Fixed a bug where the method for removing zero segments from dimensions sometimes worked incorrectly
Fix
Fixed a bug in the "Multibuild" command when the source MEP curve has no system
Improved
Added the ability to collapse window content
Fix
Fixed some bugs
Improved
Improved condition checking algorithm with whitespace handling
Fix
Fixed a bug where zero segments were incorrectly removed from dimensions in some cases
Fix
Fixed a bug where disabled notification levels were taken into account in notification services (about saving, about synchronization)
Fix
Fixed the "Method not found" error occurring when launching the plugin
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Element Filter: escaping commas when inserting a parameter value from the list of found values
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
Improved
Window background change when collapsing window content
New
Added support for processing elements with an active schedule view
Fix
Fixed a bug that prevented floor parameters from being updated
Improved
Improved apartment sorting algorithm
Fix
Fixed an error that occurred when splitting a rebar bar resulted in near-zero-length segments
New
Added a notification service for the need to save the document
New
Added the ability to move each document to a new row in multi-row tab display
New
Added the ability to color the right border and all four borders in tab coloring
New
In tab coloring, the text color is now set for each fill color
New
Added the ability to define custom settings for coloring family document tabs
New
In the element filter by parameters, the validation logic for the key parameters Parent, Nested, Curtain, AreaScheme has been changed
New
A new key parameter InMEPSystem has been added to the element filter by parameters
New
A new special parameter InRebarSystem has been added to the element filter by parameters
New
A new special parameter DocumentTitle has been added to the element filter by parameters
New
The display of key parameters has been changed in the parameter selection control
New
A condition has been added to the element filter by parameters to check whether a parameter is editable
New
A control for searching parameter values has been added to the parameter filter settings window
New
A "Clear" option has been added to the parameter filter settings window
New
The storage principle for built-in command settings has been changed: previously enabled commands were saved, now disabled commands are saved
New
Added a built-in command "Select System"
New
Added a built-in command "Apply to View" that allows setting the selected visibility range for the current view
New
Search has been added to the "Favorite Commands" window
New
Added a localized message in case it is impossible to update the link
Fix
Fixed an issue where it was impossible to remove internal insulation (external insulation was always removed)
Fix
Fixed an issue where insulation could not be assigned if the element already had insulation
Fix
Fixed an issue where detection of used sheet numbers within the sheet collection worked incorrectly (Revit 2025 and later)
Fix
Fixed an issue where checks with the >= and <= conditions were processed incorrectly
Improved
Updating standard menus from the file storage, instead of the website
Fix
Fixed an issue where for some elements the inclusion within a solid could be determined incorrectly
Improved
Correct handling of a space within quotes in the STRINDEX and LSTRINDEX functions
Fix
Fixed an issue where a previously created floor was not deleted in Revit 2021 and earlier
Fix
Fixed an issue that caused a fatal error in Revit 2026 when opening the wall type editor with preview
New
Added numbering direction options "Left to right", "Right to left", "Top to bottom" and "Bottom to top"
New
Added the "Model Elements" tab
New
Added family copying
New
Added hatch pattern copying
New
Added copying of conduit standards
New
The plugin window is now modeless (does not block the Revit window)
Improved
Removed the event log
Improved
Added switching to the target document
Fix
Fixed some issues
Improved
Improved the algorithm for evaluating conditional expressions
Fix
Fixed an issue where some properties did not change after loading saved reinforcement settings
Fix
Fixed an issue where some properties did not change after loading saved reinforcement settings
Fix
Fixed an issue where plugins were not loaded in the plugin manager when there was no internet access
Fix
Fixed an error that occurred when loading the plugin if the project contained types with identical names
Fix
Fixed an issue where areas were always rounded to 3 decimal places in Revit 2019, 2020
New
Added the ability to copy only the crop height of views for sections and elevations
New
Changed the processing of dependent views. Dependent views are now grouped with the parent in the view selection tree. When selecting the parent, crop copying is applied to all dependent views
Improved
Fixed the logic for copying the crop shape. A rectangular crop is copied without converting to a sketch, a custom shape is copied as a sketch
Fix
Fixed an error in checking pinned views
New
Added a new command "Update Room Finishing"
New
Added the ability to specify multiple bases for finishing walls and set a filter for the bases
New
Added skirting board creation
New
Added the option "Extend floor to the middle of the door leaf"
New
Added the ability to set a negative ceiling offset
New
Added the ability to set a negative offset for finishing walls
New
Added the ability to create finishing walls as compound walls and to use compound walls as a base
New
Added the option "Process floor-to-ceiling windows"
New
Added creation of finishing walls above curtain walls
New
Added the ability to define the join type of finishing walls
Fix
Localization bug fixed
Fix
Fixed an issue that caused created objects not to change their layer according to the settings of the ModPlus "Auto Layers" plugin
Fix
Fixed an error that occurred when attempting to select an invalid room
Fix
Fixed an error that occurred when two GridLines were located on the same line in a curtain wall
New
Added the ability to sum areas by levels in multi-level apartments
New
In all sources and classification conditions, the ability to duplicate records in tables has been added
New
Added the ability to populate the "Functional purpose" parameter for rooms whose names are present in the current room matrix
New
A button has been added in the room matrix to select a room name from the list of room names of the current document
New
Added the ability to use numbers with leading zeros in apartment numbering
New
Added the ability to keep apartment types unchanged during recalculation
New
Room numbering settings have been added. They include number format settings and the ability to reset numbering in multi-level apartments
Improved
Consideration of minimum and maximum area boundary values when classifying apartments
Improved
Improved analysis of openings that lack a reference to the host object
Fix
Fixed an issue where apartment numbering worked incorrectly in some cases
Fix
Sorting has been removed from the classification conditions table
Fix
Some bugs have been fixed
New
On the "By sections" tab, the ability to export to dwg and dxf has been added
Fix
Fixed an issue where nested categories were not recognized when inserting categories from a string in the element filter
New
Added the ability to determine matching of dynamic blocks by different parameter types
New
Added the ability to determine matching of dimensions by the global scale of their dimension style
Fix
Fixed long module loading when there are issues with the internet connection
Fix
Fixed incorrect detection of connectors on MEP curves when insulation is present in the "Connect connectors" command
New
The plugin startup logic when attaching to the main ModPlus palette has been changed. Now, if the palette is closed, it will also be launched when the plugin starts
Improved
Ignoring errors that occur when searching for overlying floors
Fix
A bug has been fixed in the command "Connect straight" that occurred when selecting elements with insulation
Fix
A bug has been fixed that could cause rotation angles to be calculated incorrectly when replacing existing blocks with the option to copy the transformation or rotation
New
A new command "Quadrilateral by points" has been added
New
A new command "Create objects at intersection points" has been added
New
The method of obtaining curves and objects from the user in the command "Split curve at intersection points" has been changed. It is now possible to select multiple polylines, and an additional selection has been added for objects that will be considered when determining intersections. If nothing is selected in the second selection, all objects in the drawing will be considered
New
In the command "Building the middle line", the dialog at the end of execution has been removed. It has been replaced with command-line input with "Yes" set by default
New
A bug has been fixed in the command "Building the middle line" that caused the last point not to be calculated
New
A bug has been fixed in the command "Split curve at intersection points" that caused objects from other Layouts to be considered when calculating intersections
Fix
The name of the "ООС" section has been changed
Fix
Fixed an issue where inclusion in a solid might not be detected for some elements
Fix
Fixed an issue where undoing the cut did not work in some cases
Improved
Optimization of searching for overlying elements
New
Added support for inclined lines
New
Added tolerance for cell boundaries
Fix
Fixed an issue where text rotation was incorrectly detected in custom coordinate systems
New
Added the "Plugins" menu item
New
Added the "Menu" menu item
New
Added the "Personal account" menu item
New
Added "General settings", "License server settings", and "Proxy settings"
New
Removed the "Open Configurator" menu item
New
The Configurator has been removed from the "Components" section, from the overall version calculation, and from update checks
New
The Configurator has been removed (it will be deleted by the auto-update module)
Improved
Loading the adaptation menu from a file located in the UserData folder, if it exists
Improved
Loading the adaptation menu from a file located in the UserData folder, if it exists
New
Added an option to select elements from links
New
The plugin button is duplicated on the standard "View" panel of the "Modify" tab
New
Automatic orientation according to the direction of the selected element(s)
New
Added the "Manual Orientation" mode
Fix
Fixed incorrect offset of MEP curves in some cases when running the "Set Distance" command
Fix
Fixed incorrect offset of MEP curves in some cases when running the "Set Distance" command
Fix
Fixed an error where fill patterns did not appear in the list when creating a fill pattern from a file
Fix
Fixed a localization error
Fix
Some localization errors fixed
Fix
Fixed an error where the check for intersection with solids from linked files did not work
New
When creating the name of the combined sheet, parameters are now taken from the first sheet of the sheet group
Improved
Improved the algorithm for determining whether one solid intersects another using auxiliary rays
Improved
Improved the algorithm for determining whether one solid intersects another using auxiliary rays
Fix
Fixed a localization error
Fix
Fixed the UI in the formula import window
Fix
Fixed an error where detail lines and model lines were not processed
New
Added the ability to sort sheets by name when displaying all sheets in a single group
Fix
Fixed an error where sheets from assemblies were not displayed when there were no regular sheets in the project while displaying sheets in a single group
New
Optimized search for element relationships
Fix
Fixed an error during export of results to Excel that occurred with a large number of element identifiers
Fix
Fixed some errors
Fix
Fixed an error where in some cases elements were sorted incorrectly in the view
Fix
Fixed a bug that caused the delete button for the layer rule by block name to remain permanently inactive
Fix
Fixed a bug that could cause objects to be moved to specified layers when using their grips
Improved
Improved intersection checking of solids using auxiliary rays when the solids have complex shapes
New
Improved algorithms for handling variable-height rebar when exploding and splitting
Improved
Skipping loading of links whose document could not be retrieved
Improved
Removed pre-check for solid geometry in families when attempting to join them with other elements
Improved
Correct highlighting of commas that are not part of functions in formulas
Fix
Fixed an error where certain strategy properties were skipped when duplicating them
Fix
Fixed an error where in some cases custom function names were applied incorrectly
Fix
Fixed an error where search could fail in the view selection window
New
Added the ability to collapse/expand the window content
Improved
Correct handling of families whose geometry consists of nested families
Fix
Correct display of the standard configuration name when changing the language
Fix
Fixed an error that occurred when attempting to create a new layout at the maximum number of layouts
Fix
Fixed an error where a freeze occurred when attempting to change the creation mode of linear smart objects
New
Messages have been added when selecting unsupported hatches
Fix
Fixed an error that could occur with certain segment sizes in waterproofing
Fix
Fixed a translation error where only the "Arc" option was displayed when creating linear SMART objects
Fix
Fixed an error where administrator rights might be required during opening
Fix
Fixed an error where, after adding parameters to the current family, the family was saved and closed
Improved
Rollback of intermediate changes in case an error occurs during numbering
New
Added the ability to number drawing formats in the volume and in the title block
New
Added the ability to insert the current sheet name into the title block
Fix
Fixed an error where previews for the side and top additional elements of the drawing format were not displayed
New
Added the "PDF creation timeout" option to the settings
New
Family selection context: added the "Current Family" option
Improved
Family parameter editor: parameter formula value updated when a family is removed from the list
Improved
Project parameter creation: changed availability of the "Values can vary by group" property when changing the "Instance/Type" property
Fix
Fixed an error where an extra action was removed from the changelog when pressing "Cancel" in the family editor
Fix
Fixed an error where backup copies of families were not deleted in some cases
Fix
Family editor: fixed an error where parameter usage in element reference parameters was not detected
Improved
Added adjustment of the direction of created walls to match the direction of the original wall (only for straight walls)
Improved
Added ignoring of warnings that may appear when restoring inserts
Fix
Fixed an error where the plugin window could be opened multiple times
New
Added options "Top face only", "Bottom face only", "Top and bottom faces" for Elevations in the "Floors" category
New
Added the ability to specify two Elevation types and an option defining the minimum allowable distance between Elevations
New
Added the ability to choose different Elevation types for the top and bottom faces in the "Floors" category
New
Added the ability to create tags without a leader
New
Added the ability to merge dimensions with the same spacing for the "Structural Rebar" category
New
Added the ability to use "Multi-Rebar Annotations"
New
Added the ability to delete previously created annotations
New
Added handling of pipes
New
Added handling of cable trays and ducts
New
Added handling of the "Furniture" and "Generic Models" categories
New
Organization settings have been redesigned. A vulnerability causing erroneous overwriting of the settings file has been fixed
Improved
The waiting time for pdf files has been increased to 3 minutes
Improved
The waiting time for pdf files has been increased to 2 minutes
Fix
Fixed geometry retrieval for the "Generic Models" category
New
Replaced icons in the context menu
New
Redesign of the "Components" and "Changelog" windows completed
Improved
Optimized context menu performance when update checking is running
Fix
Fixed an error where the presence of an installed version of Renga working libraries was not detected in the change story
Fix
Correct display in dark themes
Improved
License check removed when the "Recent" and "Favorites" options are disabled
Improved
The waiting time for pdf files has been increased from 5 seconds to 1 minute
New
Added the ability to write orientation into walls
Improved
Interrupting export to pdf or printing to pdf if the file does not appear within 5 seconds
New
Object filter: display of the system name of the object type if localization is missing
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
New
Added the ability to select multiple walls
New
Added creation of column elevations
New
Added information about selected rooms
New
Merging of boundary elements
New
Fixed an error in room processing
New
Added the ability to specify the type for an elevation or section
Fix
Fixed an error where plugins for Renga were loaded incorrectly when there was no internet access
Improved
Using an auxiliary application to manage the connection with Renga
New
Added the ability to manage the ModPlus connection with supported products
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
New
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Fixed an error that occurred in some cases when launching settings in Revit 2019
Fix
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Service update due to replacement of auxiliary library to prevent conflicts with other plugins
Improved
Added handling of solid elements when numbering in the view
Improved
Added the "Walls" category to the list of categories available for cutting
Fix
Fixed an error occurring in certain cases when splitting cable trays
New
Added handling of preselection in the "Align Vertical" command
New
Added cycling in the "Align Vertical" command
Fix
Fixed a localization error
New
Added consideration of the current design option when collecting rooms
New
The main search functionality has been replaced with the object filter
New
Configurations added
New
Added support for Organization Settings
New
Added support for Renga version 8.9
Improved
Added the ability to close the window by pressing the Esc key (configured by general settings)
Improved
Removed the plugin window from closing when switching documents
Improved
Added consideration of pinned views
Improved
Removed the ability to close the window when pressing the Esc key
New
Added new embedded components used in plugins
Fix
Correct handling of annotations when working with multiple views
Fix
Fixed a bug where large text notes were processed incorrectly in some cases
Fix
Fixed a bug where inserts were not restored in some cases
Improved
Added a tooltip for view names in the left part of the window
Improved
Correct processing of dimensions in a 3D view created on another work plane
Improved
Correct processing of dimensions in a 3D view created on another work plane
Improved
Deleting zero segments: correct processing of dimensions in a 3D view created on another work plane
Fix
Fixed an error that occurred when editing posts
New
Added the ability to replace layers for objects on all layouts
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Fixed an error that occurred when using the Chinese localization
Fix
Some localization errors have been fixed
Improved
Added the ability to use a negative value as the starting value of numbering
Fix
Fixed an error where the cover of the bottom mesh was, in some cases, taken as equal to the cover of the top mesh
New
Added search by fill pattern name
Improved
Correct determination of the general version in case an outdated file ModPlus_Renga.dll remains in the ModPlus files
Improved
Correct determination of the general version in case an outdated file ModPlus_Renga.dll remains in the ModPlus files
New
Added background coloring when creating a filter
New
Added a brightness slider to the condition by parameter values
New
Added the option "Replace filters when names match"
New
Added the ability to set a filter name in the condition by parameter value
New
Added an option to get parameter values from elements of linked files
New
Added a context menu to fill pattern and line type to apply settings to all positions
New
Added the ability to process multiple selected views
Improved
Hiding templates/views without filters in the left list
Fix
Fixed some UI errors
New
Added the ability to select multiple layouts for replacing similar blocks
Improved
Removed built-in proxy check
Improved
Added new categories of elements available for cutting
Fix
Fixed design in dark themes
Fix
Fixed an error where some angular dimensions could be incorrectly split
New
The principle of connecting to the license server has been changed
New
Added automatic disconnection from the license server after a long period of inactivity
New
The principle of connecting to the license server has been changed
New
Added automatic disconnection from the license server after a long period of inactivity
New
The principle of connecting to the license server has been changed
New
Added automatic disconnection from the license server after a long period of inactivity
Improved
Changes have been made to the full version verification algorithm of the plugin
New
Added the ability to duplicate filters
New
The filter selection area has been replaced with dual call buttons
New
Added selection options as a dropdown list: Select, Select from selected, Add to current selection, Exclude from current selection
Improved
Changes have been made to the full version verification algorithm of the plugin
Improved
Considering the separator from dimension settings when retrieving the value from a dimension
New
Added new ways to select text objects
New
Added the ability to choose which position will be used for sorting/filtering block attributes: the attribute position or the block position
New
Added new features for table numbering
New
Added the ability to search for elements within filters by layer/color/layouts/block attributes
New
Added buttons for quick selection, deselection, and selection inversion in filters by layer/color/layouts/block attributes
New
Added saving of selected filters by layer/color/layouts/block attributes within one session in one document
New
Added preview when sorting by position on the curve
Fix
Fixed an error where in some cases the workset selection window appeared after closing the plugin window
Fix
Fixed an error where coloring did not work (Working libraries must be version 34.0.0 or higher)
Fix
Fixed an error that could cause the plugin to incorrectly handle multiline text and multileaders
Fix
Fixed an error where fractional zeros in negative numbers were processed incorrectly
Fix
Fixed an error where leading zeros in fractional numbers were processed incorrectly
Fix
Fixed an error where the "Select All" and "Deselect All" buttons in the family selection dialog processed hidden families
Fix
Fixed an error where presets created in Revit in another language were not loaded (only for presets created after the update)
Improved
Added rounding options with 4 and 5 decimal places
Fix
Fixed an error where the original room area was retrieved inaccurately
Fix
Fixed an error where floor openings were included in processing
New
Retrieving the original room area considering Revit’s internal rounding algorithms
Improved
Added log deletion by timer with a 4-hour interval in the autosave service
Fix
Fixed an error where selecting room bounding elements could cause a fatal error in some Revit versions
Improved
Rounding down at half step when rounding areas
Fix
Fixed an error where in some cases the number of leading zeros was determined incorrectly
Fix
Fixed text duplication when replacing the content of text annotations
Fix
Fixed an error that occurred when using certain text styles
Fix
Fixed an error where colors were saved incorrectly in element extended data
Improved
Improved handling of walls created by face
Fix
Fixed an error where it was impossible to create multiple copies of a single sheet, placed in a collection, in Revit 2025 and later
New
Added the "Align by elevation" command
New
Added cycling in the "Align" command
New
Added a list with recent values in the "Set Distance" command
Fix
Fixed a hang when printing multiple sheets with the BullZip printer
Improved
On the "Views" tab, a note has been added if a dependent view is placed on a sheet
Improved
Added instance parameters that can store references to other elements
New
Added restoration of the original values of modified printer properties when closing the plugin
New
Removed the "Model Comparison" tab
New
Added the ability to collapse/expand window content
New
Added presets
New
Added the ability to delete selected types
New
Added the ability to display only unused types
New
Added the ability to copy values
Improved
Added sorting by number of elements
Fix
Ignoring errors when attempting to close a view through the context menu of the active tab
New
Added handling of the "Number" parameter for rooms located in a group
Fix
Fixed an error in processing search by selected elements in the schedule filter
New
Added the ability to use wildcards for searching and replacing parts of text
New
Added multiple search
New
Added search and replace in filter names
New
Added replacement of system names
New
Added replacement of the system name
New
Search and replace in schedule filters
New
Added support for Renga version 5.1
Improved
Displaying the most suitable plugins for the current version of Renga
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions 7.0 and 8.0
New
Added support for Renga versions
New
Added support for Renga versions
New
Added support for Renga versions
New
Added multi-selection with Shift and Ctrl
New
Added support for Renga versions
New
Added support for Renga versions
New
Added the ability to clear lists for selected and hidden elements
New
Added "Favorites" tab
New
Added support for Renga versions
New
Added multi-selection with Shift and Ctrl on the "By Sections" tab
New
Added support for Renga versions
New
Added support for Renga versions
New
Added support for Renga versions
Fix
Fixed incorrect floor extension into door openings in some cases
Fix
Fixed incorrect floor extension into door openings
New
Added multiple selection in the family tree view when loading families from the Project Browser
New
Added multiple selection in the tree view of elements
New
Added multiple selection in the tree view of elements
New
Added multiple selection in the tree view of elements
New
Added multiple selection in the tree view of elements
Fix
Fixed an error occurring when copying grid cropping if the grid does not intersect the level
New
Added multiple selection in the tree view of elements
New
Added multiple selection in the tree view of elements
New
Added multiple selection in the tree view of elements
Fix
Fixed an error where the screen scale was determined incorrectly
Improved
Removed duplication of overlap length for top column joints
Improved
Processing only parent electrical systems in the InMEPSystem strategy
Improved
Do not send the error caused by a long file path to the error collection service
New
Added the "Disconnect connectors" command
Fix
Fixed some errors
Improved
Added the ability to collapse/expand the window contents
Improved
Added the ability to open the user folder
Improved
Added the property "path" to the element in the database
Improved
Added the ability to recreate the preview of a downloaded element in the database
Improved
Built-in commands: added an additional check of belonging to the host when searching for reinforcement in the host
Fix
Fixed floor extension into French windows
Fix
Fixed incorrect height of finish walls when using a base of multiple walls with different heights
Improved
Added handling of rotation of the source and target views
New
Added validation functionality
New
Added "Step-by-step calculation" of formulas
New
Added export of parametrization results to Excel
New
Added the ability to specify linked files in which elements will be searched
New
Added search and multi-selection in the view selection window
Improved
Added automatic selection of views highlighted in the project browser to the view selection window
Improved
Added case sensitivity when retrieving a parameter from an element
Improved
Added grouping of functions by type and sorting of functions within a group in the instruction table of contents
Improved
Error generation if the label %NO_PARAMETER% is present in an arithmetic expression
Fix
Fixed an error where arithmetic expressions were incorrectly recognized if the system decimal separator was set to a comma
Fix
Fixed an error where the results window always recorded a positive result for SUM and JOIN functions, even if the function processing failed
Fix
Fixed an error where multiple SUM and JOIN functions in one formula were processed in reverse order
Fix
Fixed bug that could occur when starting the plugin in a document with frozen layers
Fix
Fixed bug where filtering of dynamic blocks was not possible
New
Added filter by layouts
New
Added filter by block attributes
New
Added sorting method by layouts
New
Added ability to sort in reverse order
Improved
Added distance preview for filter by distance from curve
Fix
Fixed bug where initial value could not accept fractional value with comma
New
Added handling of the "Leader/Boundary Offset" property for text and annotations
New
Added handling of the "Background" property for text, annotations, and dimensions
New
Added the ability to change alignment for schedules, text, and annotations
Fix
Fixed an error where a message appeared stating that the added shared parameters were already added to the list
Improved
Do not show news if the update check process is running
New
Added the option "Remove Unicode control characters from the filename"
New
Added the ability to open selected views from the favorites list
Fix
Fixed a bug where the Sheet Number of the specification might not be specified
Improved
Added height limitation in the subcategory selection window
Fix
Fixed an error that occurred in some cases when launching settings in Revit 2019
Improved
Creating a solid body 1 mm thick by extruding upwards from ceilings with no thickness to check solid body intersection and contact
Improved
The plugin window has been made resizable
Fix
Fixed a bug where the instruction on the "AP_Rounded area" tab was not restored
New
Added the ability to use room filter by parameters on the "Apartment Collection" and "Calculate Apartments" tabs
New
An additional "AP_Rounded area" tab has been added to the "Calculate Apartments" tab, allowing calculation of only the rounded area for specified rooms
New
Added tabs "Open Views" and "Views in Project"
New
Added view search by name
New
Added ability to copy grid crop regions
Fix
Fixed incorrect handling of dependent views
Fix
Fixed some bugs
Improved
In the parameter import window from the specified family, search by parameter name has been added
Improved
The algorithm for updating formulas of dependent parameters has been optimized
Fix
Fixed an error where the option to calculate the area of blocked apartments was not taken into account when using typical floors was enabled
Fix
Changed the "Offset from Level" parameter instead of the "Offset from Primary Model" parameter
Fix
Fixed an issue in the UI where some options were placed in the same location
Fix
Fixed an issue where the content might be displayed incorrectly in some text objects
Improved
Added the ability to escape parentheses in the room name when defining conditions for typification and classification
Improved
Autosave service: minimum autosave interval value reduced to 3 minutes
New
Added filters to nearly all columns
New
Create parameters in families: added "Report Parameter" property
New
Edit parameters in families: added "Set Formula" and "Clear Formula" actions
Improved
Family backup creation via file copy instead of invoking "Save" command
Improved
Removed automatic reading of current family when launching plugin in family. Added restriction on switching between family-related sections
Improved
Fixed several issues
Fix
Fixed an issue with incorrect displacement of 3D shape when moving the survey point
Fix
Fixed incorrect processing of door openings when creating floors in some cases
Fix
Fixed an error that occurred when a compound text contained a line break
Improved
Performance improvement during prolonged command usage
Fix
Fixed an error where the intersection of elements with solids in a linked file might not be detected
Fix
Fixed an error where the position of longitudinal reinforcement failed to load
Fix
Fixed an error where the position of longitudinal reinforcement failed to load
Fix
Fixed an error where menu items were available when the parameter list was not populated
Fix
Fixed an error that caused slow processing of sheets where cell borders were set to the full width or height of the sheet
Fix
Fixed an error where formatted text was not processed
Fix
Fixed an error when copying elements that use a host
Improved
The list of available rebar couplers has been expanded in the "Couplers" window
New
"Delete all unused view templates" option added to main cleanup
Fix
Family parameter editing: fixed an error that prevented formula modification for built-in parameters
New
Element filter: added conditional parameter AreaScheme
Improved
Tab coloring: standard color schemes extended to 10 colors
New
Added GOST 35087
New
Added GOST 31416
Improved
Changed the release year for GOST 26633
Improved
GOST 57837 marked as "Not valid"
Fix
Fixed an error that occurred when starting the plugin when there are no open documents in Revit
New
Added "Check all" and "Uncheck all" buttons to the family selection dialog from project browser
Improved
Added "All Parameter Definitions" group to the parameter selection dialog from shared parameter file
Improved
Family Editor: improved the parameter name search algorithm in other parameters' formulas
New
Added a new command "Import to Schedule"
New
Added the ability to insert a table into a legend
New
Added the ability to create pseudo-schedules
New
Added the ability to specify a cell range for import
New
Added the ability to consider view scale when importing into a drafting view or legend
New
Added image processing
New
Added the ability to open the folder with the source file
New
Added the ability to batch update tables
New
Added xlsm file processing
New
Added support for composite text (superscript, subscript, bold, italic, underlined) when importing into a drafting view or legend
Improved
Added category "Multistory Stairs" to element category filters
Fix
Fixed a bug causing sheet preselection to affect all open documents
Fix
Fixed an error that prevented lookup tables from being deleted
Improved
For sheets, the sheet number has been added to the display name
Fix
Accounting for the "parameter has a value" option for numeric parameters when checking the match between the existing value and the specified one
Fix
Fixed an error that occurred when processing rooms that had no name assigned
Improved
Loading the Change story in the current version of the program
Improved
Loading the Change story in the current version of the program
Improved
Service update
New
Added access check to ModPlus folder
Improved
Redesign of the window with information about new plugins
Improved
Optimized loading of the Components window
New
Added search and replace in the "Title" section of Schedules
Improved
Edit parameters in a project: added the ability to copy parameter categories to the clipboard
Fix
Do not display settings if full version is not available
Improved
Family Editor: Show dependencies for built-in parameters in Remove Unused Parameters dialog
Improved
Changed the position of buttons in some windows
Fix
Fixed a bug that occurred when checking for intersection with some blocks
Fix
Fixed a bug that occurred when checking for intersection with some blocks
Improved
The maximum permissible value of the horizontal reinforcement step has been increased from 400 mm to 1000 mm
Improved
Added the ability to export the configuration specified by the organization settings
Fix
Roll back changes made in the previous update
Improved
Removed the ability to show all plugins in the right list on the "Adaptation" tab
Improved
Replaced Export/Import icons on the "Adaptation" tab
Improved
The option "Close windows by pressing the Esc key" has been added to the settings
Fix
Split Curve: Fixed a bug where it was impossible to split some curves, regardless of their length
Fix
Fixed incorrect logic for copying grouped objects
Fix
Fixed a bug where copying along some curves was not performed
Fix
Weld designation: fixed a bug where some arrow type values could not be selected
Fix
Weld designation: fixed a bug where some property values could not be deleted
Fix
Fixed an error sometimes occurring when copying to clipboard
New
Edit parameters in families: added possibility to group parameters with different formulas
Improved
Correct tab coloring in case of mosaic display of tabs
Improved
Elements filter: optimization of element checking by different filters on one parameter
Improved
Dip mark: added option to choose between truncation and rounding of the dip summary value
Improved
Dip mark: added ability to display tail zeros
Fix
Fixed a bug where dimensional text was not offset if the current view was opened in a detached window
New
Added a new smart object "Weld designation"
New
Added a new smart object "Weld Leg"
New
Added a new smart object "Hole Filling"
Improved
Dip mark: added ability to override text
Improved
Search: only object types present in the current drawing are now displayed in the list of smart objects
Improved
"Smart properties" item has been added to the context menu
Fix
Letter Line: fixed a bug where text was incorrectly displayed after mirroring
Improved
Simplified Chinese language instruction added
Improved
Removed auxiliary application mpCleaner.exe
Fix
Fixed a bug where nested families were not processed when processing selected elements
New
Added support for Polyline3d, Polyline2d
Improved
Restricted ability to cut text from fields that display scale
Improved
Added support for Polyline3d, Polyline2d
Improved
Synchronization notification: changed orange color with white design theme
Fix
Fix incorrect definition of room contour in some cases
Improved
Accelerated appearance of built-in commands
Improved
The maximum permissible floor displacement has been increased
Fix
Fixed an error of floor construction in separate rooms
Improved
Added getting sorting point for text notes
Improved
Improved interaction with other tab coloring service plugins
Improved
The principle of limiting the trial version has been changed
Improved
Improved algorithm for beam cross-section determination
New
The algorithm for calculating cross reinforcement points has been improved, taking into account that the thickening sections should be the same
Fix
Fixed an error occurring in the autosave service when switching between documents
Improved
Added getting sorting point for Parts
New
Added "Close windows by pressing the Esc key" option to settings
New
Added "Close windows by pressing the Esc key" option to settings
Fix
Fixed a bug where in some cases the color scheme of tabs coloring did not change
New
Added ability to set multiple rows for view tabs
New
Added synchronization notification service
New
Elements filter: added conditional parameters "Curtain", "Nested", "Parent"
New
Added ability to disable specific built-in commands
New
Added 8 new built-in commands
New
Added "Close windows by pressing the Esc key" option to settings
New
Favorite commands: adding buttons that are menu items in the source menu
New
Restoration of tray and conduit connections during tray splitting
Improved
Optimized algorithm for obtaining solids from complex families consisting of a large number of pieces
Improved
Optimization of smart object regeneration when executing ROTATE and MIRROR commands
Improved
Increased the maximum number of wall bases to 50
Fix
Fixed a bug that caused the parameters of other finishing elements to not be updated when the "Floor" option was disabled
Improved
When checking cases where doors are made by families in the "Windows" category, added accounting for the Sill Height up to 50 mm
Fix
Fixed a bug that in some cases led to incorrect collection of apartments if several allowed apartment identifiers were specified in the settings
Improved
Ignore zero-volume Floors
Fix
Fixed incorrect offset of 3D shape when moving the survey point in Revit 2022 and earlier versions
Improved
Display the current configuration name in the Rename dialog box
Fix
Fixed a bug where color matching in conditions by parameter did not work after duplicating a configuration
Improved
Edit parameters in families: the "Other" group has been added to the list of groups available for changing
New
Editing parameters in project: added "Change group" action
New
Family editor: change group for selected parameters
Fix
Fixed a bug where Curtain Walls were not processed in some cases
Improved
Minor optimization of the algorithm of pattern rendering during preview
Fix
Fixed a bug where pattern units were incorrectly defined when importing from a pat file
New
Consideration of reinforcement visibility in the view when processing reinforcement in the Host
New
Family editor become a separate command
New
Family editor: redesign of the parameter list
New
Family editor: added various options for replacing one parameter with another.
New
Family editor: added possibility to delete unused parameters
New
Family editor: added ability to change parameter position and move parameters between groups
New
Family selection context: added ability to select families from the Project Browser
New
Batch editors: added presets and preset storage with support for Organization Settings. Export and import is available in each section
New
Batch editors: redesigned the system for adding actions
New
Formula editor: added buttons for inserting parameters and formulas
New
Added check for the existence of a parameter in the current shared parameter file
Improved
Many other improvements and features
Fix
Many bug fixes
Improved
Autosave service: removed project recovery from .os$ file if you press "No" button when prompted to save the file
Fix
Fixed an error in import from Excel that occurs if there is no value in a cell of the "Field" column
Improved
Command "Properties copy": the parameter "Quantity" for the category "Rebars" has been excluded from processing
Improved
Improved command search algorithm
Improved
Small improvements in the algorithm for finding unused shared parameters
New
Added "Split face of cutting element" option to cut settings
Fix
Correct accounting of prefix/suffix of dimension segments
Fix
Fixed a bug where the standard menu was not rebuilt when installing new plugins
New
New command "Split curve at intersection points" has been added
Improved
More detailed error text when copying pdf files from temporary folder to destination folder fails
Fix
Fixed an error in CVIF function processing when the search for the required row was not performed if several conditions checking one cell were specified
Improved
Improved algorithm for positioning stirrups with Revit hooks
New
Added ability to set the position of built-in commands in the panel
Improved
Favorite commands: do not unpack ModPlus "Hide Categories" and "Show Categories" commands
Fix
Elements filter: fixed element filtering bug when using group conditions with check for empty value
Improved
Removed support for revision clouds in AutoCAD versions lower than 2021
Fix
Fixed an error occurring when processing the ROUND function if the second argument is written with a space
Improved
Added recognition of system parameter names (BuiltInParameter) in file masks
New
Added sorting of worksets in alphabetical order within a group
New
Workset processing: Added "Elements" column showing the number of elements in the workset
New
Workingset processing: Added ability to delete selected worksets
Improved
The category "Doors" has been added to the list of categories to cut out
Improved
Corrections were made to the rounding algorithm
Fix
Fixed a bug where incorrect rooms were not filled in the "Initial Check" tab
Improved
Improved algorithm for extracting a number from a string
Improved
Alphabetical order of the block list
Improved
Exclude anonymous blocks from the block list
Fix
Fixed an issue where some versions of AutoCAD would not detect revision clouds
Improved
Correct work with OSNAP
Improved
Added possibility to set a fractional value in the " Offset of the outermost rod" property
Fix
Fixed an error in the "Waterproofing" object related to the indentation from the end of the segment.
Fix
Fixed incorrect rendering of closed linear objects
Improved
Changed rounding algorithm to match Revit rounding algorithm
Improved
Taking prefix and suffix into account when calculating the offset distance
Improved
Deletion of autosave service logs that are older than one week
Fix
Fixed color design in the "Workset processing" window when the design theme is dark
Improved
Removing on load from configurations categories added in a later Revit version and missing in the current Revit version
Fix
Fixed some errors occurring when rendering linear objects
Improved
Search by category and filter by parameters when the context of element selection changes, if the corresponding search and filter values are entered
Fix
Fixed "Cannot access a disposed object" error occurring when rendering a table
Fix
Fixed UI in the settings dialog
New
Added the ability to change the segment type of linear objects to arc segments
New
Added a new smart object (PRO) "Insulation"
New
The mpCleaner helper application is integrated into the auto-update module
New
Added "Export Current" function
Fix
Fixed incorrect merging of cells when exporting with header and preserving formatting
New
Checking the validity of rooms before processing
New
Removal of previously created joints from the foundation slab only when the joints intersect with the columns to be processed
New
Added processing of angular dimensions
Improved
Ignoring the exceptions that arise in some cases when analyzing the rebar shapes
Improved
Ignoring the exceptions that arise in some cases when analyzing the rebar shapes
Improved
Ignoring the exceptions that arise in some cases when analyzing the rebar shapes
Improved
Ignoring the exceptions that arise in some cases when analyzing the rebar shapes
Improved
Redrawing smart object graphics when PLOT command is started
New
Added support for Revit 2026
New
Added support for Revit 2026
Improved
Improved algorithm for positioning stirrups with Revit hooks
Improved
Do not consider an opening as belonging to the room if the opening is perpendicular to the wall enclosing the room
Improved
Favorite commands: improved algorithm for receiving commands
New
Added support for AutoCAD 2026
New
Added support for AutoCAD 2026
Improved
Adding prefixes to sheet names when exporting current sources to Excel
New
Added ability to calculate areas of locked apartments (set in settings)
Improved
Do not synchronize views if one of the views is a sheet
Improved
Added the ability to remove insulation by setting an empty value
Fix
Fixed a bug where insulation was not being set for elements in the "Duct Fittings" category
Improved
Added alphabetical sorting of the template list and sheet list
New
Removed restriction on running the plugin in families
New
UI layout redesigned
New
The result is supplemented with the following information: whether the parameter is present in a filter; whether the parameter is present in a sort; whether the parameter consists of a combined field
Fix
Fixed bug when searching in Revit 2024 and higher
Fix
Fixed a bug that allowed a window to be opened multiple times
New
Expanded capabilities of the "Copy in direction" command: it is now possible to disable the "Quantity" or "Distance" option separately
Fix
Fixed a bug occurring in some cases when selecting elements with insulation
Fix
Fixed incorrect reconnection of existing inserts when copying elements to MEP curves with inserts
Fix
Fixed a fatal error occurring when clicking the export folder selection button repeatedly
Fix
Fixed a bug where sorting on some columns of some tables did not work
Fix
Fixed a bug where insulation was not set for elements of the "Pipe Fittings" category
Improved
Updated instruction in Spanish
Improved
Elements filter: one of the two parameters "Design Option" has been excluded from the processing of element parameters
Improved
Fixed the algorithm for collecting room parameters during plugin initialization, which led to model regeneration
Fix
Fixed a Shared parameter collection error occurring when running the plugin in a family
New
Added search in all sections
New
Added "Project parameter" column in the "Shared parameters" section
New
Added "Unplaced areas" section
Improved
Added the ability to rename a configuration in the "Basic cleaning" section
New
Bypass widening in the longitudinal direction of the bending element at angles from 80 to 110 degrees
New
Added a new command "Fast moving of vertices"
Improved
Removed the ability to set the color of the auxiliary line
Fix
Fixed an error of deleting matching vertices in a closed polyline, where the first and the last vertex coincide
Improved
Rounding of coordinates of Title Blocks position when sorting Title Blocks by coordinates
New
Added bold highlighting of an unremovable workset in the "Workset processing" command
Improved
The Hide/Show functions in the "Workset processing" command apply to the visibility of the worksets themselves in the view, not to the visibility of individual elements included in the worksets
Improved
Filters and workset settings are divided into two parts
Fix
Fixed localization error in configuration creation/editing window
Fix
Elements filter: fixed an issue where only categories to which parameters can be bound were displayed in the category list
Fix
Elements filter: in the Revi 2019 version, the OST_Conduit category has been added to the list of categories
New
Optimization of element relations search when working with InSolid, InRoom, InSpace, SolidTouch strategies
New
Added logging of the autosave service operation to a file
Improved
Correct processing of elements in the category "Rebar" when checking conditional parameters BottomZ and TopZ
Fix
Fixed a bug where the layer selection drop-down list did not show underscores in layer names
New
Added ability to disable image discoloration when printing with color exclusion
Improved
Consideration of the project base point when checking the conditional parameters BottomZ and TopZ
Fix
Fixed a bug where the format list was not updated when changing the PDF output option
New
Added export/import of strategies to/from XML
Improved
Updated instruction in German
Improved
Removed removal of unprintable characters from string parameter values
Fix
Fixed a bug where a copy of an object was always created regardless of the selected option in the settings window
Improved
Using only existing "Housing-Section" pairs in the dialog box for selecting the initial room for numbering
Fix
Values with an underscore in the name are displayed correctly in property palette drop-down lists
New
Changed the order of name formation - adding an index before the prefix (or after the suffix)
New
Changed the order of name formation - adding an index before the prefix (or after the suffix)
New
Two-step rounding of areas
New
Tree view of categories in the category selection dialog box
New
Fixed a bug where the text on the buttons in the subsection selection window was not displayed
Improved
Export/Print pdf to temporary folder, then transfer to destination folder
Improved
Offset segment text to the side of the outermost segment if the text of the outermost segment has been offset to the outside of the segment
Improved
Pre-resetting the text position when using the "Offset Selected" command
New
Added ability to select parameters from a drop-down list
Fix
Fixed a bug where any process with the word "revit" in its name was considered to be a blocking process
New
Optimize CPU consumption
Fix
Fixed a bug where Key Schedule elements might not be processed when numbering a numeric parameter
New
Added possibility to specify the order of subfolders
Improved
Improved file generation algorithm when exporting/printing to PDF
Fix
Fixed a bug where printer settings were not displayed in Revit 2019-2021
Fix
Fixed a bug where the plugin might not run in Revit 2022 and above
Fix
Fixed a bug occurring in some cases in the ModPlus_Revit.App.SetTabsVisibilityAvailability command when opening a document
Fix
Correct behavior when checking checkboxes
New
Correct mirroring of objects with text
New
Added ability to output sheets to PDF using print in Revit 2022 and higher
Improved
The button to open the dialog box for editing custom print formats has been moved to Settings
Fix
Fixed a bug where the color edit button became inactive when the "B/w with exclusion" print option was selected
New
Added "Grayscale with exclusion" print option
Improved
Added check for the presence of the Title Block on the sheet when using the "Print Current" command
Fix
Fixed a bug that caused a hang if a generated file name had a space at the end of it
New
Export instead of print in Revit 2022 and higher
New
Removed format detection algorithms
New
Added option to export to document location folder
New
Added option with behavior after export to settings
New
Added display of the number of selected sheets in the header of each document if more than one document is open
New
Added option to delete documents from the list of open documents
New
Added option to select sheets by filter
New
Added the ability to set the file name mask by organization settings
New
Added the ability to insert a sheet parameter into the merged file name mask
Improved
Improved algorithms for exporting sheets with several Title Blocks
Improved
Improved algorithm for printing in "black-and-white with exception" mode
Improved
Added output of the document location directory in the plugin window
Improved
Added bold highlighting of the active sheet
Improved
When reading documents, if there are several of them, not the first one in the list is selected by default, but the one that is active at the moment of plugin launching
Fix
Fixed a bug where rod spacing was incorrectly calculated if the fill distance was not divided by the number of gaps without a remainder
Fix
Fixed a bug where rod spacing was incorrectly calculated if the fill distance was not divided by the number of gaps without a remainder
Improved
Made minor improvements to the text width measurement method
New
Added the ability to apply graphics settings on the current view to all room volume views
Fix
Skipping specialized elements when deleting elements in the workset
Improved
Added highlighting of paired curly braces
Fix
Fixed a bug where classification results could be incorrectly recorded
New
Added the ability to set values for key parameters of Rebars
New
Added the ability to set values for key parameters of Rebars
New
Added possibility to set parameters of Rebars in Area Reinforcement
New
Added the ability to set values for key parameters of Rebars
New
Added the ability to set values for key parameters of Rebars
New
Added Parts strategy
New
Added NOT, DISTINCT, CVIF functions
New
Added ability to remove duplicates and perform sorting in JOIN function
Fix
Fixed a bug where a negative number was incorrectly extracted from a string if the string started with text
Fix
Fixed a bug where a message about deleting a previously created reinforcement was written in the status bar if reinforcement deletion was disabled
Fix
Fixed a bug where a message about deleting a previously created reinforcement was written in the status bar if reinforcement deletion was disabled
Fix
Fixed a bug where a message about deleting a previously created reinforcement was written in the status bar if reinforcement deletion was disabled
Improved
Preventing a plugin from running in a family
Fix
Fixed some errors occurring when working with the list of layers for blocks
Improved
Changed the position of built-in commands on the ribbon
New
Added the ability to change the filter order of views/templates in the list on the right side
New
Added the ability to search for multiple values by specifying with semicolons
Improved
If the plugin is run on a sheet, the "Active View" button will be replaced by the "Active Sheet" button
Improved
Added a special icon if the filter is a selection filter
Improved
Export/Import icons replaced
Improved
Export/Import icons replaced
Improved
Export/Import icons replaced
Improved
Export/Import icons replaced
Improved
Some icons have been replaced
Improved
Export/Import icons replaced
Fix
Changing the language on startup when the language is Spanish
Fix
Fixed the reason why the error "This Rebar is matched with multiple shapes" appeared in some projects
Fix
Fixed the reason why the error "This Rebar is matched with multiple shapes" appeared in some projects
Fix
Fixed the reason why the error "This Rebar is matched with multiple shapes" appeared in some projects
Fix
Fixed the reason why the error "This Rebar is matched with multiple shapes" appeared in some projects
Improved
When adding a new row to the room matrix, the area factor defaults to 1
New
Added configurations with support for Organization settings
New
Removed the tab "Views of apartments"
New
Added "Classification" tab
New
The "Parameters" tab is divided into "Mandatory Parameters" and "Additional Parameters"
New
Added the ability to mark rooms as "Mezzanine"
New
Added built-in service that changes apartment ID when copying rooms
New
Added selection of apartments on the "Collection", "Calculation", "Editor", "Classification" tabs when selecting the room included in the apartment in the model
New
Added a built-in "Select Apartment" command that enables to select the entire apartment, which includes the selected room
New
New locking principle - locked apartments are ignored in the calculation process
New
Added possibility to set conditions for area and "Mezzanine" property in "Contains rooms" and "Not containing rooms" conditions (Apartment Types, Classification)
New
Added possibility to use the total area of the apartment without a coefficient when determining the type of apartment
New
Apartment editor: added grouping by functional purpose
New
Apartment editor: added display of rooms included in the apartment
New
Apartment editor: added possibility to remove a room from an apartment with recalculation of apartment characteristics
New
Apartment editor: added possibility to recalculate selected apartments
New
Apartment editor: added possibility to remove selected apartments (i.e. to reset all parameters related to the Apartment Typology)
New
Apartment editor: added possibility to mark (or unmark) selected rooms as "Mezzanine"
Improved
Consideration of separators when calculating room area with finish thickness. Revit 2020 and higher only
Fix
Fixed a bug where the number of apartment levels was reset during calculation
Fix
Fixed formula validation error occurring in Revit 2025
Fix
Fixed a bug where a closed panel could reopen when creating or opening a new document
Fix
Fixed a bug where a closed panel could reopen when creating or opening a new document
Fix
Fixed an error where the specified upper level was taken instead of the specified lower level
Improved
Increased accuracy when calculating angles
Improved
Copying "Phase" parameter values from the original element to the created ones
Fix
Fixed a bug that could cause a hang or crash when changing the configuration
Fix
Fixed some localization bugs
Improved
Elements filter: added "Stairs" category to the list of element-host categories
Fix
Fixed folder opening error in Revit 2025
Fix
Fixed folder opening error in Revit 2025
New
Added ability to ignore the overlying floor when creating straight joints from the top columns
New
Added possibility to specify different spacing on top and bottom cross reinforcement thickening sections
Improved
The minimum value of joint length for upper columns has been reduced from 200 to 0 mm
Fix
Fixed some localization errors
Improved
The "Walls" category have been added to the list of available categories of the Curtain Wall Components strategy
Improved
Ignoring missing solid error when processing foundation slabs from linked files
Improved
The "Walls" category has been removed from the list of categories to cut out
Improved
The category “Walls” has been added to the list of categories to cut out
New
Added copying of project parameter values bound to family types
Improved
Crested leader: the maximum allowed value for text indentation has been increased
Improved
Removed checking of empty values of arguments in conditions
Fix
Fixed an error occurring when checking conditions if one argument is missing
Fix
Fixed a bug where arithmetic expressions were incorrectly calculated if a parameter had a negative value
Improved
Crested leader: added "Text is always horizontal" option
Improved
Display nested items when selecting a group in the tree, regardless of search results
Fix
Fixed an error that incorrectly counted arithmetic expressions when specifying a comma as an integer and fractional part separator
New
Removed intermediate saving of installation files archives to disk
New
Removed intermediate saving of installation files archives to disk
Fix
Missing images have been added
Improved
Improved algorithm for determining arithmetic expressions in curly brackets
Improved
Improved algorithm for determining condition arguments
Fix
Chain leader: correct position of the mirror grip at scales other than 1:1
Fix
Node mark, Secant node mark: correct sheet number indentation when using shx font.
Improved
Edit parameters in families: removed restriction on editing formulas of built-in parameters
Fix
Fixed some errors occurring during validation and pre-calculation of formulas
New
Added the length of all objects to the export of results to a txt file
New
Added the area of all objects to the export of results to a txt file
Improved
Correct processing of block attributes
New
Added possibility to specify the block insertion point as a base point
New
Added possibility to specify the block insertion point as a base point
New
Added possibility to specify the block insertion point as a base point
Improved
The "Windows" and "Doors" categories have been added to the list of available categories of the Curtain Wall Components strategy
New
Replaced the search and replace algorithm in Text Notes
New
Raster preview images have been replaced by vector ones
New
The "Fields" window is made non-modal (does not block the AutoCAD window)
New
Raster preview images have been replaced by vector ones
New
Added two new tables according to GOST 2.701
Improved
Redesign of the localization language selection drop-down list
Improved
Redesign of the localization language selection drop-down list
Improved
Redesign of the localization language selection drop-down list
Improved
Redesign of the localization language selection drop-down list
Fix
Correct change of the license server settings design theme when changing the Configurator design theme
New
Added processing of families in the "Casework" category
New
The mechanism for selecting a number from the text, taking into account the separator, is built into the settings window
New
The algorithm for determining and processing numbers in a string has been rewritten
New
Added tiled display mode
Fix
Fixed an error occurring when selecting dimensions with an equality formula
Fix
Added catching of errors that may occur when running the plugin
Improved
Elements filter: additional check of the displayed value of numerical parameters
New
Added “Fetch data” button in the Personal account
New
Elements filter: added possibility to escape comma
New
Added “Fetch data” button in the Personal account
New
Added “Fetch data” button in the Personal account
Improved
The "Separator" option has been removed from the plugin window
New
Added the "Add to current selection" option
Improved
Changing the design theme in the palette when changing the design theme in the settings window
Fix
Correct processing of attributes with multi-line text
Fix
Correct color handling when saving and loading layers
Fix
Correct color handling when saving and loading layer list
Fix
Interrupting the export process when closing a window
New
Added grouping of sheets that are in assemblies
Improved
Rollback of intermediate changes in case of an unexpected error in move renumbering
Fix
Crested leader: fixed a bug where minimum distances were not correctly taken into account when specifying the scale
Fix
Fixed a bug where fields were not imported when importing from Excel
New
PRO version
New
Added new smart object (PRO) “Pile Mark”
New
Added new smart object “Crested leader”
New
Added new smart object “Dip mark”
New
Added “Find and replace” command (instead of “Search by value” command)
Improved
Added copying of line color and thickness when creating a analogy
Improved
Node designation: added double-click editor
Fix
Level mark on plan: fixed a bug where it was not possible to set a mark value greater than 5 through the properties palette
Fix
Letter line: fixed text spacing at scale
Improved
Updating the German language instruction
Improved
Restoration of breaks in Crop Box
Improved
Added the category "Toposolid" (Revit 2023 and above) to the list of categories on the Cut and Join tabs
Improved
Some icons have been replaced
Improved
Correct processing of numbers preceded by preceding zeros
New
Added configurations
New
Added ability to specify a symbol to separate numbering or not to separate numbering with a symbol
New
Added ability to reset the temporary view of duplicated Views and Legends
New
Added search and replace in View and Legend parameters
New
Added search and replace in Schedule headers
New
Added search and replace in Schedule filters
New
Added configurations
New
Added grouping of sheets that are in assemblies
New
Added ability to specify a symbol to separate numbering or not to separate numbering with a symbol
New
Added ability to reset the temporary view of duplicated Views and Legends
New
Added search and replace in Text Notes
New
Added search and replace in Sheet, View, Legend parameters
New
Added search and replace in Schedule headers
Improved
Optimized algorithm for collecting parameters available for processing when running the plugin on a view
New
Export progress is integrated into the main window of the plugin
Improved
Application icon replaced
Improved
Application icon replaced
Fix
Fixed a bug where run buttons were available after deleting all configurations
Improved
Optimized algorithm for update checking for plugins
Fix
Fixed a bug where the duplicate configuration button was available when no configurations were available
Improved
Some icons have been replaced
Improved
Changed order of configuration editing buttons
Improved
Some icons have been replaced
Improved
Changed order of configuration editing buttons
Fix
Fixed a bug where, in some cases, determining the position of an element inside the solid of another element did not work correctly
Improved
Some icons have been replaced
Improved
Changed order of configuration editing buttons
Fix
Fixed a bug that caused sheets to regenerate after closing the plugin
Improved
Some icons have been replaced
Improved
Changed order of configuration editing buttons
Fix
Fixed an error occurring when trying to open a folder in Revit 2025
Improved
Correct processing of walls that are parallel to the current section
Improved
Replacing icons
Improved
Added processing of families in the categories “Windows” and “Doors”
Fix
Ignoring errors that occur in some cases when trying to get the insertion point of an element
Improved
Correct processing of insulation by the InMEPSystem strategy
Improved
Removing start and end spaces from the Layout name
Improved
Removing start and end spaces from the Layout name
Improved
Removing start and end spaces from the Layout name
Fix
Fixed a bug where stirrups were created with incorrect step in some cases
Improved
Removed removal of double quotes from the result of expression calculation
Fix
Fixed a rotation bug on some tees
Fix
Fixed a bug that occurred when creating stirrups if reinforcement creation in intersections was enabled but intersection analysis was not performed
Fix
Fixed a bug where the joints were not bent into the slab if there was a doorway in the above wall
Fix
Fixed a bug where selected apartments were incorrectly merged
Improved
Correct description of the edge bar indentation depending on the type of reinforcement
Improved
Added the ability to move to a new line in the strategy description
Fix
Fixed a typo in the instruction
Improved
Improved behavior of the sheet reading settings dialog
New
New functions added: LSTRINDEX, COUNT
Improved
IMPORTANT: Changed the order of arguments in STRINDEX function
New
Added possibility to specify when changes in the document will be committed
Improved
Connect connectors: Added ability to connect connectors of different shapes
Improved
Correct addition of rows to the table taking into account the number of items in the specification (if the number of items is more than 3)
Improved
Adding thickness to the bottom border of the table
Improved
Adding the specification name to the table header if the specification is saved
Improved
Fixed alignment from "Top Left" to "Center Left" in cells of some tables
Fix
Fixed a bug where parameters in settings were not displayed after loading settings from a file
Fix
Fixed a bug where parameters in settings were not displayed after loading settings from a file
Fix
Fixed a bug where parameters were not set in area reinforcement when "in each direction" option and number of meshes 1 was selected
Fix
Fixed a bug where parameters in settings were not displayed after loading settings from a file
Fix
Fixed a bug where parameters in settings were not displayed after loading settings from a file
New
Added ability to disable grouping of sheets from assemblies
Improved
Redesign of sheet reading settings
Improved
Updating the German language instruction
New
Rewritten formula processing algorithm
New
Added new results window
New
Added possibility to write the result to a conditionally initial element
New
Added new functions: REPLACE, FORMAT, CV
New
Added new strategies: CurtainWallComponents, OneToMany
New
Added strategy filters
New
Added possibility to use Excel file as a data source in a formula
New
Added export and import of configuration
New
Added other features
Improved
Various design changes and improvements
Fix
Various bug fixes
Improved
Correct color handling if the color returns an error via Revit API
Fix
Fixed a bug where the current color scheme was incorrectly detected in some cases
Improved
Elements filter: the "Level" parameter has been removed from the parameter list for columns and structural columns
Improved
Removed border around the color selection element
New
Added ability to specify in the settings what area to use when calculating the area with the factor
Improved
Correct collection of multilevel apartments
Fix
Fixed "The document to be opened does not exist" error
Improved
Do not save settings if the configuration list is empty
Improved
Added check for the existence of signature files before inserting a signature
Improved
Processing of architectural columns
Fix
Fixed an error occurring when splitting a distributed set
Improved
Restricted plugin operation in families
Fix
Fixed a bug that occurs when creating a merged pdf if the export path ends with a backslash
New
Elements filter: added possibility to filter by elevation
New
Added possibility to change the height of "Recent" and "Favourites" rows (without saving)
Improved
Changed the principle of sending plugin usage statistics
New
Added grouping of sheets that are in assemblies
New
Added grouping of sheets that are in assemblies
Fix
Fixed an error occurring when trying to collect parameters from families with cyclic dependency
New
Added the ability to split slanted columns
New
Added option to set the same offset values ​​for top and bottom, allowing to preserve dependencies
Improved
Offsets are applied exclusively at the points where elements are separated.
Improved
Changed logic for assigning top offset: now it works similar to behavior in Revit
Improved
Taking into account the localization of an article on a website when displaying news
Fix
Fixed a bug that occurs when Revit loads if tab sorting has been enabled
Improved
Consideration of selected element types when the “By selected elements” option is enabled
Fix
Fixed an error occurring if the view contains marks of rooms located in a linked file
Improved
Checking and unchecking items in the tree only affects the displayed items
New
Added ability to select blocks with the same attribute values
New
Added the possibility of splitting by floors and beams
New
Added coefficient for values
Improved
Changed value in the HIDEWHENNOVALUE column when exporting parameters to a text file
Improved
Do not interrupt work if pdf compression fails
Fix
Fixed an issue with rounding fractional numbers in AutoCAD 2025
New
Added copy orientation function, when copying along a curve
Improved
Reset element selection before exporting
Improved
Elements filter: added "Electrical equipment" category to the list of element-host categories
Improved
The maximum offset value has been increased to 2000
Improved
Added sorting of view templates in alphabetical order
Improved
Processing pre-selected objects as replaceable
Improved
The category “Windows” has been added to the list of categories to cut out
New
Added the ability to create worksets by the name of linked documents
New
Added ability to duplicate groups
New
Added ability to duplicate configurations
New
Expanded Organization settings
New
Added ability to collapse/expand window contents
Improved
Workset processing: added sorting of worksets in alphabetical order
Improved
Workset processing: do not close the window after commands are executed
Improved
Workset processing: fixed a bug where multiple copies of the plugin window could be opened
New
Maintaining the position of displaced rods after a set has been exploded or split in Revit 2022 and higher
New
Added ability to disable the results window when changing the presentation
New
Added ability to skip sets of two rods when changing the presentation
New
Added ability to copy values of shared parameters from rebar to the Structural Rebar Coupler
New
Added saving of visibility state on all views
Improved
The rebar selection window has been replaced with a pop-up dialog box
Fix
Fixed a bug where in some cases rebar was displaced if the “Spread of Rebar joints” option was enabled
New
Added processing of Structural Rebar Couplers
Improved
Removed ability to view plugin video
Improved
Added ability to open plugin page
New
Added ability to copy along a curve with various settings
New
Added processing of elements in the category "Structural framing"
Fix
Fixed some bugs in elements filter operation
Fix
The horizontal and vertical dimension position options for walls have been mixed up in places. Fixed
New
Deletion of dimensional chains consisting entirely of zero-length segments
Fix
Fixed a bug where the contents of the switched Organization Settings configuration were not reloaded
Fix
Fixed a bug where the contents of the switched Organization Settings configuration were not reloaded
Fix
Fixed a bug where properties not related to font were overridden in Schedule cells
Improved
Added tolerance when processing geometric properties of floors
Fix
Fixed a bug where the image was incorrectly displayed when the cursor was hovered over the settings of horizontal bars at the bottom in the framing of openings
Fix
Elements filter: safely load sets of categories given the absence of any categories in an earlier version of Revit
Fix
Fixed a bug where 3D polylines might not be selected
New
The replacement area "Text of Schedule contents" is divided into contents and headings
Improved
Added "Canvas color scheme" option to the color schemes settings
Fix
Fixed "No work plane set in current view" error
Fix
Unused lookup tables: fixed an issue where lookup tables were not taken into account if multiple tables were specified in a formula
New
The main algorithm has been improved
New
Coloring tabs: text color is made part of the color scheme
Fix
Fixed an error occurring when selecting elements from a linked file
New
Added possibility to specify the position of Spot Diemsions for floors
New
Added possibility to specify the position of Spot Diemsions for MEP elements
New
Processing of faces instead of edges for solid elements
New
Creating a Spot Dimension from the extreme point of the element geometry
Improved
Layout of U-shaped bars of horizontal reinforcement taking into account the cover at the ends of horizontal reinforcement
New
Added “Check all” and “Uncheck all” options
New
Added search in Schedules name and headers
Fix
Fixed a search error with the "Whole Word" option enabled
Improved
Selection of the current sheet in the tree when opening the plugin
Fix
Fixed an error occurring if a drawing has blocks with a name error
New
Added the ability to check (or uncheck) selected items in lists
Improved
Prohibit changing the backup folder in the Autosave service settings if the path is set by the organization settings
Improved
More correct processing of environment variables set in the Autosave service settings
New
Added plugin settings window instead of command requests
New
Added ability to replace objects (circle, ellipse, point) with a block
New
Added ability to copy values of identical attributes from the block being replaced to the block it replaces
New
Added support for sheet collections in Revit 2025
New
Added the ability to rename a sheet
New
Added the ability to delete a sheet
New
Added the ability to not change the number in simple numbering, allowing only the Prefix and/or Suffix to be set to an existing sheet number
New
Added ability to insert non-printable characters in Prefix/Suffix during simple numbering
New
Added the ability to decrease or increase the number of sheets in a group by a specified value
Improved
Changed the licensing system (30 days trial period)
New
Added support for sheet collection
New
Added copying of Detail Lines
New
Added ability to copy values of Sheet and TitleBlock parameters
Fix
Fixed a bug that occurs when copying Legends containing elements that have a sketch
Fix
Correct sorting of groups in the sheet tree
Fix
Correct sorting of groups in the sheet tree
New
Added support for sheet collections (Revit 2025)
Improved
Added display of the name of the current settings configuration in the upper right corner of the window
New
Added support for sheet collections (Revit 2025)
Fix
Taking the system type name into account when comparing categories
Improved
Using nominal diameter values in the Model Diameter parameter when creating rebar types in Revit 2022 and later
Improved
Using nominal diameter values in the Model Diameter parameter when creating rebar types in Revit 2022 and later
Improved
Correct consideration of framing diameters when calculating the top and bottom cover
Improved
Using nominal diameter values in the Model Diameter parameter when creating rebar types in Revit 2022 and later
Improved
Using nominal diameter values in the Model Diameter parameter when creating rebar types in Revit 2022 and later
Improved
Using element geometry without considering the current view
New
Added ability to change font color
New
Added Tag Label types to the processing tree if plugin is run in a family
Improved
Added renaming in families when processing families from a project document
Improved
Hidden some options when running plugin in a family
Improved
Added restriction on processing of room contour sections with length less than 20 mm
Fix
Fixed a bug where a dark tab coloring theme with a light Revit design theme was reset (and vice versa) after closing the settings window
New
Added the ability to create a folder for storing backup files in the autosave service when using Organization Settings
Improved
Small design improvements
Fix
Fixed a bug where commands from the “Tools” plugin were missing from the “Favorites” panel
Fix
Fixed a bug in launching the settings window in some cases in Revit version 2023 and below
New
Added “Color Schemes” tab to settings
New
Added three new built-in commands
New
Added clipboard support in elements filter
New
Added category sets in elements filter
New
Added support for Organization Settings with autosave service
New
Added synchronization with Revit options in the Tabs visibility service
Fix
Fixed a bug where the rebar type set in the settings was not taken into account when bending vertical bars into a slab above it
Fix
Fixed resetting of some parameters when duplicating configurations
Fix
Fixed plugin freezing in some cases when selecting a line type
Improved
Added processing of level coordinates by the geometric mean point of the describing rectangle on the current view
Improved
Service update
New
Added search
New
Added ability to replace font in Schedules
New
Added ability to exclude elements with specified font from processing
New
Added ability to rename dimension and text styles by mask
Improved
Added ability to open export folder in Explorer
Fix
Fixed resetting of user settings when "Get" is pressed
Improved
Improved bending of upper longitudinal bars on both sides of the beam
Improved
Added processing of Multi-Rebar Annotations
Fix
Fix some bugs
Fix
Fixed an error occurring when inserting a stamp if the current layer is locked
Fix
Fixed a bug where vertical reinforcement length limitations under the first opening and over the last opening were not taken into account
Fix
Fixed a bug where the wrong shape was set when reinforcing intersections with a single L-shaped bar
Fix
Fixed a bug where a parameter might not be found for a room in Revit 2021
Improved
Added the ability to run the "Select by id" command through the dockable panel
Improved
Changed position of some buttons
New
Added ability to specify surface pattern and transparency
New
Added ability to specify line type
New
Added ability to select elements by filter
New
Added support for Organization Settings
Improved
Plugin window made non-modal (does not block Revit window)
Improved
Correct sorting of items when collecting data from a drawing
Improved
Closing the plugin window in case of parameter creation error
Fix
Ignoring an error that occurs when checking the clipboard
New
Added processing of objects in assemblies
New
Correct assembly processing in Renga version 8.0 and higher
Improved
Display of types in alphabetical order
Fix
Fixed localization error in the units dialog box
Fix
Fixed a bug where there were two spaces in some command names
Fix
Fixed a bug where model groups were not processed
Fix
Fixed a bug where the top mesh of background reinforcement was created twice
New
Added display of parent tab name in command line mode
Improved
Forced hiding of button names on the ribbon
Improved
The category “Rebar” has been added to the list of categories to cut out
New
Added ability to process elements without taking rooms into account
Fix
Fixed an error that incorrectly calculated the vertical offset of stirrups in opening framing
Fix
Fixed a bug where L-shaped joints into the slab were not created
Fix
Corrected a bug where straight joints were reduced by the length of the ends cover
New
Added the ability to reset the number for each level (non-directional numbering)
Improved
The big button on the ribbon has been replaced by two small ones
Fix
Fixed some bugs
Improved
Correct display of groups for selecting the start of numbering, if only grouping by “Housing” parameter is enabled
Improved
Optimization of reinforcement settings initialization speed
Improved
Optimization of reinforcement settings initialization speed
Improved
Changed the principle of specifying an offset from the contour when creating reinforcement by area
Improved
Added possibility to set zero indentation of the additional bar on the edge of the slab
Fix
Fixed an error that did not take into account stirrups in the framing of holes when calculating the cover layer
Improved
Optimization of reinforcement settings initialization speed
Improved
Optimization of reinforcement settings initialization speed
Improved
Changed status of the document GOST 5781-82
New
Added the ability to place joints bent into a slab in the same plane
Fix
Fixed a bug where saved layer settings were not loaded
Improved
Increased the maximum allowable value of bend binding to a slab face
Fix
Fixed a bug where the column profile was incorrectly detected in some cases
Improved
Optimize pattern list display with dark design theme
Improved
Optimize pattern list display with dark design theme
Improved
Connector connection tolerance has been reduced
Improved
Unpacking groups and assemblies during preselection processing
New
Applying the saved value of the switchable menu when the ModPlus tab is activated for the first time
Fix
Fixed a bug in the hook turning algorithm occurring in some cases
Fix
Fixed a bug in the hook turning algorithm occurring in some cases
Fix
Fixed a bug in the hook turning algorithm occurring in some cases
Improved
Rounding the area factor to three decimal places
Improved
Improved background reinforcement generation algorithm
New
Added the ability to display a notification when a level is deleted
New
New algorithms for creating rebars
New
Integration of rebar shapes into reinforcement settings
New
Changed licensing principle
New
Added settings storage
New
Redesigned the list of transverse reinforcement details
New
Added possibility to set a different diameter in the top row
New
Added ability to create details in beam intersections
New
Many other fixes and improvements
New
New algorithms for creating rebars
New
Integration of rebar shapes into reinforcement settings
New
Changed licensing principle
New
Added settings storage
New
Added possibility to create longitudinal reinforcement with individual bars
New
Added possibility to set protective layer based on reinforcement settings
New
Redesigned the list of transverse reinforcement details
New
Added possibility to create an odd number of working reinforcement bars in circular columns
New
Added possibility to specify the direction of bending of longitudinally bent bars
New
Many other fixes and improvements
New
New algorithms for creating rebars
New
Integration of rebar shapes into reinforcement settings
New
Changed licensing principle
New
Added settings storage
New
Rewritten the algorithm for generating background reinforcement
New
Added option not to cut U-shaped bars with the slab body
New
Many other fixes and improvements
New
New algorithms for creating rebars
New
Integration of rebar shapes into reinforcement settings
New
Changed licensing principle
New
Added settings storage
New
Added automatic selection of underlying slabs
New
Added processing of openings created in wall sketch
New
Added possibility to place stirrups and U-bars in opening framing with the step of background reinforcement
New
Added ability to create U-shaped bars instead of horizontal reinforcement
New
Added possibility to specify thickening of horizontal reinforcement in the upper zone of the wall
New
Many other fixes and improvements
Improved
Safe loading of auxiliary libraries
Improved
Added processing of preselected elements
Improved
Additional error checking when exporting the current sheet
Fix
Fixed a bug that caused the change of the default printer in the system
Fix
Fixed a bug with instant closing of the context menu occurring for some users
New
Added copying of parameter values when creating a duplicate of material
Fix
Fixed an error when apartments with the same functional purpose were not merged
Improved
Handling beams that have Solid at a Corse detail level
New
Removed intermediate archiving of downloaded installation files
New
Removed auxiliary downloading of updates from the web service
Improved
Fixed various bugs and made improvements to the update algorithm
Improved
Display filters in the order specified in the view settings (Revit 2021 and above)
Improved
Level mark: added ability not to create a bottom shelf
Fix
Fixed a bug where the vertical indentation of a segment in a dimension chain could be double if the text of the neighboring segment was not offset
Fix
Fixed a bug where the "from element" direction was not detected in some cases
Improved
Correct plugin window behavior when minimizing Revit window
Improved
Various fixes and improvements
Fix
Correct name of the "Other" group in Revit 2025
Improved
The category "Room Separation" has been added to the category filter
New
Added the ability to specify multiple apartment identifiers
Fix
Correct definition of dynamic blocks name when selecting similar blocks
New
Correct replacement of blocks placed on Layouts
Improved
Correct accounting of view template settings when changing import category visibility
Fix
Fixed a bug where the plugin would crash when trying to render some patterns
Fix
Correct sorting of numeric position values
Improved
Changed the source for downloading localization files
Improved
Correct plugin operation in cases when layers were added after loading
Fix
Fixed color of text in tooltips
Fix
Fixed an issue when trying to follow a link in AutoCAD 2025
New
Fixed an error occurring when loading sheets by sections in Renga 8
New
Added "Start from projection" option
New
Added fittings accounting
New
Added "With same dim style" option for dimensions
New
Added "With same global width" option for polylines
Improved
Accounting for vertical displacement of the project base point
Improved
Clearing the height given by the formula of the form \Hn.n;
Improved
Sorting the Title Blocks of the composite sheets horizontally
Fix
Taking into account properties changed in the sheet list when exporting the current sheet
Fix
Fixed a bug where the total number of problem sheets was not displayed
Fix
Fixed a bug where the number of sheets preselected in the Project Manager was not displayed
Fix
Fixed a bug where Pattern from a circle (creating from Drafting View) was created incorrectly
New
Updated document templates to reflect changes made by Russian Government Decree № 717 from 06.05.2023
Improved
Ignoring unplaced rooms when obtaining room solids
Improved
Elements filter: added specialized processing of the "Host category" parameter
Fix
Fixed a bug where changes were not saved after editing the layer list
New
Added "Update existing" option
Improved
Using integer and fractional part separator from document settings
Improved
Improved algorithm for determining the direction of created views when processing rooms with complex configurations
Improved
Added additional entries to the log of the autosave service
Fix
Fixed time format in the log of the autosave service
New
Added ability to process Text Annotations using regular expressions
New
Added ability to sort the list in ascending or descending order
New
Added ability to move the selected layer to the beginning of the list
Fix
Fixed error of processing text that does not have text style set
Improved
Preserving global width when dynamically adding a new segment
Fix
Fixed some errors when working with elements from linked files
Improved
Added processing of coordinates by geometric midpoint for Filled Region
New
Added export and import of sets
New
Added the ability to select all target documents
Improved
Suppression of the window with a message about repeating types when the "Suppress warnings" option is enabled
Fix
Correct location of Elevations/Sections when selecting rooms from a linked file inserted with an offset
Fix
Fixed a bug where the ModPlus folder size was calculated incorrectly
Improved
Add strategy description to exported excel file
Improved
Include strategy description from imported excel file when importing strategies or importing rules with replacement
New
Added new smart object "Revision mark"
New
Added new smart object "Node designation"
Improved
Using auxiliary graphics when moving points of linear objects
Improved
Secant nodal leader: added possibility to set text indent
Improved
Correct processing of multi-line text borders
Fix
Fixed window design in dark design themes
Fix
Fixed a bug where it was possible to run search commands multiple times
Fix
Fixed a bug in changing the direction of linear objects that are scaled to a different scale
Improved
Improved the algorithm for determining the direction along the wall to create views
New
Added room filter by parameters to the "Apartment editor" tab
Improved
Added the ability to collapse/expand all levels in the "Apartment editor" tab
New
Added "Align vertical" command
New
Added fitting processing to the "Align" command
New
Added "Run in cycle" option to the "Set distance" command
Improved
Added processing of conduits to the " Multibuild" command
Improved
Changed the order of actions in the "Set distance" command 
New
Added "Copy in direction" command
New
Added possibility to connect elements not only in vertical MEP curves
Improved
Added saving of marked levels in the "Copy by level" command
Improved
Correct sheet sorting
Improved
Ignoring non-basic levels for collected rooms when combining apartments into multi-levels
Fix
Fixed an error occurring when attempting to load a configuration file of an obsolete type
Fix
Fixed errors occurring with the "By core edge" break option
Fix
Fixed a bug where it was not taken into account that a parameter was related to a type when saving presets (the change is only taken into account in presets created after an update)
Improved
Built-in commands: do not show button for dwg that cannot be updated
Fix
Fixed an error that occurred in some cases when rotating fittings with a longitudinal connection
Fix
Corrected a bug that prevented connected elements from rotating to a rotating fitting in some cases.
Fix
Fixed a bug where the window width was incorrectly changed
Fix
Fixed a bug where open views were not added to the list of views
New
Added ability to minimize window contents
Fix
Fixed a bug where views continued to synchronize after closing the plugin
Improved
Service update
Improved
Added processing of handrails and railing support as nested families
Fix
Fixed a bug that occurs when trying to check all/uncheck all when the sheet list is empty
Improved
The sheet selection checkbox has been replaced with buttons to select and deselect sheets
New
Built-in commands: added selection of the host for rebars in the system
Fix
Elements filter: fixed the design of the parameter selection list in the dark theme
Fix
Elements filter: fixed a bug where the parameter selection list was not scrolling in the group condition
Fix
Fixed a bug in the algorithm for calculating the local General version count
Fix
Fixed a bug in the algorithm for calculating the local General version count
New
Added ability to perform PDF compression
New
Added ability to connect connect connectors of different sizes in the "Connect connectors" command
Fix
Fixed some errors in the operation of the tab hiding service
New
The top constraint of the created walls is not set if the profile of the original wall was above the level of the original wall
New
Added ability to compare more than two models
New
Added ability to select multiple categories for filtering
New
Added ability to select Type instances in a model and copy their IDs to the clipboard
New
Added ability to save selected columns
New
Added ability to change the Type name
Improved
Added processing of "Workset" parameter
Fix
Fixed a bug where underscores were not displayed in column names
New
Added output of sheets that do not have a section assigned to them
Improved
Added section sorting
Fix
Fixed a bug where the number in a section was incorrectly determined
Improved
Optimization of some algorithms
Improved
Correct processing of Dimensions with zero value of "Text offset" property
Improved
Autosave service: transfer backup folders after closing a document
Fix
Corrected the list of reinforcement classes for light meshes according to GOST 23279
New
Added check that Revit dialog with built-in preview is open and disable the service in this case
Improved
Accounting for API differences in Renga versions before 7.4.x and after 7.4.x
Fix
Fixed error of getting list of sheets by sections in Renga 7.4.x
Improved
Added processing of families in the category "Structural Rebars"
New
Added ability to export sheets by sections to pdf and oxps
New
Added ability to export sheets to a single pdf file
New
Added sets that allow to save position and state of sheets
New
Added ability to drag and drop sheets in the list
New
Added ability to open a folder after exporting
Improved
Replaced folder selection dialog
New
Redesign of license server connection settings. Display more data when checking the connection to the Web License Server
New
Redesign of license server connection settings. Display more data when checking the connection to the Web License Server
New
Redesign of license server connection settings. Display more data when checking the connection to the Web License Server
New
Redesign of license server connection settings. Display more data when checking the connection to the Web License Server
New
Added algorithm for determining the dimension direction relative to the element
New
Added "Offset selected" command
Improved
Added processing of pre-selected dimensions when manually offsetting or restoring dimension text
Improved
Changed text offset direction for some cases
Improved
Added processing of groups when numbering by curve
Fix
Fixed a bug where multiple copies of the plugin could be run
New
Create parameters in project: added possibility to select all categories in the list
Improved
Create parameters in project: the button for editing the list of categories has been moved to the list of parameters
Improved
Create parameters in project: actualized list of categories
Improved
Removed restriction on group selection when numbering on a view
New
Made changes to public methods used in plugins
Improved
The command "Hide/Show Links" is divided into two - "Hide/Show Links" and "Hide/Show Import Symbols"
Improved
Removed transaction grouping in the "Connect connectors" command
Improved
Added connector check in the "Connect connectors" command
Fix
Fixed a bug where multiple copies of the plugin could be run
Fix
Fixed an error occurring when copying some families
Improved
Added the ability to select the top level for the Telephone Devices category
Fix
Correct processing of families without host
New
Added the ability to change the top constraint
Improved
Added the ability to add incorrect rooms located on a different level to an apartment
New
Added ability to select a base element to which the element to be rotated is not connected
New
Added the function of rotation without taking into account longitudinally connected elements, if such a connection is present
Improved
Improved algorithm of wall processing taking into account the presence of a vertical profile in the wall
Improved
Added minimum note width in the configuration edit window
Fix
Fixed data loading error when selecting a configuration file if organization settings are used
Fix
Fixed a critical bug causing increased load on the server
Improved
Calculation of local general version in the background
Improved
Correct processing of a Schedule parameter that used in grouping
Fix
Correct processing of parameters of "Yes/No" type during search and replacement in Schedule filters
Fix
Fixed a bug where the plugin could not be re-run
New
Added new auxiliary methods used in reinforcement plugins
Improved
Service update
Fix
Fixed an error in forming file names when exporting separately
Fix
Fixed export error in Revit 2025
New
Removed the mechanism for selecting elements for bending via the element selection event
Fix
Fixed a bug where ducts were rotated in some cases
Fix
Added missing icon for dark design theme
Improved
Moving the cursor to the "Switch to 2D" button in the "Grid mode" command
New
Added large icons for all commands except "Hide" and "Show" commands
New
Added "Unhide elements" command
New
Added processing of fittings for pipes, ducts and cable trays in the "Sum of lengths" command
Improved
Avoiding zero dimensions when selecting dimensions
New
Added sorting of configurations
Fix
Fixed a bug where in some cases a message would appear that nothing had been processed
Fix
Fixed a bug where multiple copies of the plugin window could be launched
New
Added a built-in command that allows you to update the Link
Fix
Fixed a bug where the displayed value of category list and parameters for elements filter did not change after duplication
Fix
Fixed a bug where volume views for rooms from a linked file were incorrectly displayed
New
Processing of rooms and spaces taking into account the phase of the current view
Improved
Added a border for the element that allows you to set a color
Fix
Fixed a bug where previously created volume views were not deleted if they were not present in the current list
New
Moving the cursor to the "Continue" button when opening the plugin window
Fix
Fixed a bug where some element categories from linked files were not being processed
New
Added support for Revit 2025
New
Added support for Revit 2025
New
Added a built-in command that allows you to select the elements of the current document referenced by the selected dimensions
Improved
Replaced the folder selection dialog
New
Added option to disable line preview on the Plan
New
Added processing of elements that are not orthogonal to the axes
New
Two commands merged into one
New
Added line preview on the plan
New
Added work in the family editor
New
Added new categories
New
Added organization settings
New
Added ability to undo changes made to the configuration
New
Added Select, Delete, Colorize option for Warnings and Warning groups
New
Added the ability to update the Warning list
Improved
The "Isolate" option has been moved to the bottom of the window in a separate button
New
Fixed some bugs
Fix
Fixed a bug where it was possible to run multiple copies of the plugin
New
A function for determining the direction of rotation in scenarios with two possible directions has been added to the "MEP Rotation in direction" command
New
Optimized conversion algorithm
New
Added sorting of sets and configurations
New
Added support for AutoCAD 2025
New
Added support for AutoCAD 2025
Improved
Setting the width factor and oblique from the current text style to the created attribute of the number in the volume
Fix
Fixed a bug where conditions on parameters containing the ">" condition were incorrectly imported in the elements filter
Improved
Forced loading of the auxiliary library
New
Added setting configurations
New
Added Schedule sets for reselection
New
Added ability to export Title and Footer
New
Added ability to save formatting
New
Plugin window is made non-blocking Revit
Fix
Fixed errors with data type conversion
Fix
Fixed an error occurring when exporting large Schedules
Improved
Special processing for dimensions referring to walls
Improved
Added "Active View" option to the left list
Fix
Fixed an error occurring when checking the availability of news on computers with Hebrew in the regional settings
Improved
Creating and applying a switchable menu after Revit is fully loaded
Improved
The maximum value of the area factor is increased to 1.1
Improved
Added option to accept changes if some dimensions could not be created
New
Added processing of the category "Structural Columns"
New
Added ability to synchronize view crop and 3D view section box
Improved
Correct switching between project and family documents
Fix
Fixed design in dark design themes
Improved
Delete volume view for rooms that were deleted while the plugin window was open
Improved
The REFEDIT command has been added to the exclusion list
Fix
Fixed a bug where saved configurations were not loaded
Improved
Elements filter: exclude from processing categories whose system name contains _gbXML_
New
Added ability to disable built-in commands in the settings window
Improved
Returned the ability to launch the context filter in group and assembly editing mode
New
Processing of the host element when selecting the insulation
Fix
Fix some bugs
Fix
Fixed a bug where underscores were not displayed in view names
New
Disabling auto calculation service during synchronization
New
The option "Group transactions" has been added to the "Multibuild" command
Improved
Optimized the function of setting the vertical distance between MEP curves in the "Set distance" command
Fix
Fixed a bug preventing vertical MEP curves from being selected in the "Set distance" and "Multibuild" commands
Fix
Elements filter: fixed an error occurring when collecting parameters from categories whose elements do not exist in the current document
Fix
Fixed an error occurring when closing the plugin in a detached document
Improved
Correct copying of filters that are not applied to views
Improved
Disabled closing by pressing Esc for child windows of the plugin
Fix
Fixed a bug where truss components were not processed
New
Added the ability to select all elements in a category
New
Creating a "Favorites" menu after all plugins are loaded
Fix
Fixed a bug where the names of some buttons in the "Favorites" menu were displayed incorrectly
Fix
Fixed "This key is not in the dictionary" error occurring in some cases when loading Revit
Fix
Fixed a bug where the text of small buttons in the "Favorites" menu was hidden regardless of the settings
New
The "Favorite Commands" service has been reworked
New
New items were added to the active tab context menu
New
Added the ability to separately enable moving backup files and moving backup folders in the autosaver
New
In the category selection dialog, added the ability to check categories whose elements are present in the current view 
Improved
Decreased the minimum allowable window width
Improved
Added getting sorting point for tags
Improved
DWG/DWX settings option "Export Setups" added to the main plugin window
New
Changed algorithm for checking intersection of openings and rooms
Improved
Disabled closing of plugin window by ESC
Fix
Fixed tooltip for the delete set button
Fix
Fixed a bug where links were still displayed when loading the plugin if the corresponding checkbox was unchecked
Fix
Fixed a bug that occurs when trying to show/override an element that has been deleted
Fix
Fixed an error occurring when switching to a view that does not support graphics overrides
Improved
Ignoring positions without value when creating filters by parameter value
Improved
Redesign of the window with notification of expiring subscriptions
Fix
Fixed an error that incorrectly created filters on parameters with data type "Double"
Improved
Added option to hide the warning about discontinuation of support
Fix
Fixed design with dark design themes
Improved
Fixed design with dark design themes
Fix
Fixed error of getting parameter values when using the system name or GUID of a parameter
New
Configurations
New
Alphabetic numbering
New
New sorting algorithm on views
New
Grouping by parameter
New
Possibility to deselect an element in an ordinal selection
Improved
Installation window redesign
Fix
Correct processing of viewport positions
Fix
Fixed a bug where the new plugins installation window was blocking the pop-up news notification window
Improved
Added possibility to use project text parameters in the control that allows to set parameters for reinforcement (used in reinforcement plugins)
Improved
Optimize load speed
Fix
Fixed error in SMIRRORED function
Improved
Added GOST 27772-2021
Improved
Added "Automatically install new plugins" option to the new plugins window
New
Added option to specify side offset
New
Added possibility to use source element parameters in the layout name
Improved
Exclusion of unlocated and redundant rooms from processing
Improved
Exclusion of Zones from processing
Improved
Improved algorithm for obtaining the room contour
Fix
Fixed a bug where all rooms were selected instead of rooms in the current view
New
Added "Merge splines" command
New
Added "Electrical Devices" item to the "Hide/Show category" command
Improved
Changed the icon of the "Sum of lengths" command
Improved
Accounted for the "Select pinned" option in the "Select annotations" command
Improved
News window redesign
Fix
Elements filter by parameters: fixed an error when spaces in checked values were not saved
Improved
Boolean parameters in conditions can be checked with 0 and 1, Yes and No, True and False
Fix
Fixed error of checking conditional values if checked values have the same conditional symbol
Fix
Fixed an error occurring when closing a window
Fix
Fixed an error occurring when opening families if a plugin was previously opened
Improved
Optimize plugin loading speed
Improved
The command " Install all visible" has been replaced by "Install all"
New
Added ability to use Unicode characters in the prefix or suffix of a sheet number
New
Added ability to search and replace in legend name
New
Added ability to search and replace in filters of duplicated schedules
New
Added the ability to abort the duplication procedure
New
Added ability to select specific views placed on a sheet for processing
Improved
Automatic selection of a sheet when changing the name of a sheet in the tree
Fix
Fixed a bug where separated schedules were inserted incorrectly
New
Added "Edge-mounted Tray " command
New
Added "MEP Rotation in direction" command
New
Added new smart object "Concrete joint"
New
Added new smart object "Thick arrow"
New
Drawing only the last segment when creating linear objects
Fix
Fixed a bug where some smart objects remained in the drawing when the command to create them was canceled
Fix
Fixed some errors in the operation of linear objects
Fix
Fixed a bug where the rule source for rebar bending could not be changed
Fix
Fixed a bug where the rule source for rebar bending could not be changed
Fix
Fixed a bug where the rule source for rebar bending could not be changed
Fix
Fixed a bug where the rule source for rebar bending could not be changed
Improved
Changed STRINDEX function operation - the function returns position counting from zero
Fix
Fixed some errors in the formula editor
Fix
Fixed bug in general version detection if unsupported versions of working libraries are left on the computer
Fix
Fixed bug in general version detection if unsupported versions of working libraries are left on the computer
Fix
Fixed a bug in defining General Version if not all supported products are installed
Fix
Fixed a bug in defining General Version if not all supported products are installed
New
ModPlus General version
New
ModPlus General version
Improved
Do not show notifications about installation of component updates related to programs to which ModPlus is not connected
Fix
Fixed a bug in setting numeric parameter values that could cause incorrect operation with lookup tables
Fix
Fixed a bug where elements of some categories were being moved
New
Built-in commands: added processing of section and elevation designations with the "Open View" command
New
Added option to settings to specify which section will be opened when the plugin is launched in a family document
New
Added option to settings to enable case-sensitive search
New
When adding parameters from the SPF, parameters already existing in the current document are marked (only for projects)
Fix
Fixed a bug where there were unnecessary data types in the parameter data type selection dialog in the "Common" category
Fix
Fixed an error in creating parameters with the "Other" group in Revit 2022
New
Added arithmetic function POW (ascending to a degree)
New
Added ability to specify values in the "Workset" parameter
New
Added the ability to specify the type parameter forcibly
Improved
Improved algorithm of processing IF and FIRSTTRUE functions taking into account the presence of non-calculated contents
Fix
Fixed a bug in the NestedFamilies strategy where nested families were not processed if no parent family filter was specified
Fix
Ignored an error occurring in some versions of Revit when running the InRoom strategy in a document
Fix
Fixed a bug where fields in the favorites list were not being added
Fix
Fixed a bug where parameters and functions could be inserted into a field when the formula editor was active
New
Elements filter: added possibility to use conditional parameters ID, TypeID, Group, Assembly
New
Built-in commands: adding commands to a separate panel
New
Built-in commands: added "Select Rebars" command
New
Built-in commands: added "Select Host" command
Fix
Fixed a bug where the total number of sheets might not be counted
Fix
Correct behavior of the plugin window relative to the Revit window
Fix
Added a check that the plugin window is already open
Improved
Increased the maximum value of dimensional chains offset from 10 to 20
Fix
Fixed a bug where model lines were not processed
Improved
Closing notification windows on mouse click
Improved
Changed limitations of the free version
Improved
Taking into account the current user session when checking for open applications
Improved
Taking into account the current user session when checking for open applications
Fix
Connect straight: fixed a bug where existing connections were not restored
Improved
Built-in commands: added processing of families placed on a level with the "Set to view" command
Fix
Built-in commands: fixed the appearance of the "Select elements" command for beam systems in Revit 2019
Fix
Correct processing of dynamic blocks when replacing similar blocks
Fix
Fixed incorrect counting of the number of selected objects
New
Added search among selected objects
Improved
Added search of numeric values as string values
Improved
Added saving of search string
New
Added "Hide" and "Isolate" buttons
Fix
Fixed errors when working with presets related to processing elements without a category
Fix
Elements filter: fixed an error where case was not taken into account in all filter variants
New
Adding a button to the standard Revit "Selection" panel
New
Added processing of elements without category
New
Disabling dynamic selection when the "Selected Elements" context is selected
Fix
Family editor: correct processing of parameters without data type
Fix
Removed the algorithm for determining whether the "Change by group" property can be changed when reading project parameters
New
Prioritize using the cached value when retrieving a cell value
Fix
Fixed a bug where multi-level apartments were not being assembled in some cases
Fix
Fixed a bug occurring when processing walls with height exceeding length
Fix
Corrected link to the help page
New
Removed manual installation of updates
Improved
Reduced the time until embedded commands appear on the ribbon
Fix
Fixed a bug where the favorite formulas window might not close in some cases
Fix
Fixed a bug where in some cases the integer and fractional part separator specified in the settings was not taken into account.
Improved
Elements filter: case-sensitive checking of string parameter values
Improved
Fixed the algorithm for selecting nested components of the built-in "Select Components" command
New
Added new built-in commands
Improved
Reduced the display time of the pop-up notification about showing connection to the corporate license
Fix
Fixed some errors occurring during intersection processing
Improved
Added processing of walls with splines in their geometry
Fix
Fixed a bug where a warning was not missing for a custom format being added when changing properties
Fix
Fixed a bug where only the last condition among conditions with the same element filter was applied
Improved
Added additional error catching when handling mouseover event on floating menu
Fix
Fixed a bug where the result of an expression like "000" was converted to "0" when writing to a text parameter
Improved
Algorithm for searching for openings in Curtain Walls has been changed
Improved
Improved algorithm for determining the parameter data type for elements included in the Structural Connections
Fix
Fixed an error occurring when comparing parameter values of different documents
New
Added ability to write the total weight of plates to the Connection parameter
Fix
Fixed a bug where plates in Connections were not processed
Fix
Improved algorithm for rounding numbers
Fix
Improved algorithm for rounding numbers
New
Added possibility to write a reversed result
New
Added new command - Volume of layers to the parameter
Improved
Analysis of the geometry of bypassed elements that do not have a location line
New
Added Title text processing in Schedules
Fix
Fixed an error occurring in some cases when trying to get the value of a numeric parameter
New
Improved work with parameters of elements included in Structure Connections
Fix
Fixed a bug where a layer set for revision clouds was applied to regular polylines
Fix
Fixed an error occurring when processing engineering system elements in Revit 2019-2020
Improved
Increased transparency value
New
Creating parts by created DirectShape (solving the printing problem)
Fix
Fixed an error where linked documents were displayed in the list of target documents
Fix
Elements filter: fixed a bug where the wrong categories could be selected on reopening if the categories had the same display name
Improved
The "Plugins" palette is made inaccessible if there are no open drawings
Fix
Correct DirectShape creation when the survey point is offset
Fix
Fixed an error occurring when trying to edit the parameter comparison table
Fix
Fixed an error occurring in some cases when trying to retrieve a parameter data type
New
Saving Schedule Graphics splits (Revit 2023 and higher)
Improved
Taking local fonts into account when filling the font list
Improved
Added the ability to print in the font selection list
New
Added ability to specify horizontal alignment for created text
New
Added ability to specify list type for created text
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
New
Added Revision Cloud processing
Fix
Fixed a bug where a layer was not applied to selected objects if the settings were not previously saved in the drawing
New
Removing the Microsoft.Xaml.Behaviors.dll auxiliary library
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Consideration of only the extreme edges when dimensioning columns
New
Using file storage when downloading updates
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Fix
Fixed the algorithm for determining the used lookup tables, taking into account that a table can be specified in quotes
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Accounting for doors inserted into a curtain wall that is inserted into a room enclosing wall
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Using the ModPlus.Xaml.Behaviors.Wpf.dll library instead of Microsoft.Xaml.Behaviors.dll to resolve compatibility issues with other plugins
Improved
Changed the method of obtaining the list of available fonts
Improved
Added checking that Revit is in text note or model text editing mode
New
Added an icon on the "Apartment Editor" tab indicating that the apartment is multileveled
New
Added search for redundant and not enclosed rooms on the "Initial check" tab
New
Added ability to set table name by sheet name when importing sources from Excel
Improved
Improved algorithm for determining whether apartments can be combined into multilevel apartments
Improved
Use of three auxiliary lines instead of one when searching for the intersection of an opening and a room
Fix
Fixed a bug that could erase sources
Improved
Added processing of cable tray fittings
Fix
Fixed errors when linear elements were processed incorrectly
New
Added built-in commands
New
Active tab context menu: added "Close the other tabs of the current document" option
New
Active tab context menu: added window for selecting sheets to open if the view is located on several sheets
Fix
Fixed an error occurring when processing piles consisting of multiple solids
Fix
Fixed a bug where the window for selecting numbers from text did not appear when selecting a block with one attribute
Fix
Correct tooltip for the button to add an incorrect room to the apartment
Fix
Added check for falling within the range of acceptable values of width and height of the created text
New
Added update installation status indication for the component to the change history
New
Added update installation status indication for the component to the change history
Fix
Fixed a bug where openings and Grids on the floor plan were not processed
New
Added consideration of the fact that the element is already located on the given level
Improved
Added selection of elements when selecting the "Selected elements" option, if the elements were not selected before running the plugin
Improved
Added output of processed elements identifiers in the result window
Improved
Edits were made to the algorithm for calculating mathematical expressions to take into account the use of the comma as a decimal separator of numerical values
New
Added "Decimal separator of numeric values" option to the general settings
New
Added "Use the geometry of nested families if the family has no geometry" option to the general settings
New
Added the option to set a custom description for strategies
New
Added "Select all" and "Unselect all" buttons for the list of strategies
Improved
Added processing of the reference parameter "Subcategory" of reinforcing bars
Fix
Fixed a bug where the settings dialog was displayed incorrectly
Fix
Fixed "Some of elements cannot be copied, because they belong to a different view" error occurring when copying drafting views
Fix
Fixed "Some of elements cannot be copied, because they belong to a different view" error occurring when copying drafting views
New
Added new tab coloring schemes for the dark theme in Revit 2024 and higher
Fix
Fixed default tab colors for dark theme in Revit 2024 and higher
Fix
Fixed design errors in the settings window on the "Coloring tabs" tab for dark theme design
Fix
Correct DirectShape creation when the project base point is offset
Fix
Correct DirectShape creation with respect to the range of plans visibility
Fix
Fixed "Element elementId not found in this Document" error
Fix
Active tab context menu: fixed an error that opened a folder with a document instead of copying the path to the clipboard
New
Added built-in "Active tab context menu" service
Improved
Increased the maximum value of anchoring of joints to the Floor faces from 300 to 1000 mm
Improved
Increased the maximum value of anchoring of joints to the Floor faces from 200 to 300 mm
Improved
The possibility to select the type of rebars of periodic profile has been added for cross clamps
Improved
Replaced the folder selection dialog
Improved
Added tooltip with parameter value in parameter tree
Improved
Disabled window closing by pressing Esc key
Fix
Fixed a bug where the preset search did not work
Improved
Increased the tolerance used when checking the possibility of splitting from 1 to 20 mm
Fix
Fixed a bug that caused incorrect calculation of the number of parts in the "Maximum height" algorithm
Improved
Added tooltip with parameter name in parameter tree
Improved
Added processing of imported categories to the Hide Links/Show Links command
New
The "Raster images" category has been added to the Hide/Show command
New
The "Annotations" category has been added to the Hide/Show command
Improved
In the "Open Views" command, added sheet number accounting during sorting
Improved
Improved algorithm for checking local versions of core modules
Fix
Fixed a bug where the connection of created walls was not performed
Improved
Added the ability to use numeric parameters to record the number of sheets in a group
Improved
Correct handling of line break characters (\r\n or \n) used when specifying a value in multiline text
Improved
Uninstalling core module libraries of unsupported Revit versions
New
Added "Change language automatically" option to settings
New
Added "Change language automatically" option to settings
New
Added support for Renga Standard and Renga Professional
New
Added "Change language automatically" option to settings
New
Added support for Renga Standard and Renga Professional
New
Added support for German localization language
Improved
Added a check for the existence of a folder for transferring backups when Revit is loaded
Improved
Improved algorithm for setting 3D crop box by section visibility range
Fix
Fixed errors related to changing localization files
New
Added possibility to set 3D crop box by view visibility range
Improved
Added processing of Engineering Plans
Improved
Added tolerance when checking the intersection of 3D view boundaries and view visibility range
Improved
Unchecked a view when deleting an associated DirectShape
Improved
Retrieve view properties from the parent view of the dimension instead of the current active view
Fix
Fixed a bug that caused the algorithm for creating dimensions on the floor plan to hang in some cases
Improved
Added intermediate rounding to 5 decimal places for the area of the room taken from the standard parameter "Area"
Improved
Added "." and "+" characters to the list of composite number dividers
Improved
Optimized search for openings in Curtain Walls that are room boundaries
Improved
Added a new switchable "View" menu for adapting menus in Revit
Improved
Windows Platform FIPS encryption verification is disabled
New
Redesigned some windows
Improved
Removed display of news if any window is open
Improved
Removed Hardcodet.Wpf.TaskbarNotification.dll library
Improved
Removed display of "500 Internal Server Error" error
Improved
Removed display of menu by left mouse click
Fix
Fixed the algorithm for determining the used lookup tables, taking into account that the size_lookup function can have different number of arguments
New
Added "Lookup Tables" tab that allows to find and remove unused lookup tables
New
Added option to display a list of all shared parameters when searching for unused shared parameters
Improved
Added search for parameters in nested families when searching for unused shared parameters
Fix
Fixed "The referenced object is not valid" error occurring in some cases when deleting all groups
Improved
The DWG/DXF export settings option "Export views on sheets and links as external references" has been added to the main plugin window
Fix
Fixed a bug where it was not possible to save a print set
Fix
Fixed a bug where the "No" selection was not remembered in the dialog asking about opening an export folder
Improved
Removal of unsupported versions (2017 and 2018) of plugins for Revit
Fix
Fixed a bug where the value of the "Apartment Type" parameter was not copied from the room of a typical floor
New
Added the ability to process rooms and spaces from linked files
New
The service of automatic recalculation of areas has been returned and put into a separate command
New
Typical floors
New
Removed automatic area recalculation service
Fix
Fixed a bug where parameters were opened incorrectly in Notepad
Fix
Fixed a bug where hollow masses were not processed in the InMass strategy
New
Removing non-printing characters from a file name when forming a new layout name
Improved
Increased the limit on the number of functions in a formula
Improved
Adding to the list of processed elements of insulation of MEP curves regardless of the type of strategy
Improved
Added forced room collection when starting processing on 3D view
Improved
Added processing of isolation by InMEPSystem strategy
Fix
Fixed an error occurring when trying to get rays from the center of a solid having zero volume
Fix
Fixed a bug where types were incorrectly collected (not all) if there was a strategy that handled instances in the processing
Fix
Fixed the position of the grips for leaders in the smart object "Level mark on plan"
Improved
Added sorting of documents by alphabetical order
Improved
Added sorting of groups in the selection tree by alphabetical order
Fix
Fixed a bug where the "Hide links" option was not taken into account when launching the plugin
Improved
Changed parameter export format when opening in Notepad on the "Unused Shared Parameters" tab
Fix
Fixed a bug that caused errors in copying drafting views
Fix
Fixed export/import for InGroup, InMass, InRoom, InSpace, RoomBoundaries, ConnectionSubElements strategies
Improved
Improved algorithm for beam profile definition
Improved
Improved algorithm for obtaining cylinder height
Improved
Consideration of sorting when processing grouped schedules
Improved
Some improvements were made to the algorithm for processing grouped schedules
Fix
Fixed a bug where layers for blocks were not deleted after saving
Fix
Fixed a bug where block layers could not be deleted
Improved
Added checking of rooms by height (difference between levels not more than 1 meter) when collecting apartments
New
Added the ability to add selected problem rooms to the selected apartment on the "Collecting apartments" tab
Improved
Updated the name of the value saved in the settings to force reset the state of the automatic apartment recalculation service to "off".
Improved
Added interruption of the automatic apartment recalculation service when the plugin window is open
Fix
Fixed a bug in the warning catching service (used by some plugins) that caused looped processing of messages about an element occupied by another user
Improved
Removed the "Over all windows" property from the "Fields" window opened from the "Stamps" window
Fix
Fixed an error occurring when closing a project while a plugin window is open in Renga 6
Improved
Closing the plugin window when closing a project
Fix
Fixed an error occurring when closing a project while a plugin window is open in Renga 6
Fix
Fixed incorrect replace message when copying types
Fix
Fixed a bug where installed plugins were not added to the list of menus available for menu building until the Configurator was reloaded
Improved
Added processing of selection filters on the “View filters” tab
New
Added ability to duplicate filters and views
New
Added ability to use sets
New
Added ability to copy DWG/DXF, DGN export options
New
Redesigned settings. Added tooltips to settings options
Fix
Fixed a bug where Revit would fatally close after closing the plugin window
New
The plugin window is made non-modal (does not block the Revit window)
Improved
Added display of a warning icon in case the export directory does not exist
Fix
Fixed some bugs
Improved
Added stretch hatch preview in the create from drafting view window
New
Added possibility to set reverse order of sweep creation
Improved
Algorithms of Curtain Walls processing improved
Fix
Fixed an issue that caused AutoCAD to fatally close after closing the ModPlus settings window when using a license server and Classic mode is enabled
Fix
Fixed a bug where unnecessary parameters could be added to the "Same parameters" list in certain conditions
Improved
Added display of the number of values of same parameters
New
Added window mode
New
Added context for searching elements by view filters on the current view
New
Added context for searching elements by ModPlus filters on the current view and in the model (only in window mode).
New
Added ability to search for the same parameters with the same values for multiple categories
New
Added ability to save presets without parameter values
Improved
Added check if the group, assembly, or sketch editing mode is active before launching the context filter
Improved
Expanded the list of view types on which the context filter does not run
Improved
Removed support for Revit 2017-2018
Fix
Fixed design in dark design theme
New
Added "Export current" button to allow exporting the current sheet of the current document to PDF
New
Added check that the file is busy when creating a merged PDF
New
Added an option to PDF settings that allows you to disable adding an index when exporting a single composite sheet
New
When reading sheets, the sheets that were selected in the Project Browser before running the plugin are now checked
Improved
Added check for the absence of custom format name
Fix
Fixed a bug where the index of a composite sheet was added twice to the file name
Fix
Fixed a bug where a sheet was incorrectly cropped when exporting to PDF via PDF24 printer.
New
Added a new tab "Views"
New
Added "Delete all unused views" option to the basic cleaning
New
Added "Delete all empty work sets" option to the basic cleaning
Improved
Added display of the number of selected options in the basic cleaning tab
Improved
In the “Views” and “Schedules” tabs, added the ability to double-click to open a view
Improved
Family instances are now also considered when searching for a parameter's usage
New
Added built-in dialog for strategy selection when creating a new strategy
Improved
In the formula editor the instruction window is made non-modal (does not block other windows)
Fix
Added a limit on the number of rules when pasting from the clipboard when using a limited version of the plugin
New
Added the ability to specify how to apply a workset - to instances and/or types - for Import Symbols
Fix
Fixed an error when longitudinally bent rebars (bent "in a bottle") were created with an overhang beyond the column boundary
Fix
Fixed some bugs in the algorithm of room contour detection
New
Added search for installed Revit versions in the HKEY_CURRENT_USER registry hive in case there are no entries in the HKEY_LOCAL_MACHINE hive
New
Links to related news have been added to the change story
Improved
Small changes in the design of the change story
New
Added search for installed Revit versions in the HKEY_CURRENT_USER registry hive in case there are no entries in the HKEY_LOCAL_MACHINE hive
New
Links to related news have been added to the change story
Improved
Small changes in the design of the change story
Improved
Changed appearance of the list of supported products (removed grouping by version).
Fix
Do not create an "All Sheets" folder
New
Added option to not create a sheet to place a created view
Fix
Fixed some errors when working with Curtain walls
Fix
Ignoring the "document is not primary" error when checking the availability of buttons on the ribbon
Improved
The property specifying the end cover of the reinforcement has been removed from the joints settings
Fix
Fixed a bug where settings were not displayed in the default settings editing window
Fix
Fixed a bug where settings were not displayed in the default settings editing window
Improved
Improvements have been made to the contour creation algorithm for Area Reinforcement
Improved
Optimizing processing of commands in the ignore list
Fix
Fixed a bug that caused material names not to be displayed in the layer list
New
Added the ability to specify the material parameter from which the material name will be taken
Fix
Corrected headers for the element that sets straight rebars parameters in hole framing settings
Improved
Adding help called when F1 key is pressed for buttons with multiple commands
Fix
Fixed an error occurring in some cases when defining numbers in attribute values
Improved
Some algorithms for calculating the bending characteristics have been rewritten
Fix
Fixed some errors in the method of copying parameters
Improved
Removed ISOCPEUR font from transverse reinforcement layout preview images
Improved
Removed ISOCPEUR font from transverse reinforcement layout preview images
New
Added "Save windows position" option to the settings
Improved
Removed integer and fractional part separator from the settings
New
Added "Save windows position" option to the settings
Improved
Removed integer and fractional part separator from the settings
New
Added "Save windows position" option to the settings
Improved
Removed integer and fractional part separator from the settings
New
Added "Save windows position" option to the settings
Improved
Removed integer and fractional part separator from the settings
Fix
Fixed an error in which the "Floors" tab did not select Grids if the "Bind openings to nearest Grids" option was unchecked
Fix
Fixed horizontal sheet shift bug when printing to PDF in some Revit versions
Improved
The "Floors" category has been added to the list of allowable "What to cut" categories on the "Cut" tab
New
The option "Remove all Unreferenced views (Legends only)" has been added to the basic cleaning
New
Changes were made to take into account the ability to select a configuration storage file, when using the organization settings
Fix
Ignoring the "Unable to compute outline for viewport label" error when calculating sheet content boundaries
Improved
Replacing a pair of double quotes ("") with an empty string in the result of an expression evaluation
New
Added ability to exclude Title Blocks from processing by name
Improved
Removed search algorithm for Title Blocks located within the boundaries of other Title Blocks
Improved
Fixed algorithms that caused sheets to regenerate when the algorithm for determining print formats "By Title Block" was selected
Improved
Converting numerical parameter values from internal units to display units when checking with the element filter
New
Added the ability to change the algorithm for determining the print format for specific sheets
New
Added ability to change the "Colors" option for selected sheets in the list
New
Added settings for processing sheets that contain temporary mode views
New
Added printing options
New
Added an option to remember the selection in the dialog box with a prompt to open the export folder
Improved
A third state was added for sheet group checkboxes
Improved
Removed "Center" option
Improved
Removed "Content trim" setting
Improved
If the group name contains only invalid characters and the option to create a folder by group name is enabled, the folder name will be "Incorrect group name"
Improved
If the sheet has several Title Blocks and only one of them is printed, there will be no index added to the file name
Improved
If a sheet has Title Blocks that are completely inside the borders of other Title Blocks, they will not be processed by the plugin
Improved
Removed "Prefix" and "Suffix" settings
Improved
Saving the "Processing elements from linked files" option in the user settings file
Improved
Removing control characters LRM, RLM, ZWJ, ZWNJ, LRE, RLE, LRO, RLO, PDF, NADS, NODS, ASS, ISS, AAFS, IAFS, RS, US from string parameter value
Fix
Fixed an error that occurs in the algorithm of merging layers when two different files have layers with different case of the name
New
Removed plugin updates
New
Added possibility to get the height of selected 3D solids
Fix
Fixed a tooltip for some commands on the ribbon
New
The "Links" category has been added to the Hide/Show command
Improved
Additional verification of saved data in the view restore command
Fix
Fix some bugs
Fix
Added additional region check before cropping the view
Fix
Fixed an error that occurs when closing the plugin window if there are no open drawings
Improved
Removed the option that changes the state of autorun with Windows
Improved
Removed context menu item locks
Improved
Added a check for open module windows before opening new ones
Improved
Various minor fixes and improvements
Fix
Fixed a bug where a prefix was added to the file name when exporting without separating
Fix
Correct display of parameter names containing underscores in the "Associate Family Parameter " window
New
Added processing of openings placed in curtain walls
Improved
The "Curtain wall panel" category was added to the "Join" tab
Improved
Checking the existence of auxiliary lines before deleting when creating a hatch from the drafting view
Fix
Fixed some errors in the algorithm for determining the contour of the slab and the area reinforcement contour
New
Global saving of settings: now the settings will not be unique for each drawing
Improved
There is a change in the condition of searching for longitudinal bent shapes (bent "in the bottle"): the main segment of the shape must be the first in the list of segments
Fix
Fixed a bug where a suffix from a parameter was set as a sheet number prefix
New
Added dimensioning for walls
New
Added dimensioning for floors
New
Added processing of elements rotated in the plan for all dimensioning options
Fix
Fixed bug, when selected categories in RebarInSystem, InMEPSystem strategy rules were not saved
New
Added processing of the "Generic Model" category by all intersecting faces
Fix
Fixed an error that occurs when closing the formula editor
New
Added "Hide/Show formula" button in the list of rules
New
Added new strategies: Materials, InMEPSystem
New
Added new functions: STRINDEX, VALUESTR, EINDEX
New
Added dark theme support in formula editor
New
Added save of selected configuration
New
Added "Check all" and "Uncheck all" buttons for rule list
New
Added an icon to display fields in the formula editor that are in the favorites list
New
Added opportunity to launch Favorites Fields editor from the settings dialog
New
Added an option to update a favorite field in all rules of all configurations
New
Formula: added possibility to escape double quotes
New
Formula: added check for unescaped parentheses that do not relate to functions
New
Formula: extract all values in double quotes from a formula before checking and processing
New
Formula: added ability to use "Starts with", "Ends with", "Not starts with", and "Not ends with" conditions
Improved
Displaying a formula when a rule is selected in a list
Improved
Swapped user and system strategy names in the list of strategies
Improved
Added safe plugin launch: if an error occurs while reading the configuration file, the plugin will be closed without saving
Improved
Special processing of parameters "Type name" and "Family name" - if an instance is processed, these parameters will be taken from the type
Improved
The "Not starts with" and "Not ends with" conditions were added to the element filter by parameters
Improved
More detailed error text
Fix
Fixed a bug where a plugin would run only once per Revit session
Fix
Fixed bug in which not all parameters could be displayed in the grouping list
New
Added new auxiliary methods used in plugins
New
Added ability to add/delete commands by clicking on the "heart" icon in the "Favorite Commands" window
New
Elements filter: added button in the list of categories to display checked categories
New
Elements filter: added filtering condition "Absence of parameter"
Improved
Added ignoring the warning about intersecting Floors
Fix
Fixed an error that occurs when trying to get the value of a integer parameter of an element of a Structural Connection, when the parameter has never been set to a value
Improved
Improved algorithm for determining the contour of the slab
New
Rewritten plugin architecture. Faster removal of a large number of Imports
New
Added search by Import ID or view ID
New
Added button to open the folder with the source file for the Import that is inserted as a link
New
Added display of the number of visible and total number of Imports in the list
Improved
Small changes in the design of the Import list
Fix
Fixed an error that would reset filters after Imports were deleted
Improved
The "Structural foundation" category has been added to the list of allowable "What to cut" categories on the "Cut" tab
Improved
Increased horizontal text offset value for the middle segments of the dimensional chain
Improved
Added ability to specify a fractional value for the transverse reinforcement indent from the end of the beam
Fix
Fixed an error that, in some cases, incorrectly defined an indent from the end of the beam
Fix
Fixed a bug that created a vertical bend instead of a horizontal one in some cases
New
Selection of schedules for export is made through checkboxes
New
Added possibility to specify the name of the exported file
Improved
Conversion of values into numbers is made taking into account regional settings
New
Changed formulas for calculating the horizontal offset of dimensional text
Fix
Fixed a bug where vertical longitudinally bent rebars were created without being assembled in a set (they were created as separate bars)
New
Added search and replace in material names
Fix
Fixed an error that occurs when closing the window if the "Numbering" tab has never been activated
Fix
Fixed localization bug
Fix
Fixed localization bug
New
Added the ability to duplicate worksets in the settings window
New
he option "Remove all unused Level types" has been added to the basic cleaning
New
The option "Remove all unused Grid types" has been added to the basic cleaning
Improved
The maximum allowable spreading step is increased from 1000 to 2000 mm
New
Added possibility to change the parameter for the number on the "Numbering" tab
Improved
Consideration of instance identifiers of the linked file when processing openings in the apartment collection algorithm
Fix
Fixed a bug that caused an incorrect block/drawing to be added to the database if the "Current file" checkbox was checked in the add window
Improved
Added extraction of the tables file from the "Tables" plugin resources (if available)
Fix
Element filters: fixed an error that in some cases the types were not processed
Improved
Allowable sizes of openings, in which vertical or horizontal reinforcement is not cut, increased from 500 to 1000 mm
New
If the "Family name" or "Type name" parameter is specified, the values of these parameters will always be taken from the type
Improved
Element filters: if "Family name" or "Type name" parameter is specified in the filter, these parameters will always be checked at the type
Improved
Rounding the area factor in the room matrix to 2 decimal places
Fix
Fixed some bugs in UI
New
Using the orientation of the hooks inherent in the type of rebar when creating stirrups with hooks
New
Added an option to collapse/expand the window content
New
Using the orientation of the hooks inherent in the type of rebar when creating stirrups with hooks
New
Added an option to collapse/expand the window content
Fix
Fixed a bug where stirrups could not be created depending on the direction of the beam
New
Using the orientation of the hooks inherent in the type of rebar when creating stirrups with hooks
New
Added an option to collapse/expand the window content
Fix
Fixed a bug that didn't determine overhead floors for walls that are less than one meter high
Fix
Fixed an error that incorrectly determined the angle of diagonal rebars
New
Door direction accounting
New
Cutting solid door geometry
Improved
Trimming along room separators
New
When calculating free space in an adjacent segment, a two character margin is added to the length of the segment string value
New
The vertical offset is now calculated using the formula "2 text heights + text indent"
Fix
Fixed a bug that would cause AutoCAD versions 2022 and later to crash.
Improved
Замена экранированных символов в аргументах условных выражений
Improved
Removed correction of content position on layouts
Improved
Set Plot area to “Extents” and Plot scale to “Fit to paper”
Improved
Improved algorithm for comparing family names when searching for possible duplicates
Fix
Added sending of plugin startup statistics
New
Added the ability to lock viewports on imported sheets
New
Deleting layouts in unsaved drawings before importing sheets
Improved
Corrects the position of content on imported layouts if the Title Block graphics are offset from the origin of the Title Block block
Fix
Fixed a problem merging layers when import sheets into a drawing that already contains layers
Improved
If the window has zero Sill Height and the Head Height more than 2m, then it is considered a door
New
Added status indication when using the corporate license
New
Added status indication when using the corporate license
Fix
Removed the "Reference planes" category. Fixed some bugs
New
In the "Cut" tab added categories "Reference planes" and "Roofs"
Improved
Added rounding to 6 decimal places when converting numeric values of parameters from internal units to displayed units
Improved
Changed the algorithm for creating Tags for Rebar
Improved
The apartment collection algorithm has been amended to take into account cases where two rooms are connected by a window, but no room has yet been added to the apartment
New
Removed "Convert text to numbers" and "Use comma as delimiter" options
New
Added selection of schedules in the list if they were selected in the Project Browser before starting the plugin
Fix
A file selection dialog was displayed instead of the folder selection dialog. Fixed
Fix
Fixed an error, when instead of the parameters of horizontal stirrups the parameters of vertical rebars were displayed in the plugin window
Fix
Fixed a bug that prevented structural columns from being processed
Improved
Excluding from processing dimensions that are in an attached detail groups
New
Sending additional statistics data when using the web license server (for license server administrators)
New
Sending additional statistics data when using the web license server (for license server administrators)
New
Sending additional statistics data when using the web license server (for license server administrators)
New
Using secondary cloud storage as a source for downloading installation files
New
Using secondary cloud storage as a source for downloading installation files
Improved
Do not download the installation file again if the new version of the auto-update module could not be installed
New
Added ability to cut solid elements
Improved
Added a summary message if no elements are selected
Improved
Manual selection of elements to cut at one time
Fix
Fixed an error that could not create end reinforcement in transverse direction on some faces of the slab
Improved
Changed algorithm for checking running copies of the program
Fix
Fixed an error that caused the "Total area without factor" parameter in the apartment editor to be filled with the value of the "Total area" parameter.
Fix
Fixed bug that occurs when one of the IF function results is a double quote (empty string)
New
Added support for AutoCAD 2024 and Revit 2024
New
Added support for AutoCAD 2024 and Revit 2024
Improved
Building a Ribbon tab considering the design theme in Revit 2024
New
Correct replacement of types of element instances when the "Allow duplicates" option is enabled
Improved
Combining work results into a single transaction and then being able to undo all changes at once
Improved
Returned the previous rounding algorithm for areas
Improved
Changed rounding algorithm for areas
Fix
Corrected the orientation of views on the sheet
Improved
Considering the scale of the view when placing the view on the sheet
Improved
Returned the warning swallowing system with modifications
New
Added InRebarSystem strategy
New
Added ability to delete all strategies in configuration
New
Added ability to take the value of a reference element parameter
New
Added ability to copy/paste rules via clipboard
Improved
Changed the algorithm for checking arguments by "Equal", "Not equal" conditions - if arguments are not checked as strings, they are checked as numbers, only if one of the arguments is a number
Improved
The integer format of rounding in the ROUND function
Improved
Improved pattern of the curly brackets processing
Improved
Improved algorithm for processing conditional expression arguments
Improved
Removed all Revit warnings swallowing system
Fix
Fixed an error that incorrectly set the parameters of straight rebars in the framing of holes located in the bottom zone of the slab, when combining them
Improved
Copying of numeric and string parameter values when creating a new type in the target family
Improved
Added tooltips for property names
Improved
Minimum allowed value for step is reduced to 0.0001
Fix
Correct number format in case of filling the string parameter, the initial value is integer and the step is fractional
Fix
Fixed a bug with rooms that contain columns in Revit 2017-2021
New
Added "Make visible" option to the "Selected" tab
Improved
Removed window closing by pressing ESC key
Fix
Fixed an error that occurs when rotating trays
Improved
Changes were made in the work with the organization settings file
Improved
Changes were made in the work with the organization settings file
Improved
Changes were made in the work with the organization settings file
Improved
Changes were made in the work with the organization settings file
Improved
Changes were made in the work with the organization settings file
Improved
Changes were made in the work with the organization settings file
New
Added opportunity to lock/unlock apartments in the "Apartment Editor" tab
New
Added (duplicated) settings for floor area calculation in the tab "Calculate apartments"
Improved
Removed clearing of room parameters if their functional purpose is included in the list of allowed
Fix
Fixed an issue where apartments with different functional purposes could have the same identifier when being collecting
Fix
Fixed some errors when using the "Spread of Rebar joints" option
Fix
Fixed a bug that prevented excluded colors from being edited
Improved
Correct processing of "Sheet number" parameter
Improved
Using export start time when creating folders by time
New
Added copying of project parameters
New
Added export/import of settings configurations
New
Added export/import of custom formats
New
Added some settings for "default" export options in DWG/DXF export settings
Improved
Defined orientation for square formats as "Portrait"
Improved
Added tooltips for configuration control buttons for settings and custom formats
Fix
Fixed a bug where there was no text in the settings configuration deletion confirmation window
Fix
Corrected an error that duplicated the vertical bars of the background reinforcement when it was impossible to create L-shaped joints in the floor
Fix
Fixed some errors in the method of creating horizontal stirrups of background reinforcement
Fix
Fixed an error that did not change rebar type in rebar selection control during import from xml (used in reinforcement creation plugins)
Improved
Improvements have been made to the algorithm for creating a contour for background reinforcement created by "Area reinforcement"
Improved
Correct check of the "Workset" parameter in the element filter by parameters
Improved
Removed pre-resetting of the cover layer to zero, if the option "Make cover layer zero" is not set
New
Added option to disable loading via organization settings
New
Added option to disable loading via organization settings
New
Added option to disable loading via organization settings
New
Added option to disable news display via organization settings
New
Added ability to create user formats
New
Added ability to create an export subfolder by current date (date and time, date, time)
New
Removed the preset window. Collection settings moved to the plugin window
New
Added reading sheets by button with the ability to enable automatic reading sheets at startup
New
Added an option to check all selected sheets
New
Added ability to save selected or checked sheets as a print set
New
Added saving color scheme by sheets
New
Added ability to create different configurations of settings
New
Added export to DWF/DWFx
New
Added PDF trimming to fit the content (enabled in settings)
New
Added ability to set merged file name mask (PDF, DWF, DWFx)
New
Added an option to use project parameters (project information) in the filename mask and in the merged file name mask
New
Added possibility to use system variables and date items in the filename mask and in the merged filename mask
New
Added generation of bookmarks by sheets in a merged PDF
Improved
The license is checked when running the command, before the plugin window is displayed
Improved
Removed support for PDF-Xchange Lite printer
Improved
Added export folder preview (example)
Improved
Changed appearance of format switches
Improved
Output a warning message if the file name mask does not contain the sheet parameters
Improved
The field with the export folder name is made editable
Fix
Fixed some bugs when processing linked files
Fix
Fixed an error that incorrectly calculated the position of additional vertical rebars near intersections
New
Consideration of the column attachment when setting the offset
Fix
The "Add to entity" button is made active for any product
New
Conversion of numeric parameter values instead of processing the displayed value
Fix
Fixed the height of rows in lists in the "Fix family types duplicates" tab
New
Rewritten algorithm for determining slab contours
New
Added an option to collapse/expand the window content
Improved
Edits were made to the algorithm for determining the boundary of the slab
Fix
Fixed some errors in formula highlighting
Improved
Expanded the list of categories in the MEP Insolation strategy
Improved
Added processing of internal duct insulation in MEP Insolation strategy
Fix
Fixed an issue where a formula on a tooltip could be displayed with fields
New
Redesigned formula editor
New
Added MEP Insolation strategy
New
Added possibility to dissociate the target parameter from the global project parameter
Fix
The OST_Conduit category for Revit 2017-2019 has been added to the list of element filter categories
Improved
Added a small icon for the "Notching distance" command
Improved
Calling the method of rebuilding the switchable menu "Favorites" after the buttons on the ribbon are built
Fix
Fixed "Method not found" error that occurs after updating working libraries to version 14.2.1
New
Added "Favorite commands" service
Improved
Added automatic closing of modeless windows opened via a special auxiliary method when closing all documents in Revit
Fix
Fixed a header override for the reinforcement parameters edit control used in reinforcement plugins
Fix
Corrected incorrect minimum distance for shelf indentation in Chain Leader at scales less than 1:1
Fix
Fixed the icon on the "Rename" button on the "Apartment types" tab
New
Added search and replace in parameters
New
Added search and replace in generic annotations
New
Added search and replacement in viewport view name
New
Added search and replace in sheet number
New
Added an ability to copy element identifier to clipboard
New
Added ability to call the element display function
Improved
Save search settings
Improved
Moved focus to the plugin window after closing the results window
Fix
Fixed an error of wall splitting by levels when the wall has defined offsets
Fix
Fixed "Floor type is not valid for this floor" error that occurs in some cases when breaking up the floor
New
Added ability to create straight “Breaking in” joints with vertical displacement of the rods
New
Added ability to create U-shaped rods along the top edge of the wall only in areas where there is no overlying floor or wall
New
Added ability to create U-shaped rods along the bottom edge of the wall
New
Changed the list of categories in the "Cut" tab
Improved
Added titles for pairs of processed elements on the " Join" and "Cut" tabs
Improved
Skipping elements without geometry when the " Join" function works
Improved
Applying a workset of the original rebar in the "Explode set" and "Split set" commands
Fix
Fixed localization error on the selection button
Fix
Fixed "Method not found" error that occurs after updating working libraries to version 14.2.1
Fix
Fixed an error that for slabs less than 150 mm thick, the maximum step of the background reinforcement was 120 mm instead of 200 mm
New
Added the ability to set the spread for rebar joints
New
The plugin window is made non-modal (does not block the Revit window)
Fix
Sum of lengths: fixed a bug that caused non-linear elements to be processed if the elements were selected before the command was run
New
The " Sum of lengths" command now displays the sum of lengths of all selected linear elements
Fix
Fixed "Method not found" error that occurs after updating working libraries to version 14.2.1
New
Added NestedFamilies strategy (processing nested families)
New
Added function name mapping
Fix
Fixed "Method not found" error that occurs after updating working libraries to version 14.2.1
Fix
In the element filter by category, added handling of cases where saved data from a later Revit version is loaded that contain categories that are not available in an earlier Revit version
Improved
Removed export cancellation confirmation dialog
New
Added search in filters when searching for parameter usage
New
Added accounting for Organization settings that override menus on the "Adaptation" tab
New
Added support for Organization Settings to override menus
New
Added support for Organization Settings to override menus
New
Added support for Organization Settings
Improved
Added exclusion of white by default when printing in b&w pdf with color exclusion
Improved
Save the selected configuration
Fix
Fixed a numbering bug in the Schedule when an element has two parameters with the same target name
Fix
Fixed the "Value cannot be undefined" error that occurs when editing rooms
New
Added processing of views to which the template is applied, but disabled overriding of filters by the template
New
Removed Yandex.Metrica service used to collect launch statistics
Improved
Service update
New
Processing of target views with activated temporary view properties
New
Combining longitudinally bent rebars (bent "in a bottle") of the same shape and with equal step into a Rebar Set
Fix
Fixed "Attempt to modify the model outside of transaction" error when copying 3D view Crop Box
Fix
Fixed a bug that caused some characters to be deleted from a masked pdf file name
New
Added display message if the plugin is not added to the menu
Improved
Increased timeout time when checking for Internet access
Improved
Improvements were made to the algorithm for finding the intersection of elements with a curve
Fix
Fixed an error that incorrectly detected the width of the selected print format
New
A more detailed message if the parameter value could not be set because the parameter has the "Read-only" property
Improved
Skip from processing of families created based on a level or plane
New
Added the ability to select the algorithm for determining the print format
New
Added the ability to multiply the result by a specified annotative scale
Fix
Vector and raster processing were swapped places. Fixed by
Improved
Index of the Title Block added to the pdf file name when printing several Title Blocks from one sheet is added to the end of the file name
Fix
Correct sorting of sheets
New
Added launch setup
Fix
Fixed bug of incorrect determination of the size of the Title Block in some files
Fix
Fixed a bug in processing Workshared files
Fix
Fixed a bug that would cancel the export process by pressing the "No" button
Fix
Fixed "Folder not empty" error when merging pdf files
New
Using print sets to select sheets
New
Creating subfolders in an export folder
New
Merging pdf files
New
Print from multiple open files
New
Print from linked files
New
Printing in pdfs along the outline of the Title Block
New
Print to multiple pdf files from a single sheet (along the outline of the Title Blocks)
New
Monochrome pdf printing with color exclusion
New
Selecting colors for each sheet
Improved
Do not close Views that were open before starting the export
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
Added possibility to copy parameter values from rooms to created floors
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Fixed an error that in some cases the reinforcement contour was built outward instead of inward of the slab
New
Added possibility to display properties for objects of several types from selected objects
Fix
Fixed an error that incorrectly calculated the thickening distance in fractions
Improved
Removed "Top of all windows" property from the plugin window
Improved
Added localized display for "Blocks" and "Drawings" groups in the tree
Fix
Corrected colors on the preview of reinforcement openings in the dark design theme
Fix
Corrected colors on the preview of reinforcement openings in the dark design theme
Fix
Fixed an issue where fractional numbers did not output zero after a dot (comma)
New
Straight axis: added block rotation accounting when rotating text (disabled in settings)
New
Added a text alignment grip for all smart objects with two lines of text
Fix
Straight axis: fixed an error which caused text to shift when specifying a rotation angle
Fix
Nodal leader and Secant nodal leader: correct text positioning when mirroring
Fix
Fixed a bug when trying to clear room parameters when the "Use system parameter Number" option is enabled
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Ignoring some errors in the parameter copying command
Fix
Fixed the error of displaying the delete parameter button in composite copying rules after loading a saved configuration
Improved
Authorization in the personal account after loading plugins
Improved
Added a link to the company on LinkedIn
New
Added a button to go to the plugin page in the new plugins installation window
Improved
Removed restart with administrator rights
Improved
Added removal of the EPPlus.dll library to the cleaning application
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Version of dwg file with tables was lowered
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Fixed an error saving user configurations
Fix
Fixed a bug that prevented rebars from being processed in some sections
Improved
Removed spaces trim of arguments when processing IF, FIRSTTRUE, LSTR, RSTR, SSTR arguments
Improved
Using the average geometric centroid of composite solids in cases when it was not possible to obtain the centroid of a combined solid
Improved
Set the current text style of the document, if the text style is not set from the style of the smart object
Fix
Fix some bugs
New
Added an option to set the coloring area - lines or surfaces
New
Added ability to drag and drop conditions in the list
New
Added ability to duplicate configuration
New
Added an option to disable the setting of a Shaded Visual Style for the View when creating view filters
New
Added the ability to set the name of the view filter in the standard conditions
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Added remembering of the selected configuration
Improved
In the condition by parameters, when getting the parameter values, the colors of already existing values are not replaced
Improved
Added "Views" category (OST_Viewers) to the category list of the element filter by category
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
Added new smart object "Chain leader"
New
Added double-click editing window for the "Weld joint" smart object
Improved
Updating smart object graphics in a model when using the REGEN command
Fix
Fixed an error which caused the grips of the "Level mark" smart object to be displayed incorrectly
Fix
Fixed an error which caused the text background to be incorrectly displayed on the left side of the "Level mark" smart object
Fix
Changes in the formula processing algorithm
Fix
Fixed a bug where some sheets could be skipped when collecting data from model space
Fix
Fixed fatal error when changing insertion variant in AutoCAD 2013
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
Separator (dot or comma) specified in the initial value is taken into account when setting string parameters
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Fix the "Update worksets" command launching error
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Added an option to choose an action after importing a table (to open or not to open the view) to the settings
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Fixed a bug where notes were added in reverse order when adding to existing text
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file
Fix
Fixed an error that processed columns that were not checked in the group
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file
Fix
Fixed an error that processed beams that were not checked in the group
Improved
Changed icons
Fix
Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file
Improved
Improved algorithm for finding openings
Fix
Setting default values for rebar diameters in case zero diameter is stored in the default configuration storage file
Improved
Do not display the "Open Configurator" menu item if a blocking application is open
Fix
Fixed incorrect operation of the MAX function
Fix
Fixed error in processing MIN and MAX functions
Improved
Ignoring empty "find" values when searching and replacing
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Ignoring empty "find" values when searching and replacing
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
Added ability to duplicate configurations and rules
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Changes were made to the algorithm for determining the location of families in space
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Fixed an error in filling the list of steps for transversal stirrups when entering a step of the main reinforcement that is not a multiple of 25 mm
Improved
Removing unnecessary entries from the Revit addin file
New
Removed plugin loading through manifest file
Improved
Changed icons
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Fixed a pipe processing bug
Fix
Fixed apartment unlocking bug
Improved
Added command access settings on the ribbon
Fix
Fix some bugs
New
Redesigned UI
New
Reworked the algorithm for creating wall layouts by rooms
New
Added ability to specify a name for the layout
New
Added possibility to process multiple selected rooms
New
Added possibility to select rooms in active view
New
Added an option to use the filter by parameters for rooms in the active view mode
New
Added saving of a selected template and sheet
New
Added the ability to specify how to apply a workset - to instances and/or types - for link files
New
Added Space processing
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
Added settings window (instead of prompts in the command line)
New
Added settings window (instead of prompts in the command line)
Improved
Plugin availability on all plans
New
Added "By active view" mode
Improved
Added accounting of linked files in the basic check of the availability of buttons on the ribbon
Improved
Ignoring some errors
New
Some GOSTs have been updated
New
Added tables: GOST 21.508-2020 form 6, GOST 21.501-2018 form 9
Improved
Changed tables: GOST 21.608-2021 form 1, GOST 21.608-2021 form 3, GOST 21.501-2018 form 1, GOST 21.502-2016 forms 1 and 2, GOST 21.110-2013 form 1, GOST 2.106-96 form 6, GOST 21.602-2003 forms 1 and 4
Improved
Removed change of text height in the headings of inserted tables
Improved
Added processing of pipe fittings
Improved
Added error description when creating elbow fittings
Fix
Fixed some errors in cable tray processing
Improved
Added command access settings on the ribbon
Fix
Fix some bugs
Improved
Removed volume check for Solids for Rooms and Spaces
New
Added the ability to apply worksets to elements on the active view
New
Added the ability to specify how to apply a workset - to instances and/or types - for groups
New
Added the ability to Pin/Unpin elements in selected worksets in the “Workset Processing” command
Improved
Changed icons
Improved
Renamed the configuration storage file
Fix
Fixed an issue where some categories were not displayed in the element filter by category
Improved
Added the ability to display categories of a certain type in the element filter by category
Improved
By default, categories whose names begin with "<" are excluded from the element filter by category
Improved
Changed icons
Improved
New auxiliary methods added
Fix
Fixed some bugs
Fix
Fixed an error that didn't show an icon on the ribbon
Improved
Changed icons
Fix
Fixed an error that could delete views placed on sheets when selecting the "Delete all views without references" option
New
New auxiliary tools used by plugins have been added
New
Added floor processing
Improved
Repeated attempt to set the value of a numeric parameter with a comma replaced by a dot, in case the value with a comma was not set
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Repeated attempt to set the value of a numeric parameter with a comma replaced by a dot, in case the value with a comma was not set
New
Added dimension processing in families
New
Removed plugin loading through manifest file
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Returns the correct values of dimensions enclosed in brackets when returning data for drawing
New
Removed plugin loading through manifest file
New
Added ability to use the plugin in the family editor
Fix
Changed icons
Fix
Added command access settings on the ribbon
New
Added ability to use the plugin in the family editor
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
Removed plugin loading through manifest file
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
New features have been added to the element filter, which will be used in plugin development
Improved
A warning icon has been added to the "Autosave" tab in the settings window if the backup storage folder has been deleted or renamed
New
New functions added: SMIRRORED, TMIRRORED, LSTR, RSTR, SSTR
New
Added processing of the "Stair Railings" category
Improved
Added category sorting in settings
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Custom categories are excluded from the list of available categories in the category filter
New
Added an option to disable number rounding and set the number of decimal places when rounding
New
Added display of the total value of the property
New
Removed plugin loading through manifest file
Improved
Icons changed
Improved
The algorithm for determining the room boundary has been amended to take into account cases where the original boundary contains segments that are less than 1 foot long
Improved
Changed icons
Improved
Added command access settings on the ribbon
Improved
Pictures updated
Fix
Fixed an error that didn't detect a traversed element
Fix
The "Connection already exists" error was fixed in the "Connect straight" command
New
Added ability to process only Grids
Improved
Changed settings storage scheme
Improved
Changed icons
Improved
Added command access settings on the ribbon
New
Added "Connect fittings" command
New
Added "Connect straight" command
Improved
Connect diffusers: creating a tap or tee connection based on the routing settings of the selected duct type.
Improved
Connect diffusers: Consideration of the vertical section length when creating a flexible duct
Improved
Changed icons
Improved
Added command access settings on the ribbon
Fix
Fixed defining of displacement direction for a piece of bendable element
Improved
Improved methods of building tabs on the ribbon
Improved
Added possibility to insert GUID of shared parameter or system name of built-in parameter in formula editor
Improved
Added command access settings on the ribbon
Improved
Changed icons
New
In the filter of elements by parameters added the possibility to select from a list of parameters not only the name but also the GUID of the parameter or the system name of the parameter
New
Added option "For linear MEP elements create by axis"
Improved
Added command access settings on the ribbon
Improved
Icons changed
Fix
Fixed "The ElementId levelId is not a Level" error when creating ducts in Revit 2022 and older
Improved
Ignoring Revit manifest file access errors
New
Added the ability to use an instance/type ID as a parameter value
New
Added the ability to use an instance/type ID as a parameter value
Improved
Ignoring Revit manifest file access errors
Fix
Changing Host for a rebar in a group or assembly when using the "Copy to Host" command
Improved
Added special case processing to the SolidTouch algorithm
Improved
Removed the message from the command line that the ModPlus tab was not found, which appeared when loading the plugin before building a tab on the ribbon
Fix
Corrected errors in the doc template for the "ЭОМ" section
Fix
Corrected errors in the doc template for the "ЭОМ" section
New
New auxiliary tools used by plugins have been added
New
New auxiliary tools used by plugins have been added
Fix
Corrected errors in the doc template for the "TH" section
New
By changing the "Type Name" parameter, the name of the type is changed
Improved
Added processing of Legends
New
Added support for Organization Settings
Improved
Changes have been made to the algorithm for determining relationships between elements, taking into account that instances of families can also be the Hosts
New
Added possibility to set an offset from the Floor thickness
New
Added ability to move configurations in the list
New
Added processing of Curtain Walls
Improved
Improved the algorithm for creating floor leads in doorways, taking into account openings placed on the wall end and balcony blocks
Fix
Fixed "The referenced object is not valid, possibly because it has been deleted from the database, or its creation was undone" in Revit 2019
New
Added support for Organization Settings
New
Added copying variant "From group to children"
New
Added button to open configuration storage folder
New
Target parameter prefix and suffix added to all types of copy rules
New
Rounding the result before writing to the target parameter added to all types of copy rules
Improved
Ignoring the warning about the repeated value of the "Mark" parameter
Improved
Prohibited running the plugin in the family editor and on some views
Fix
Fixed some bugs in the window design
New
Added new command "Lines length"
New
Added "Equipment" category to the Hide/Show command
New
Added support for Organization Settings
New
Added ability to expand a settings group to the full width of the window
New
Added ability to pick elements or select by rectangle
New
Added ability to process previously selected elements
New
Added ability to edit configuration name and description
New
Added ability to duplicate configuration
New
Added ability to export and import configurations
Improved
Added filters for element selection
Fix
Fixed a bug where searching for the same elevation marks didn't work correctly, leading to deletion of all created elevation marks
Improved
Message output in case of an attempt to set a value for a parameter with "Read-only" property when numbering in the Schedule
Improved
Improved algorithm for processing functions whose arguments are separated by a comma, taking into account that parameter values can also have a comma
Improved
On-the-fly search replaced by button search
Fix
Fixed a critical error that occurs when drawing a smart object "Straight axis"
New
Added new smart object "Level marker on the plan"
New
Added move batch numbering
Improved
Added an explanation why move numbering is unavailable
New
Added "Point Clouds" category to the Hide/Show command
Improved
Categories added to the Hide/Show Reinforcement command: Structural fabric Reinforcement, Structural Fabric Areas, Structural Area Reinforcement Symbols, Structural Path Reinforcement Symbols, Structural Fabric Reinforcement Symbols, Structural Area Reinforcement Tags, Structural Path Reinforcement Tags, Structural Fabric Reinforcement Tags
Fix
Fixed a bug that sometimes occurred when analyzing doors on the end of a wall
New
Added possibility to change values of parameters of "Material" type
New
Added ability to lock apartments from repeated collection
New
Added ability to perform numbering of apartments by curve
New
Added possibility to use system parameter "Number" for numbering rooms
Improved
The maximum Finish thickness in the room matrix has been increased to 200 mm
Fix
Fixed an bug that caused project parameters not to be deleted
New
Added "Project Parameters" tab
Improved
Added a check for using a parameter in the Project Information
Improved
Defining conditions that reconcile numerical values, followed by reading the numerical values of the parameters in the IF, AND, OR functions
Improved
Taking into account cases where the target parameter is displayed several times in the schedule, which leads to double numbering
New
Added the ability to disable object snapping when specifying points
New
Added processing of the "Roofs" category
Improved
Redesigned configuration storage system
Fix
Fixed apartment calculation error in Revit 2020
Improved
Improved formula processing algorithm
Fix
Fixed the formula editor launching error
Fix
Fixed an error that occurs when working in the sheet schedule
New
Added ability to hide preview in formula editor
New
Added ability to duplicate fields in formula editor
Improved
Added removal of spaces at conditional expression arguments
New
Added possibility to change the "Type" parameter value
Improved
Added an option to move fields in the formula editor
Fix
Fixed an issue where the presence of fields in the list of favorites was not detected
Fix
Fixed an issue where field keys could be written to a parameter
New
Added modifying functions TOUPPER, TOLOWER
Improved
Added handling of two quotation marks ("") indicating empty value
New
Fields added to formula editor
New
Added RoomBoundaries strategy
New
Added ConnectionSubElements strategy
Improved
Taking into account the inner contours of the room when calculating area
Improved
Material processing in schedules
Improved
Coloring parameters with different colors in the preview in the formula editor
Fix
Fix some bugs
Fix
Fixed an error which caused incorrect loading of filters by parameters with a symbol with two characters
Fix
Fixed an bug that prevented functions written in lowercase from being detected
Improved
Added check of possibility to use conditionally source element parameters in formula depending on the type of parent strategy
Fix
Fixed an error of formula prevalidation that occurs when there is HAS() in a formula
Fix
Fixed an error that did not set values in parameters with the data type "Integer"
New
Added search and replace in the sheet name by analogy with search and replace in the sheet number
Fix
Fixed an error that occurs when numbering in schedules that contain analytics elements
Improved
Displaying schedules as in the Project Browser
New
Added processing of schedules
New
Added ability to set multiple values to search and replace in view name and schedule name
New
Added ability to set multiple values for search and replace in sheet number, view name and schedule name
New
Added the ability to process elements that are in the Structural Connections, when numbering in the schedules
New
Added possibility to set the prefix and suffix by element parameter
New
Added possibility to specify a numbering step
New
Added possibility to use fractional values for numbering
Improved
Using a category and/or parameter filter for numbering on a view
Improved
Redesigned plugin windows
Improved
Added ability to stretch the settings window when numbering in the view
Improved
Saving plugin settings in a separate file
Improved
Removed Revit 2017 support
Fix
Replacing the comma with a point when obtaining numeric parameter values
New
Added export to PDF and OpenXPS
New
Added sheet search in the list
Improved
Removed sheet selection inversion button
New
Added notification of expiring licenses
Fix
Fixed an issue with AND, OR functions always converting parameters to numbers
Fix
Fixed an error which caused incorrect processing of formulas containing several curly brackets
Fix
Added accounting for repeating sheet numbers in a group when using simple numbering with the "Start numbering from the selected sheet in the group" option enabled
New
Added possibility to use GUID of shared parameter or system identifier of built-in parameter in elements filter by parameters
New
Added parameter search in the parameter selection control
Improved
Skipping hidden entities when searching for similar entities
New
Added new smart object "View"
Improved
Added a grip to change the type of frame in the Nodal leader
Improved
Added the ability to change the level mark in the Level mark edit window
Improved
Added text mirroring when mirroring a Level mark, Axis, and Fragment marker
Improved
In the Parameter Filter added ability to sort items by dragging and dropping
Improved
Handling cases where dimension segments get the wrong order, leading to the text being moved out in the opposite direction
Improved
Selection of the signal parameter, taking into account that the parameter can be used in the sorting of the schedule
New
Added a new "Manage" item to the Switchable Menu options for Revit
Improved
Renamed the "ASM" switchable menu item to "Disciplines". Renamed "General" switchable menu item to "Design"
Improved
Resetting selections in the parameter list in the parameter selection control
New
Added icons of supported products in the new plugins installation window
New
In the new plugins installation window added possibility to check "Do not remind anymore" for all plugins
New
Added search in "Components" window
Improved
Added sorting plugins by name in "Components" window
Improved
Plugins with the same version but different product version are displayed in one line in "Components" window
New
Updated document templates to reflect changes made by Russian Government Decree № 963 from 27.05.2022
Fix
Fixed "Method not found" error
New
Added a text width factor to take into account when calculating the width of dimensional text and determining whether text offsets are necessary
New
Added "Slab Edges" category to the category list on the "Join" tab
New
Added " Slab Edges " and "Structural Foundations" categories to the category list in the "Cut" tab
Fix
Fixed "Method not found" error
Fix
Returned an auxiliary method that was accidentally deleted during the last update
Improved
Service update
New
Added the ability to create "Starts with" and "Ends with" conditions in the parameter filter
Improved
In the parameter filter, redesigned the parameter selection popup dialog to take into account that there may be a large list of categories
Improved
Added alphabetical sorting of categories in the category filter
Fix
Autosave service now specifies correct creation/editing date for .os$ files
New
Added possibility to lead the floor contour into the door openings by the whole width of the wall, or by a specified value
Improved
Improved algorithms for the analysis and processing of openings
Fix
Fixed an error that the list of Floor type was not filled in when restarting
New
Added safe command calls that exclude closed Revit commands in case of unexpected errors
Improved
Changed methods for reading numeric parameters in versions 2017-2020
New
Added possibility to process selected and preselected Rooms
Improved
The plugin work is not interrupted now when an error occurs while processing a Room boundary
Fix
Fixed an error that the list of types did not change when running the plugin in different documents
Improved
Processing arc room separators
Fix
Fixed a bug that prevented creating filters in a view without a template
Fix
Fixed text replacement algorithm not working correctly when "Contains" option is on, if search string contains dot or other special Regex characters
Fix
Additional check of the ability to change the visibility of a category in the hide/show all categories in the view commands
Improved
The option "Show First, Last and Middle Rebar in Rebar Set" was added to the "Presentation" command
New
Added "Presentation" command
Improved
Added copying the values of all string parameters from the original set to the newly created ones in the "Explode set" and "Split set" commands
Improved
Added copying of groups or assemblies in the "Copy to Host" command if the rebar is in a group or assembly
Improved
Increased maximal value of parameters in complex copy rules from 20 to 50
Fix
Fixed the error of transferring backups with the auto-save service
Fix
Autosave service fixed a bug that caused files with names ending with 4 digits to be treated as backups
Fix
Rolling back the latest changes
Fix
Fixed a bug where rod directions were incorrectly set when creating a background reinforcement as "Area Reinforcement " with the "Each direction in each mesh" option
New
Added copying of graphics/visibility override settings in case the same filter is copied between different views
Improved
Displaying view names along with their type
Improved
Added remembering the value of "Views/View Templates" option
Improved
Added a quick search for the current view in the list of target views
Fix
Fixed a bug where the "Check all", "Uncheck all", "Collapse all" and "Expand all" buttons did not take into account the search results (processed hidden views/templates)
Fix
Fixed a bug that didn't take into account the name of the copy specified in the view tree
New
Added the ability to enter longitudinal rebars in perpendicular beams
New
Added new auxiliary methods used in various plugins
Fix
Fixed a critical error related to retrieving elements from linked files
Fix
Fixed a bug where integer parameters were not displayed in the parameter list in Revit versions 2022 and higher
Improved
Removed item tree virtualization
Improved
The "Expand All" button now expands elements only to the second nesting level
Fix
Correct display of "Length" properties
Improved
Switching to a saved menu item after the ribbon is fully loaded
New
Added a new command "Zoom selected"
Improved
Added the ability to hide/show all categories in the view in the Show/Hide commands
Improved
Refinement of copying the isolation of engineering elements in the "Properties copy" command
Fix
Fixed some bugs
Improved
Added new auxiliary methods used in various plugins
Fix
Fixed fatal error when deleting configurations in the "Basic cleaning" tab
Improved
Optimized parameter lists when there are a large number of parameters
Improved
Added missing sorting in some lists
Improved
Displaying cell read errors after the whole Excel worksheet has been processed
Fix
Fixed an error that occurs in some cases when reading cells with formulas
Fix
Fixed a bug that occurs when processing a compound arithmetic rule if a comma is used as a delimiter of integer and fractional parts when displaying parameter values in Revit
New
Added an option to specify an offset at the top and an offset at the bottom
Improved
Removed "Only sections and elevations" filtering for templates of the view
Improved
Some functionality improvements for future plugins
Improved
Removed automatic type substitution in the "Fix family types duplicates" tab
Fix
Fixed a bug that created an additional L-shaped rod, bent into the slab and placed in the extreme walls, when the option was disabled
Improved
Small changes to the plugin window design
Fix
Fixed an error that incorrectly calculated the height of columns at medium detail level, leading to an error in the creation of transverse reinforcement
Improved
Improved algorithm for determining cell width
Fix
Fixed an error reading the contents of some cells
Fix
Fixed an error that incorrectly changed the availability property for some checkboxes in the plugin window
Fix
Fixed an error that incorrectly changed the availability property for some checkboxes in the plugin window
New
Added "Walls", " Floors" categories to the list of categories in the "Cut" tab
New
Added ability to swap filters by category and filters by parameters
Fix
The "Cut" tab has been removed unnecessary buttons
Improved
Minor improvements to the category and parameter filter
Improved
Increased client timeout when sending requests to the web server
New
Removed working with ProgramData folder when working with Revit addin files
New
Removed working with ProgramData folder when working with Revit addin files
Improved
Minor improvements to the code
New
Added ability to create an offset from the wall
New
Added ability to process surrounding structures that are in a linked file
New
Added ability to process rooms from a linked file
New
Added the ability to add a prefix/suffix to the names of created views
Fix
Fixed some bugs
Improved
Treatment of openings in walls that do not directly surround the room
New
Added a prefix to the source parameters in the composite copy rule
Improved
Increased maximal value of parameters in complex copy rules from 10 to 20
Improved
Use of parameter names in the preview line of a composite copy rule
Improved
Copying pipe insulation with the copy element properties command
New
Replacement of the main library for reading Excel files
New
Added ability to delete a table without deleting the drafting view
Improved
Algorithm for finding intersections with unselected walls has been amended
Improved
Changes in the numbering algorithm
Fix
Fixed the error of starting the filter if there are no open documents
New
Using the "Elements filter" tool to filter elements
New
Added "Only parallel walls " option to the "Join" tab
New
Added OST_StructConnections category
Fix
Fixed saving of wall reinforcement settings
Fix
Fixed ModPlus re-registration bug for all Revit versions
New
Copying parameter values with preserving the link with global parameters
Improved
Displaying view templates in alphabetical order
Improved
Saving prefix values, suffix values, search and replacement values, and the selected view template
Improved
Displaying view templates in alphabetical order
Improved
Saving prefix values, suffix values, search and replacement values, and the selected view template
New
Added "Collapse All", " Expand All", "Check All" and "Uncheck All" commands
Improved
Improved some table styles
New
Removed restriction on working on plans only
New
Added level grouping of walls and intersections
New
Added an option to create joints from the underlying slab by additional vertical rods of the background reinforcement
New
Added ability to create bent (bottle-shaped) vertical wall joints
New
Added ability to create vertical wall joints with additional U-shaped rods
New
Added ability to alternate sides when creating straight outlets of different lengths
New
Added ability to create additional L-rods bent into the slab when creating straight joints in the outermost walls
Improved
Removed restriction on the step of vertical bars of background reinforcement depending on the wall thickness in the group
Improved
Redesign of the vertical joints settings - displaying only those properties that apply to the selected joints type
Improved
Added the "do not create joints" option to the "If there is no slab, then" property in the vertical wall joints settings
Improved
The minimum allowable distance between background reinforcement bars has been reduced to 10 mm. The message about the minimum tolerance of 50 mm for vertical bars and 25 mm for horizontal bars is displayed when the tolerance is violated
Improved
Added the possibility to create U-shaped rods and stirrups at the same time in the framing of holes
Improved
Creation of U-shaped rods and stirrups in the framing of holes with the layout in the same direction on opposite sides of the opening
Fix
Fixed an error of rebar type copying when copying reinforcement settings between groups
Fix
Fixed an error in assigning values to system reinforcement parameters
Fix
Fixed an error that occurred when trying to create U-shaped bars along the vertical in openings that do not have one vertical edge
Fix
Fixed an error leading in some cases to duplication of straight joints from the underlying slab in the area of intersections
Fix
Corrected an error that horizontal U-shaped bars of the framing of openings did not move relative to the horizontal bars of the background reinforcement
Improved
Disabled the option to close the plugin window by pressing Esc
Improved
Disabled the option to close the plugin window by pressing Esc
New
Adding attributes to all block inserts (without values) when adding attributes for a specification
Fix
Fixed bug that files with brackets in their names were not processed when backups were moved by autosave service
Fix
Fixed a critical error in displacement numbering that would cause a fatal error in Revit
Fix
Fixed an issue where file names with a number separated by a dot at the end of the name were processed incorrectly when transferring backups using the auto-save service
Improved
For conditions by parameter values, added the ability to set the search area (model or view) when obtaining values
New
Added an option to limit the number of conditions added to the filter by parameters
Fix
Fixed an error in the processing of reference planes
Improved
Added check of element visibility by graphics
Fix
Fixed an error that occurs when trying to process invalid elements
Fix
Fixed copying of views in Revit 2023
Improved
Corrected alignment in the table according to GOST 21.110 form 1
New
Added possibility to use organization settings for the license server
New
Added possibility to use organization settings for the license server
New
Added possibility to use organization settings for the license server
New
Added possibility to use organization settings for the license server
Fix
Fixed an error setting the prefix from a parameter in Revit versions older than 2023
Improved
Changed strategy for rounding numbers that are halfway between the other two
Improved
Added checks of the current view for the possibility to create or change the template
Improved
Displayed information about parameters that cannot be used to create filters
Fix
Fixed some bugs
Fix
Fixed some errors when reading an organization configuration file
Fix
Fixed an issue where the header of the "Add parameter" button could not be displayed
New
Added "Workset Processing" command
New
Added the ability to set a common configuration file for an organization (Beta test)
New
Added group conditions to the parameter filter
Fix
Fixed a bug that prevented the right search from working
New
Removed option to copy the values of the type parameters
Improved
The description of the checkboxes is moved from the tooltips to the plugin window
Improved
Added dropdown lists for specifying replacement types
Improved
Correct handling of parameters of families that are proxy elements of nested family types
Improved
Added visibility check for instances of linked files in the view
Improved
Different links to the Telegram group depending on the language of the app
Fix
Fixed a bug that caused categories not to be displayed in the selection dialog in the filters by category
New
From the Show/Hide command removed the categories of the analytical model and added categories: mass, ducts, flexible ducts, pipes, wires, cable trays, conduits
New
The list of uninstallable plugins has been expanded for the cleaning auxiliary application
Fix
Added missing IsVisible property to RevitBuiltInCategory type
Improved
Forced redrawing of smart objects when switching to a layout without forced layout regeneration
Fix
Fixed a numbering error in schedules that occurs when a schedule has a field that combines several parameters, one of which is the target numbering parameter
Improved
Setting the Revit window as the parent window for the results window
Improved
Added check that elements are not hidden
New
Added export/import list of configurations
Fix
Construction of a sketch of rectangular tied stirrups in the opposite direction
Fix
Fixed duplication of some properties when duplicating filters by parameters
New
Added ability to create tied stirrups in the framing of holes
Fix
Fixed an error of rebar type copying when copying reinforcement settings between groups
Fix
Fixed an error of value allocation to system parameters of a reinforcement
Fix
Creation of area-based reinforcement with arc segments in a contour is fixed
Fix
Fixed an error that did not apply corrections to rebar bend diameters
Improved
Added forced regeneration when switching to a layout if there are smart objects on the layout
Improved
Returned the algorithm for finding unused Shared Parameters, which requires opening families
Improved
Forced redrawing of smart objects when switching to a layout
Improved
The plugin window is made non-modal (does not block the Revit window)
New
Rewritten the algorithm for finding unused shared parameters
New
In the list of shared project parameters added ability to find in which families or schedules parameter is used
Improved
Removed obtaining of project shared parameters when loading the plugin
Improved
Fixed closing of the plugin window when deleting view templates
Improved
Using reserve service addresses in case it was not possible to get service addresses from the site
Improved
Using reserve service addresses in case it was not possible to get service addresses from the site
Improved
Coloring of projection and section lines
New
Added the ability to search among the selected elements
Improved
Added the ability to replace with an empty value
Fix
Fixed the error of displaying quotes in search results
New
Correct creation of filters, taking into account the type of parameter data
Improved
Checking of real numbers by displayed parameter value was added in the parameter filter
Fix
Fixed an error in the parameter filter checking of real numbers if a comma is used in the operating system as a fractional part delimiter
New
Added the possibility to add additional numbering to the sheet name
New
Added an option to open the schedule from the "Information about search results" window
Fix
In the parameters filter, the display of parameters whose name contains _ was fixed.
Improved
Optimized search in the category list in the category filter
Fix
Fixed an error checking the uniqueness of names of created filters
Fix
Fixed an issue with reading text parameter values in Revit versions older than 2023
Fix
Fixed an issue with creating filters based on parameters with non-specified values
Fix
In the auxiliary method of dimensional processing, an error that occurs when processing dimensions created by the end points of pipes or ducts has been fixed
New
Added the ability to reset (delete) the values of numeric properties
Improved
Display an empty text field if the numeric parameter has no value
New
Added merging of duplicate layers
New
Added condition "By parameter values"
New
Added possibility to use numeric comparisons (more, less, more or equal, less or equal) for string parameters in element filter by parameters
Improved
Building a menu from a local file if there is no access to the Internet
New
Building a menu from a local file if there is no access to the Internet
Improved
Added window with progress display
Improved
Added auxiliary methods required for developing new plugins
Improved
Optimizing search and filtering
Fix
Fixed an issue where the connection to the web license server was not disconnected after pressing the "Disconnect connection" button in the settings window
Fix
Fixed an issue where the connection to the web license server was not disconnected after pressing the "Disconnect connection" button in the settings window
Fix
Fixed an issue where the connection to the web license server was not disconnected after pressing the "Disconnect connection" button in the settings window
Improved
Edits were made to the methods of reconstructing openings and connecting the created parallel walls, taking into account cases where the original wall has a curtain wall that completely cuts the wall
Improved
Opening the views selected in the Project Browser in alphabetical order
Fix
Fixed "Process linked files" checkbox error when opening settings window
New
Added processing of objects in assemblies
New
Added auxiliary method to search for an object in assemblies
Improved
Duplicate styles with name change when matching
Improved
Minor code improvements
New
Added possibility to set options of parameters pre-clearing
New
Added possibility to set the filling order for "Room index" parameter
New
Added possibility to set filling rules for "Apartment tag" parameter
Improved
Change the focus on the work set name input field when adding a work set to a group
Improved
Creating a new work set in the group by pressing Enter in the work set name entry field
Improved
Improved algorithm for determining the side of the room, taking into account the rotation of the building
New
In the filter by parameters added ability to select parameters from the list, if in the filter by category are specified categories
Improved
Optimize the display of the category list in the category filter
Fix
Fixed the error of filtering elements if the filter has no conditions
New
Added ability to hide or isolate search results
Improved
Correct display of the plugin window - on top of the Renga window, but not on top of other application windows
New
Added accounting of enclosing structures from linked files
Improved
Added possibility to specify in which sheets to write the count of sheets in the group - in all or in the first one
Improved
Taking into account the scale when drawing the ground line and waterproofing
New
Added the possibility to add a prefix and/or suffix from the sheet parameter to the sheet number, as well as to write the number of sheets in the group to the specified parameter
Fix
Use a simple variant of determining the length of the text, if it was not possible to measure the length of the characters of the font
Fix
Fixed bug in processing files that do not contain the common part in the name
Improved
Expanded the list of categories in the category filter
New
Batch settings backup
New
Added the ability to open the menu by left-clicking
New
New auxiliary methods added for use in plugins
Improved
Record the side of the world without the "+" sign for corner rooms
Improved
Made some improvements to the code
Fix
Fixed an error when not all reinforcement was processed in the Area Reinforcement with sections of different lengths
Improved
Processing of nested families of all levels
New
Added option to copy from parent family to nested families
New
Added composite arithmetic copying rule
New
Added option to remove initial parameter name patterns from composite rules
New
Added preview of results in composite rules
New
Added an option to select an element from a linked file as a source element for the variant of copying from one element to several elements
Improved
Redesigned composite rules with an option of specifying any delimiter
Improved
Removed the "Over windows" property
Improved
Using the displayed value of numerical parameters at direct copying
Fix
Fixed an issue where icons were not displayed on the parameter search option button by name
Improved
Consideration of the base point rotation
Fix
Fixed a bug with access to the input field of the room parameter when there are no saved settings
Fix
Taking into account the absence of a category of elements when searching for related elements
Fix
Display subitems when a checkmark is placed on an item in the search result
Improved
Added column sorting in tabular data
Fix
Исправлена ошибка, при которой выводилось лишнее слово «TEXT» при открытии параметров в текстовом документе
New
Added ability to override the original category list in the element filter by category used in various plugins
New
Added a match type - all conditions or any condition - to the element filter by parameters used in various plugins
New
Added " Update worksets" command
Improved
Added an option to disable the id of elements that are assigned to a workset
Improved
The types of links were added to the elements to be processed
Fix
Fixed fatal error when trying to edit filters by category or parameters
New
Added saving of the last opened switched menu
Fix
Fix some bugs
New
A new "Open Views" command has been added
Fix
Fixed plugin startup error
Fix
Fixed plugin startup error
New
Added identification of type parameters
New
Optimizing work with large lists
New
Added "Select All" and " Unselect All" buttons
Improved
Ability to run the plugin in the absence of dwg inserts
New
Added common auxiliary methods used in reinforcement creation plugins
Improved
Improvements have been made to the method of removing unused elements
Improved
Service update due to the transfer of some functionality to the working libraries
Improved
Service update due to the transfer of some functionality to the working libraries
Improved
Improvements have been made to the auxiliary controls
New
Added a window element for editing filters by categories and parameters, used in some plugins
Improved
Displaying information about apartments that have one or more rooms with a blank "Room type" parameter in the list of area calculation results
New
Added sorting of processed files in alphabetical order
New
Added algorithm for removing a viewport that has the same size as the title block, if there are no entities in the source file model
Fix
Fixed an error that occurs when processing a dimension that points to the centerline of a linear element
Fix
Fixed an error that occurs when processing a dimension that points to the centerline of a linear element
Fix
Fixed a bug in the service of removing null segments from the dimensional chain that occurs when processing a dimension pointing to the centerline of a linear element
Improved
Added removal of the "Sheets export" plugin for Revit to the cleaning auxiliary application
Fix
Fixed a bug that occurs when searching for dependent elements if it was not possible to get a correct outline of a beam
Fix
Fixed a bug that occurs when searching for dependent elements if it was not possible to get a correct outline of a column
Improved
Edits were made to the construction of the conditional line of intersection
Improved
Added processing of extreme lines in families, if no extreme edges are found
Fix
Fixed "eKeyNotFound" error that could occur when inserting signatures
Fix
Fixed the inclusion of the product identification icon
New
New auxiliary methods used in plugin development have been added
New
Possibility to export, import and copy settings of reinforcement with data about the number and position of longitudinal reinforcement and with the layout scheme of the transverse reinforcement was added
New
Possibility to set straight, C-shaped and S-shaped shapes of transverse reinforcement along the outermost bars of the longitudinal reinforcement has been added
Improved
The ability to specify a fractional value for the thickness of the working reinforcement cover has been added
Fix
A bug was fixed in the search for related elements from linked files in the case when a link instance has different insertion coordinates than the original one
Fix
Fixed an issue where rebar bending radii could not be corrected in some cases
Fix
Fixed an error that occurred when copying rebar type between rebar groups
New
Added an ability to place couplers when creating straight joints of longitudinal reinforcement in columns with the same cross-section
New
Added ability to bend straight bars of longitudinal reinforcement "in a bottle" at the bottom if there are straight joints from the underlying column
New
Possibility to export, import and copy settings of reinforcement with data about the number and position of longitudinal reinforcement and with the layout scheme of the transverse reinforcement was added
New
Possibility to set straight, C-shaped and S-shaped shapes of transverse reinforcement along the outermost bars of the longitudinal reinforcement has been added
Improved
The ability to specify a fractional value for the thickness of the working reinforcement cover has been added
Fix
A bug was fixed in the search for related elements from linked files in the case when a link instance has different insertion coordinates than the original one
Fix
Fixed an issue where rebar bending radii could not be corrected in some cases
Fix
Fixed an error creating L-shaped joints from circular columns
Fix
Fixed an error that occurred when copying rebar type between rebar groups
Fix
Fixed errors that occurred when creating spiral reinforcements for circular columns
New
Added possibility to specify what types of documents - projects and/or families - should be processed in the autosave service
Improved
Improved algorithm for determining the length of dimensional text
Improved
Added accounting for dimensional text override
New
The "Data Devices" category has been added to the list of categories on the "Cut" tab
New
Added progress dialog with cancellation option
Improved
Added warning ignoring
Fix
Fixed some bugs
Fix
Fixed a bug in getting walls from rooms that are surrounded by more than just walls
New
Added possibility to set the offset from the axis
Fix
Fixed an error occurring when numbering a parameter of type
Improved
Some improvements have been made to the algorithm for creating a contour for area reinforcement
Improved
Made some improvements to the code
Improved
The command that deletes zero dimension segments has been added to delete zero dimensions consisting of one segment
New
Added possibility to disable the service without changing the list of hidden tabs in the Hide Tabs command
Improved
Hiding tabs service works when switching documents
Fix
Exclusion of curtain walls when searching for walls above the wall to be treated
New
Checking and connecting ModPlus to new supported products installed after ModPlus
Fix
Fixed an error in Uninstaller.exe that caused the necessary registry entries not to be found
Fix
Correct display of the "Coloring tabs" service status in the settings window when the user did not change the status
New
Added a basic cleanup "Remove all Line Patterns"
New
In the "View templates" tab, you can now open the list of views that have a template assigned to them
Improved
Added retries to download installation files in case of connection errors
Improved
Prohibit selecting entities on a locked layer
Improved
Prohibit selecting entities on a locked layer
Improved
Prohibit selecting entities on a locked layer
Improved
Added ability to copy graphics override between views
New
Added Revit 2023 support
Improved
Loading core ModPlus libraries when no plugins are connected
Fix
Fixed an error in building drop-down buttons if there are nested plugins in the adaptation menu and plugins have several commands
New
Added Revit 2023 support
New
Added Revit 2023 support
New
Reread all properties when one changes (for updating property values ​​with formulas)
New
Added ability to work on all views representing the model
Improved
Service update
Improved
Service update
Improved
Updating dependent libraries
New
Copying the crop extents of plans, taking into account the rotation
Improved
Improvements to the numbering algorithm
New
Added an option to open the folder with the result
Fix
Fixed some bugs that occur when breaking walls by core boundary in Revit versions older than 2022
New
Numbering of selected rows is made through a checkbox
Fix
Added ignoring of materials, which led to the skipping of items during the numbering in the schedule (in the case, when the material fields are added)
Fix
A bug has been fixed, in which all elements in a schedule were numbered with the same value, in cases where sorting parameters were added without headers
Improved
Restore the initial connections of the processed network elements
New
Added ability to copy color schemes
Improved
Ignoring some errors when searching for openings in building envelopes
New
Added ability to automatically install new plugins
New
Added ability to disable progress dialog
New
Added ability to disable result dialog
New
Added AutoCAD 2023 support
New
Added AutoCAD 2023 support
Fix
Fixed the error of displaying groups containing underscores in the sheet tree
Improved
Various improvements have been made to the basic export algorithm
Improved
Improved algorithm for creating a contour for background reinforcement performed by area reinforcement
New
Added basic cleaning configurations
New
Added basic cleanup "Remove all Sheets (except open) with Views on them"
New
Added basic cleanup "Ungroup all groups (without deleting)"
New
Added "Viewport title" search scope
Improved
Edits have been made to search for level marks by the displayed value
Fix
Fixed a bug in the tab visibility management service that caused standard project tabs to be displayed when starting Revit by opening a family file
New
Added "Apartment Editor" tab and work with multilevel apartments
New
Added ability to output parameters to the notepad
Improved
Corrections and typos in the text of the license agreement
Fix
Fixed an error of displaying a picture in the tooltip on the ribbon
New
Added an option to specify the delimiter used in the number when including " Housing ", " Section " and/or parameter value in the number
Fix
Fixed a bug in handling types that have identical layers in Revit 2017-2022
Fix
Fixed the cause of "Provided floor type does not match internal type" error in some files
New
New commands "Graphics copy" and "Properties copy" were added
Fix
Fixed a bug in adding attributes for a specification
Improved
Added ability to turn off the "Regular expression" mode
Fix
Fixed an error that products that do not have table values were not processed
Fix
Fixed an error in defining sorting fields in schedules, where sorting fields have no headers
New
Redesigning core code with support databases with an optimized codebase
New
Removed unused code
New
Removing the "Normative base" plugin for AutoCAD
Fix
Fixed an error splitting rebars with layout type "One"
New
Added multileader processing by the "Text content" property
New
New algorithm for finding floor contours
Fix
Fixed an error in the algorithm for combining closely spaced openings
Improved
The category "Room separators" was added to the list of categories
Improved
The category "Reference planes" was added to the list of categories
New
The plugin window is made non-modal (does not block the Revit window)
New
Replaced result window
Improved
In the result window, added the accounting of errors that occur during a transaction commit
Fix
Fixed a bug that caused element filters not to work with parameters if there were multiple filters
Fix
Fixed error at startup if incorrect path to shared parameters file is specified in settings
New
Added ability to merge apartments
Fix
Fixed a bug that prompted installing plugins marked with "Do not remind" option
New
Added removing of unused groups
New
Added information about availability of shared parameters in current SPF
New
Added option to display unused common parameters in the notepad
Improved
Fewer items in the main cleanup when running in a family
Improved
Safe read and delete shared parameters (continue processing if error occurred)
Fix
Fixed a bug in the SetTabsVisibilityAvailability class that occurs in some cases
New
Added the ability to drag and drop groups of worksets and worksets in groups
Fix
Fixed a numbering error in schedules, in which the "Comments" parameter is used as a filter
Improved
Consideration of the screen scale when converting cell sizes
New
Re-download updates if previously downloaded and uninstalled updates have an out-of-date version
Improved
Additional check for files when checking for uninstalled plugins
Fix
Fixed an bug in wall analysis in a project that lacks reinforcement bar forms
Fix
Corrected the error of determining the L-shape of a reinforcing bar with a large bending radius
Improved
Consideration of the screen scale when converting cell sizes
Fix
Deleting the correct branch in the registry when deleting settings
New
New algorithm for numbering in schedules with "Itemized" unchecked
Fix
Fixed bugs where floor joints were not cut by the wall solid
Fix
Fixed a bug where the dropdown list of parameter selection was not active when there were pre-selected elements
Improved
Added additional check through the openings placed in the curtain walls when collecting apartments (only for elements of the current document)
Improved
New categories were added to the list of host-element categories
Fix
Fixed an error that in some cases did not write area to parameters
New
Rectangular stirrups modeling considering bends on the edge of the working rebar
Improved
In the settings window added the display of working rebar binding to the center
New
Rectangular stirrups modeling considering bends on the edge of the working rebar
Improved
In the settings window added the display of working rebar binding to the center
Improved
Correct offset of the rightmost segment
New
Added possibility to create several named sources
Improved
Improved rounding algorithms when calculating areas
Improved
Autosave service: move the "_backup" folders for linked files that are not located in the folder of the current project
Fix
Corrected the bug with bypassing elements on the left and right sides
Improved
Consideration of end walls and columns that are in contact with the beam and not under it
Improved
Consideration of the transverse walls and columns that divide the beam and are not under it
Improved
Consideration of end walls and columns that are below the top of the beam when determining the bend of joints
Improved
Prohibit export of empty sources
New
Autosave service: move the "_backup" folders for linked files
New
Consider only transversal joints when the "Use geometry without joints" option is enabled
New
Consider only transversal joints when the "Use geometry without joints" option is enabled
New
In the settings of joints from the underlying floors added explanation and the option "Create joints only from the floors in the category "Sructural Foundation"
Improved
For joints from underlying floors, the host is not a column, but a floor
New
New implementation of algorithms
New
Added possibility to specify the offset direction relative to dimensional line
Fix
Fixed a bug that made it impossible to specify a new numbering start value when deleting the old one
New
Added possibility to number selected rows in the schedule
Improved
Added construction of auxiliary detail lines during order selection (only on plans)
Improved
Changed the order of window elements when numbering in views
New
Added service for managing the visibility of tabs on the ribbon
Improved
Tab coloring service: added possibility to set text color
Improved
Autosave service: added possibility to move backup files without enabling autosave
Improved
Autosave service: added move of backup folders when working together
Fix
Fixed an issue where switched menus didn't work when changing the localization language
Fix
Fixed "Cropping view" command startup error
Improved
Cut plan to 3D: using the name of the view "3D - user_name"
New
Added "Cut plan to 3D" command
Improved
Copying detail lines when "Generic annotations" is checked
Fix
Fixed an error that did not change the template of duplicate views
New
Added ability to select and insert multiple notes
New
Added creation of a backup file of user notes
New
The plugin window has been made non-modal (does not block the Revit window)
Improved
Adding notes containing line breaks to existing TextNote
Fix
Fixed a bug that prevented the "Add to existing text" item from working when double-clicking
New
Added ability to select and insert multiple notes
New
Added creation of a backup file of user notes
Improved
Correct window behavior (does not hide behind the AutoCAD window)
Fix
Fixed a bug that prevented the "Add to existing text" item from working when double-clicking
Fix
Do not copy the "Type" parameter value for the title block, if a specific title block is specified and "Copy values of title block parameters" is checked
Fix
Removing unnecessary commas at the end of a line in the text patternt representation
Improved
Search optimization
Improved
Optimizing warning processing
Improved
Copying the workset name when copying from the original "Workset" parameter to the target parameter with a string data type
Improved
Selection of any type of reinforcement for transverse reinforcement
Improved
Selection of any type of reinforcement for transverse reinforcement
Improved
Offset of the grip to add a new vertex at the ends of linear objects
Fix
Fixed "Attempt to modify the model outside of transaction" error when trying to modify rebar bend radius
New
Added registry settings migration
New
Added registry settings migration
Fix
Fixed an error creating straight joints from the underlying slab
Fix
Fixed a bug that caused the creation of stirrups with the wrong height step at certain settings
New
Added copying of viewport parameters
Improved
Added some improvements to the code
Fix
Fixed "Sequence does not contain a corresponding element" error that occurs when breaking by core edges in Revit versions earlier than 2022
New
Added the ability to replace multiple selected blocks
Fix
Fixed plugins loading bug after registry settings migration (or new installation)
Fix
Fixed plugins loading bug after registry settings migration (or new installation)
Fix
Fixed an error comparing objects when reading data from a drawing
Improved
Adjusted data saving paths in the registry
Fix
Fixed a bug in deleting a source wall containing only core layers when breaking by core edges
Fix
Fixed a bug in determining the order of layers for some walls in Revit versions below 2022
Fix
Corrected a bug with incorrect placement of created walls when the default wall line snap is not in the center of the wall
Improved
Service update
New
Added switchable menu
New
New algorithms for local file processing (less data in the registry)
New
New algorithms for local file processing (less data in the registry)
New
New algorithms for local file processing (less data in the registry)
New
Revit switchable menu support
New
New algorithms for local file processing (less data in the registry)
New
Revit switchable menu support
New
Transfer settings in the registry to the Software folder
New
New algorithms for local file processing (less data in the registry)
Fix
Fixed an error in processing non-attached walls
New
Added copying properties of "Top offset " and "Base offset " parameters for walls
Fix
Fixed an error in copying of inserts parameters
Fix
Fixed an error that did not delete auxiliary types
Improved
Optimized (accelerated) search for related elements
Fix
Corrected an error that caused the percentage of reinforcement to not be calculated when changing the number of bars
Improved
Optimized (accelerated) search for related elements
New
Consideration of floors, walls and columns from linked files when searching for relations
Improved
Added element geometry validity check when searching for relations
New
The plugin window is made non-modal (not blocking Revit)
Improved
Added additional check of the linked file document when searching for relations of columns
New
Added options for deleting previously created reinforcement: delete previously created reinforcement of the same type as the one being created; delete all previously created reinforcement; do not delete previously created reinforcement
New
Added the ability to create joints not only from the foundation slab, but also from the underlying floor (provided that there is no column below)
New
Consideration of floor and beams from related files when searching for relationships between columns
Improved
The minimum cross rebars step has been reduced from 100 mm to 25 mm
Fix
Fixed a rounding error when displaying the diameter of circle columns in the preview
Fix
Corrected an error that caused the percentage of reinforcement to not be calculated when changing the number of bars
Fix
Fixed display of spiral shape parameter names in the preferred shapes window
New
Added options for deleting previously created reinforcement: delete previously created reinforcement of the same type as the one being created; delete all previously created reinforcement; do not delete previously created reinforcement
New
A section has been added to the settings that allows you to specify the conditions under which holes of certain sizes will not be selected by default
Fix
Fixed errors in the algorithm for reading data from the created area reinforcement, which led to incorrect creation of end reinforcement and hole framing in inclined slabs
New
Added restore object selection, which is reset when open a plugin window that does not lock AutoCAD
New
Added dynamic calculation of the total length when changing the current selection of elements
New
Added options for deleting previously created reinforcement: delete previously created reinforcement of the same type as the one being created; delete all previously created reinforcement; do not delete previously created reinforcement
New
An option was added to specify a different type (diameter) for vertical rebars created in intersections
New
Added possibility to reinforce openings located at the wall end (that have only one vertical and one horizontal edge)
Fix
When creating straight joints that didn't take into account the overlap, the outlets were created in the openings. Fixed
Fix
On the Reinforcement tab of openings, when hovering over the "U-shaped rebars on top" field in the preview image, the U-shaped rebars on the bottom were highlighted. Fixed
Fix
Fixed a bug in the user's control element of reinforcement diameter, which in some cases did not change the model diameter
Fix
Fixed a bug in the user's control element of reinforcement diameter, which in some cases did not change the model diameter
Fix
Fixed a bug in the user's control element of reinforcement diameter, which in some cases did not change the model diameter
Improved
Removed the use of obsolete code
Improved
Added sending launch statistics
Fix
Using the nominal diameter of the reinforcement when calculating the percentage of reinforcement
Fix
Using the nominal diameter of the reinforcement when calculating the percentage of reinforcement
Fix
Fixed a bug in the user's control element of reinforcement diameter, which in some cases incorrectly changed the model diameter when changing the nominal diameter
Fix
Fixed a bug in the user's control element of reinforcement diameter, which in some cases incorrectly changed the model diameter when changing the nominal diameter
Fix
Fixed a bug in the user's control element of reinforcement diameter, which in some cases incorrectly changed the model diameter when changing the nominal diameter
Fix
Fixed a bug in the user's control element of reinforcement diameter, which in some cases incorrectly changed the model diameter when changing the nominal diameter
Fix
Fixed a bug where straight rods bent into a bottle could not be created if the preferred shape is not set
Fix
Fixed a bug where straight rods bent into a bottle could not be created if the preferred shape is not set
New
Redesign, enhancements, and pattern work
New
Added parameter "AP_Total area without factor" which receives the sum of all apartment room areas without taking into account unheated rooms and without taking into account the reduction factor
New
Added possibility to fill in the room matrix (tab "Sources") with names of rooms of the current project
Improved
Addition of the room separators transformations located in linked files
Fix
Ignored "The target instance does not exist in the given phase" error when accessing FromRoom/ToRoom properties of opening families
Fix
Fixed an issue where the decreasing factor value in the "Room matrix" table did not change when changing the value with the mouse
Improved
Added new translation coefficients: 0.00001, 0.000001, 100000, 1000000
Fix
Corrected some tolerances for initializing corner intersections
Fix
Fixed a bug in the analysis of corner wall intersections when the walls are long
Improved
Added copying legend content for Revit 2017-2019
New
Added an option to specify the thickening of horizontal reinforcement
New
An option was added not to specify the indent of the first and last bar of the background horizontal reinforcement
New
Additional vertical bars in ends and near intersections are now created based on the background reinforcement vertical bar joints settings
New
Added ability to specify hooks for all rectangular stirrups in the preferred shapes window
Improved
Correct display of plugin windows (on top of the Revit window, but not on top of other application windows)
Improved
Removed the "Over windows" option from the plugin settings
Improved
The maximum value of the binding of bending vertical bars to the top and bottom of the slab has been increased from 100 to 200 mm
Improved
Added trimming of L-shaped joints from walls into the upper slab if a rod protrudes beyond the boundary of the slab body
Fix
Fixed a localization error in the parameter assignment dialog box
Fix
Fixed an error that made it impossible to set the type of rebar for joints from the foundation slab along the outside walls.
Fix
Fixed an error that occurs when selecting a foundation slab when the overlying wall intersects with the slab in a small area
Fix
Fixed a bug that caused vertical rods to be removed from intersections in some cases
New
Added command to remove zero segments from dimensional chains
Improved
Output of the arithmetic mean, taking into account rounding
New
Added output of the arithmetic mean
Improved
Skip copying type annotations that are inside the title block
Improved
Writing information about open views in a document and replaced by saving the information to a text file on disk
Fix
Fixed command launching error
New
A new "Restore Views" command has been added
Fix
Fixed a bug with the autosave service in Revit 2017-2018
Fix
Fixed "This key is not in the dictionary" error that occurs when running the "Search" command
Fix
Fixed some errors when working with the specified Proxy
Improved
Added processing of parameters of type
Improved
Added ability to copy line patterns
Fix
Fixed an error that caused the sheet name to be written instead of the document designation in Form 6 according to GOST 21.1101
New
Removed the window with options for selecting columns (replaced by the dropdown list from the "Select" button)
Fix
Fixed a localization bug in the Parameter Assignment dialog
Improved
Changing the properties of nested blocks with the "Set nested objects to ByBlock" and "Set nested objects layer" mini plugins
Improved
Do not output a mass to the table if its value is 0
Improved
Added ability to copy global parameters
Improved
Small redesign of the pattern list
Improved
Made minor changes to the contour definition algorithm for creating area reinforcement
Improved
Added the ability to insert new positions in the specified line
Fix
Fixed error in calculating mass for STB 1704
Improved
Do not process marked positions if old and new values are the same
Improved
Correct processing of numeric parameters
Improved
Processing parameters specified by a formula
Improved
Added a tolerance when checking the length of created U-shaped rods in the end framing
New
Added search and replace in schedule name
Improved
Added replacement of "{" and "}" with "(" and ")" in view names when duplicating
Improved
Removed collapsing and expanding the sheet tree when pressing the "-" and "+" buttons on the numpad
New
Added "Length" property for all linear objects
Improved
Changed the property order of the "Letter Line" object
New
Added new smart object: Letter Line
New
Added an option to cancel a cut
Improved
Added the ability to connect elements by height
New
Reading all parameters and displaying the reasons if they cannot be changed
Improved
Categories added to the "Cut" tab: Electrical Equipment, Mechanical Equipment, Special Equipment, Plumbing Fixtures
Improved
Ignoring an error that occurs if the user interrupts the selection
Fix
Fixed elements selection logic - now you have to select elements once
New
Added dynamic refreshing of category lists when switching between views or documents, as well as when changing the selection of items if the filter window is open
Improved
Added an option to close the filter in the same way as to open it
Improved
Added accounting of shared parameters
Improved
Added ability to turn on/off processing of linked files
New
Added feature to cut elements
Improved
Added saving of the selected tab
Improved
Categories are made unselectable by default
Improved
Added "Roofs" category
New
Added checks for geometry on top of each other
Improved
Removing wrapping from the sheet name
Improved
Request data from the user once when processing multiple polylines with the delete arc segments command
Improved
Added sending plugin launch statistics
Improved
Improved algorithm for determining the top and bottom face of the slab
Fix
Fix some bugs
New
Added processing of fabric reinforcement (Revit 2021 and higher)
New
Removed the window with options for selecting slabs (replaced by the dropdown list from the "Select" button)
Improved
Ignoring an error if it is not possible to determine the necessity of bending longitudinal rebars
Fix
Fixed localization in the parameters editing dialog
Fix
Corrected a typo in the title "Reinforcing ends in transverse direction"
New
Added a service for viewing information about components
Improved
Service update
New
Added possibility to reinforce sloping slabs
New
Added an option to set the orientation of the bottom mesh - either co-oriented or mirrored
New
Added possibility to create an additional filler bar along the edge of the slab (only along the outer edges)
New
Removed the window with options for selecting slabs (replaced by the dropdown list from the "Select" button)
New
Added ability to not create U-shaped rods in the ends of the slab, if the length of the part during generation is less than the specified in the settings
New
Added an option to specify the type of created instances of "Reinforcement by area"
New
Added an option to create a background reinforcement using instances of an "Area reinforcement" for each mesh
New
Added the ability to translate the values of string parameters of created instances of Area Reinforcement into reinforcement bars
New
Added an option to configure U-shaped bars in the ends separately for longitudinal and transverse directions
Improved
Added ability to perform framing of holes up to 300 mm
Improved
Correct display of plugin windows (on top of the Revit window, but not on top of other application windows)
Improved
Removed "Over Windows" option from the plugin settings
Improved
Made some improvements to the contour acquisition algorithms to create reinforcement along the area in different directions
Improved
Parameters for straight bars of hole framing have been separated - for the upper and for the lower mesh
Improved
Correct display of plugin windows (on top of the Revit window, but not on top of other application windows)
Fix
Ignoring an error when failing to read the color of existing colors in the project
Improved
Modifications were made to the methods of rebar shape selection used in reinforcement plugins
Fix
Added a condition to the autosave service - do not delete the current file when restoring from .os$ if the .os$ file does not exist
Fix
Fixed saving the preferred shape for rectangular stirrups
Improved
Removed "Over windows" option from the plugin settings
Improved
Removed "Over windows" option from the plugin settings
Fix
Fixed an error installing plugins through the button in the list of plugins
New
Plugins list redesign
New
Added new numbering direction options on the view
New
Added ability to use beam geometry without considering connections
New
Added the ability to set hooks to all shapes with hooks in the preferred shapes window for rebars. It is possible to specify hooks without specifying shapes
New
Added an option to specify a concrete cover for working reinforcement at the top, bottom, sides and ends
New
Added possibility to set the distance between the centers of the bars of the working rebar
Improved
Correct display of plugin windows (on top of the Revit window, but not on top of other application windows)
Improved
The value of the minimum distance between bars has been reduced from 50 to 25 mm
Improved
Added filtering of the families selected for processing by the "Material for Model Behavior " property ("Concrete" and "Precast Concrete" values are allowed)
Improved
Validation of rebar diameter and message about insufficient diameter removed
Improved
Ignoring incorrect geometry errors when searching for links has been added
Fix
Fixed errors of updating of graphics in the plugin window when changing the distance between the bars of the working rebars
Fix
Fixed an issue where wrong length was taken for straight bars in beams with cross-section height greater than width
Fix
Fixed an error in coordinate calculations when generating a triangular stirrup
New
Added the ability to use column geometry without considering connections
New
Added the ability to set hooks to all shapes with hooks in the preferred shapes window for rebars. It is possible to specify hooks without specifying shapes
New
Added possibility to set the distance between the centers of the bars of the working rebar
Improved
Correct display of the plugin windows (on top of the Revit window, but not on top of other application windows)
Improved
The value of the minimum distance between bars has been reduced from 50 to 25 mm
Improved
Added filtering of the families selected for processing by the "Material for Model Behavior " property ("Concrete" and "Precast Concrete" values are allowed)
Improved
Added ignoring of errors related to incorrect geometry when searching for relations
Fix
Fixed errors of updating of graphics in the plugin window when changing the distance between the bars of the working rebars
New
In schedules with unchecked "Itemized" option added ability to select an algorithm for determining positions
Improved
Added processing of Grids when determining the position of elements in the view
Improved
Added auxiliary methods necessary for future plugin with reinforcement updates
Improved
Sorting levels by elevation
Improved
Correct linking of the plugin window to the Renga window (displaying on top of the Renga window, but not on top of other application windows)
New
Added auxiliary methods to display plugin windows with correct linkage to the Renga window
Improved
Added ability to process levels in Schedules
New
Added possibility to color tabs by type of view in the tabs coloring service
New
An option of specifying a larger value (up to 26) of thickness for the left border coloring has been added to the tabs coloring service
New
Added saving .os$ to the autosave service when saving manually, as well as restoring from an .os$ file if the saving is canceled
New
Added filter copying
New
Added a check for the presence of copied family types in the target document
New
Added ability to select linked files by source document
Improved
Added skipped elements counting when copying
New
Added processing of reference planes
Improved
Taking into account the rotation of any families when copying fittings into the base
New
Added processing option "All but selected elements on view"
Fix
Fixed an error that occurs during filtering of elements when the element has no category
New
Added the ability to hide/show elements in the "Lines" category
Fix
Fixed a build bug that caused the Revit 2019 plugin to be reinstalled
Improved
Plugins list header redesign
Improved
Do not add a separator in a compound parameter if the source parameter has no value
Improved
Added new delimiters for composite parameter: "-(" and ")-"
Improved
Extended the list of filtering categories
Improved
Read-only parameters are excluded from the selected items when filling the list of parameters
New
Added GOST 7473-2010
New
Added GOST 19904-90
Improved
Algorithm optimization
New
With each update check, added checking and correcting Revit addin files for registration entries of plugins like Application
Improved
Saving in presets not only the category, but also the element type
Improved
Filters for displaying licenses were added to Personal Account
Improved
Filters for displaying licenses were added to Personal Account
Improved
Filters for displaying licenses were added to Personal Account
Improved
Added processing of the "Generic Model" host category
Improved
Added processing of the "Generic Model" host category
Improved
Amended due to the replacement of title blocks according to GOST R 21.1101-2013 with title blocks according to GOST R 21.101-2020
Improved
Amended due to the replacement of title blocks according to GOST R 21.1101-2013 with title blocks according to GOST R 21.101-2020
Improved
Amended due to the replacement of title blocks according to GOST R 21.1101-2013 with title blocks according to GOST R 21.101-2020
New
Title blocks according to GOST R 21.1101-2013 were replaced by title blocks according to GOST R 21.101-2020
New
Tables according to GOST R 21.1101-2013 are replaced by tables according to GOST R 21.101-2020
Improved
Amended due to the replacement of title blocks according to GOST R 21.1101-2013 with title blocks according to GOST R 21.101-2020
Improved
Amended due to the replacement of tables according to GOST R 21.1101-2013 with tables according to GOST R 21.101-2020
New
Added possibility to specify a negative initial numbering value
Fix
Corrected the position of controls in the window for setting additional vertical bars near intersections
Improved
Removing linked documents and family documents from the target document list
Fix
Fixed localization error of some values
Improved
Zero horizontal indent for cells with dates in title blocks
Fix
Do not run the "Signatures" command for side stamps
New
Added the ability to add a layout name to the title block when inserting into a layout
New
Added ability to set a layer for signatures
Improved
Set the horizontal cell indent to 0.5 on insertion
Improved
Added the regeneration of the drawing when closing the "Fields" window
Fix
Reset date when setting default values for fields
New
Added possibility to set leading zeros for the sheet number
Improved
Added new public methods used in plugins
New
Added ability to write back sheet number and name, specification name
New
Added adaptivity to the main window of the plugin (ability to stretch the window)
Improved
Some code refactoring completed
Fix
Fixed bug of reading sheet name from wrong cell for stamps: GOST 21.1101 Form F4, DSTU A.2.4-4 Form F4 t STB 2255 Form E2
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Fix
Removed the use of a static resource dictionary, which in some cases leads to errors when starting plugins
Improved
Added ignoring FIPS compliance for encryption algorithms to the application configuration
Improved
Added ignoring FIPS compliance for encryption algorithms to the application configuration
New
Added ability to delete unplaced spaces
New
Added ability to delete unplaced rooms
Fix
Corrected a bug where vertical rebars were not created when there is no overlying floor and at certain joints settings
Fix
Fixed incorrect display of the name of the property that specifies the length of the middle half stroke of the cut
New
Added the option to log out of personal account with the detachment of workplace
Improved
Added ignoring the color profile of the system when loading icons from plugin resources
Improved
Added ignoring the color profile of the system when loading icons from plugin resources
Improved
Added ignoring the color profile of the system when loading icons from plugin resources
Improved
Added ignoring the color profile of the system when loading icons from plugin resources
New
Autosave. Creating a copy when opening and transferring backups
New
In the "View Filters" section, added collection and displaying of filters not used in views or templates
New
Added an option to delete project shared parameters (without checking their usage)
Improved
Removed mandatory re-search after deleting unused shared parameters
Fix
Fixed an error which caused non-drawn elements in tables to be selected
New
Added browser authorization
Improved
Добавлены маленькие иконки команд
Improved
Removing the backup functionality
Improved
Autosave file and temporary file are now saved in the specified folder
Fix
Corrected a bug that made it impossible to rename items in the Project Manager when the autosave service was on
Improved
When calculating the text length, the size value is now used, taking into account the unit format set in the dimension type
Fix
Fix an error that changed the availability of creating tied stirrups of lower horizontal reinforcement in the framing of openings when changing the number of horizontal bars of upper reinforcement
New
Added secure element processing with the ability to display annotation errors
Fix
Fixed an error that incorrectly set the overlap length for straight joints from the foundation plate
Fix
Fixed a bug where straight joints were not created if there is a upper wall, no floor, and the option "consider slab conditionally existing" is enabled
Improved
Added "Leader" property to the Fragment Mark, allowing to enable/disable the leader
Improved
Added property "Shelf height" to Level Mark
New
Added ability to create dimensions for crossed rebar
Improved
Filtering in the type list for dimensions only suitable for linear dimensions types
Fix
Ignoring the "Can't set/get leader position..." error in the method of removing spot elevation duplicates
Improved
Adaptivity of window components was improved
Fix
Fixed a bug that caused AutoCAD to crash when adding a block to a custom database
Improved
Added a check to connect plugins to the ModPlus platform
Improved
Added a check to connect plugins to the ModPlus platform and check the built menu
Improved
Added a check to connect plugins to the ModPlus platform and check the built menu
Improved
Added processing of the multi-reference annotations to the quick selection of annotations
New
Added the "All by selected" operation option that fills the list of categories by selected elements, but processes all elements in the model
New
Added parameter filter in the tree by parameter name
Improved
If the parameter is not set, the value of the parameter is displayed as "[Not set]"
Improved
If the current view is a schedule, the filter will not open
Fix
Fixed an error that causes the focus to be transferred to other application windows when the filter is closed
Improved
The plugin window is made non-modal (does not block AutoCAD)
New
Added an option to change the source for an existing table
Improved
Added saving of the last opened folder when selecting an Excel file.
Fix
Improved the accuracy of getting the width of the cells
Fix
Fixed an error that occurs when adding new tables if the color of filled region type created when tables were previously added has a changed fill color
Fix
Fixed an issue with adding an offset from the bottom of the slab when modeling L-shaped joints from the foundation slab to the overlap length
Fix
Fixed an error that incorrectly set the overlap length when modeling L-shaped joints from the foundation plate
Improved
Made some edits to grids processing when creating dimensions
Improved
Made some edits to grids processing when creating dimensions
Fix
Fixed a bug that did not create duplicate legends, but the content of the original legends was copied to the same legend in the target document
New
Removed pop-up notifications about updates
Fix
Ignoring the "eNotImplementedYet" error when processing objects whose scale list cannot be edited
New
Added possibility to specify the initial numbering value with leading zeros (001, 002, ..., 00N)
New
Added a separate button on the ribbon that calls the command to restore the text position at the selected dimensions
Fix
Fixed some bugs in the text offset algorithms
Improved
When launching the application, a request for user data is performed in the background without generating errors
Improved
When launching the application, a request for user data is performed in the background without generating errors
Improved
When launching the application, a request for user data is performed in the background without generating errors
Improved
Optimized downloading of data on backup copies of user files when opening Personal Account
Fix
Fixed "Invalid number of references" error that occurs when processing dimensions placed on "Level" element
Fix
Fixed "Invalid number of references" error that occurs when processing dimensions placed on "Level" element
Fix
The error "Invalid number of references" was fixed in the auxiliary method of deleting zeros from dimensional chains, which appeared when processing dimensions, set on the element "Level".
Improved
Added prohibition to run the application from a temporary folder of the WinRar archiver
Improved
Added prohibition to run the application from a temporary folder of the WinRar archiver
Fix
Fixed a bug that prevented loading parameter settings from saved xml files with reinforcement settings
Fix
Added default values loading in case the default reinforcement settings storage file is corrupted
Fix
Fixed a bug that prevented loading parameter settings from saved xml files with reinforcement settings
Fix
Added default values loading in case the default reinforcement settings storage file is corrupted
Fix
Fixed a bug that prevented loading parameter settings from saved xml files with reinforcement settings
Fix
Added default values loading in case the default reinforcement settings storage file is corrupted
Fix
Fixed a bug that prevented loading parameter settings from saved xml files with reinforcement settings
Fix
Added default values loading in case the default reinforcement settings storage file is corrupted
New
Added an option to view error details when clicking on the notification
New
Added new smart object: View/Section label
Improved
A leader with text was added to the "Fragment mark" smart object
New
Added auxiliary methods necessary for reinforcement plugins
Fix
Fixed an error when L-shaped intersections were not found
New
Added command to create spot dimensions by elements from linked files
New
Added processing of beams, openings and curtain walls
Improved
Improved algorithm for filling lists of preferred forms of reinforcement bars
Improved
Prohibit startup in families
Improved
Removed functionality for editing reinforcement of individual beams in a group
New
Added possibility to specify the shape for longitudinally bent reinforcing bars
Improved
Improved algorithm for filling lists of preferred forms of reinforcement bars
Improved
Prohibit startup in families
Improved
Removed functionality for editing reinforcement of individual columns in a group
Improved
Improved algorithm for filling lists of preferred forms of reinforcement bars
Improved
Prohibit startup in families
New
Added possibility to specify the shape for longitudinally bent rebars
Improved
Improved algorithm for filling lists of preferred forms of reinforcement bars
Improved
Prohibit startup in families
Improved
Ignoring the intersections of two walls when the angle of intersection is less than 45 (or more than 135) degrees
Fix
Fixed a bug where vertical bars were created with uneven spacing around small holes, ignored when cutting rebar
Fix
Corrected an error that caused incorrect binding of straight joints from the foundation slab to the bottom of the slab
Improved
Added no launch in families
Fix
Fixed error «Filter is already applied to the view»
Improved
Added auxiliary methods necessary for reinforcement plugins
Fix
Fixed an error launching the settings window in Revit version earlier than 2019.2.2
New
Added advanced settings for the tab coloring service
New
Added multiplier result
Improved
Icons changed
Improved
Search optimization
Improved
Reduced number of events on which the tab coloring service triggers
Improved
Added Revit 2019 version check necessary for the tab coloring service
Improved
Updating references to used libraries for Revit 2019
New
Added a service for coloring tabs according to their affiliation with documents
Improved
Edits were made to the legend copying algorithm to account for legend duplication errors in the target document
Improved
Added retries to copy unpacked files in case the file to be updated is busy
Fix
Fixed plugin launch error on the ceiling plan
Improved
Increased the number of parameters in a composite parameter from 3 to 10
Improved
Added processing of the detail curves to the quick selection of annotations
New
Added dimension processing by "Measurement", "Text override" and "Text rotation" properties
Fix
Ignoring the "View does not belong to a project document" error
Improved
Service update
Fix
Added an icon for the dark theme for the "Fragment mark" command
New
Added new smart object: fragment mark
Improved
Changed the grouping of materials from a grouping by property "material category" to a grouping by property "material class
Improved
Increased number of retries to check access to the site and web services
Fix
Fixed an issue where unpublished plugins were displayed in the plugins list
Improved
Adjustments were made to the algorithm for collecting parameters in the schedule
Improved
Service update
Fix
Fixed an error comparing products, leading to an error when collecting products data in the "Specifications" and "Products to table" plugins
Fix
Fixed an error of specification tables filling when some values are missing, leading to an error of the "Products to table" plugin operation
Fix
Fixed an issue where the “Note” column was not filled out in the methods of filling tables used by the “Specifications” plugin
Fix
Fixed bug causing incorrect rotation of rebar hooks depending on the position of the beam in space
Improved
Exclusion of linked file instances from processing when collecting parameters in the schedule
Fix
Incorrect filling of the list of rebar types for stirrups was fixed
New
Added copying of viewports with header position saved. Only for Revit 2022 and higher!
New
Added the ability to duplicate generic annotations
New
Added the ability to offset the view depth of duplicate views
Improved
Changed the plugin icon
Improved
Optimized some algorithms
New
Using model bar diameters when calculating the location of generated reinforcement in Revit 2022
Improved
Added the ability to specify end cover by a numeric field instead of a drop-down list, with the option to set the value to 0
Fix
Fixed bug "Cannot convert object of type "System.String" to type "mprColumnsReinforcement.Models.Parameters.RebarParameters"
New
Using model bar diameters when calculating the location of generated reinforcement in Revit 2022
New
Added the ability to re-select slabs that were processed using the plugin in the past
Fix
Fixed the "No elements in sequence" bug that caused some slab reinforcement cases
New
Using model bar diameters when calculating the location of generated reinforcement in Revit 2022
New
Deletion of previously created rebar is now limited to framed openings only (only for rebars created after the current update)
Improved
Unused rebar options are now hidden instead of being unavailable
Improved
Added the ability to specify end cover by a numeric field instead of a drop-down list, with the option to set the value to 0
Improved
Lower diagonal framing of openings is not created if the opening is formed by the Doors category family, regardless of reinforcement settings
Improved
Added restriction on creating additional vertical bars near intersections only for walls intersected at right angles
Fix
Fixed a bug that caused the reinforcement of openings from unchecked groups
Fix
The "The spacing isn't bigger than 0.0" error that occurs when creating vertical bars of background reinforcement has been fixed
Fix
Corrected an error in incorrectly filling in stirrup steps, leading to errors in stirrups generation
New
Added auxiliary methods for working with the diameter of the rebar, taking into account the differences of version 2022
Improved
Added "for all" options when copying legends
Fix
Fixed a bug with selecting a table value when opening a plugin window if there is no saved value
Improved
Added an additional check for the presence of a stamp file when inserting a format
Improved
Added the ability to disable the logo from a block or from a file to use fields
Fix
Fixed the error of replacing a format with a 5 mm bottom frame with a format with a 10 mm bottom frame
Fix
Fix bug "The referenced object is not valid, possibly because it has been deleted from the database, or its creation was undone"
Improved
Removed sheet processing
New
Added support for Revit 2022
New
Added support for Revit 2022
New
New algorithm for numbering schedules with unchecked "Itemized every instance "
Improved
Removed reverse zoom when command is interrupted
Improved
Added processing of the "Detail components" category to the quick selection of annotations
Improved
In the quick selection of annotations, the display of an error when interrupting the selection of elements is removed
Improved
Removed version checking of files added to the database
Fix
Fixed the error "This instance does not have a swept profile"
Fix
Fixed a bug with the offset of the joints from the bottom edge of the foundation slab
Fix
Added replacement of prohibited characters in the name of the drafting view being created
New
Added support for AutoCAD 2022
New
Added support for AutoCAD 2022
New
Added support for AutoCAD 2022
Fix
Fixed a bug where auto layers stopped working after switching between drawings
Improved
The maximum value of the cover layer of the working reinforcement is increased to 100 mm
New
Added processing of detail lines
Fix
Fixed a bug where the dimensions were not set on the extreme faces of families when the option to set the dimensions along the center line was disabled
New
Added the ability to re-select columns that were processed during the last use of the plugin
New
For transverse reinforcement, added the ability to set an offset from the bottom face of the column
New
Added consideration of reinforced concrete beams located between the column and the overlying floor when searching for relationships between columns
New
Added the ability to create rectangular stirrups for transverse reinforcement at 45 degrees
New
Added the ability to create joints from foundation slabs
Improved
Only plain rebars are available in the transverse reinforcement bar type list
Improved
Increased the vertical size of the dialog for editing the distances between longitudinal reinforcement bars
Fix
Fixed incorrect localization in the window for selecting preferred reinforcing bar shapes
Fix
Fixed a bug with setting the wrong value of the diameter when changing the type of reinforcing bar of transverse reinforcement
Fix
Fixed a bug where extra elements appeared in the default reinforcement settings window after resetting the values
Fix
Fixed error with saving reinforcement settings to xml file
Fix
Fixed the error of creating L-shaped joints into the overlying slab when the direction of spans in the slab is set on a face that is not parallel to the column faces
Fix
Fixed some bugs in the algorithms for finding relationships between columns
Improved
Increased tolerance for distance checking in common methods used by various plugins
Improved
Family selection added to annotation quick selection
New
Added new command "Grid bubbles visibility"
New
Added new command "Select annotations"
New
Added the ability to hide/show reinforcement elements
New
Added the ability to set layers for blocks with specific names
Improved
The plugin window has been redesigned. Plugin window can now be stretched
Improved
Optimization of the plugin code
Improved
Added the ability to process view parameters in schedules
Improved
Added removal of zero segments when dimensioning columns
Fix
Removed the error display in the case when the dimension cannot be created (when the columns are connected to the walls)
New
Added the ability to dimension columns on the floor plan
New
Added the ability to specify the point of the dimension line
Fix
Fixed some bugs when processing linked files
Improved
The button for copying filters is now available only if there are checked filters in the left zone and checked views in the right zone
Improved
The "Apply" button is now available only if there are filters in the right zone with the "New" or "Remove" status
New
Added copying of the contents of copied drafting views
Fix
“Select All” and “Deselect all” buttons now handle list items based on search (only displayed items)
Improved
Made changes to the algorithm for removing zero segments from dimensions
Fix
Fixed a bug that occurred when reading data from a product without position
Fix
Fixed a bug where the height of products was not set
New
Added new smart object: weld joint
New
Added new smart object: secant nodal leader
New
Added the ability to add masking to hide the background for all objects with text
New
Node Leader: added value editor by double click
Improved
Nodal leader: for a round marker, the drawing order has been changed to account for passing through a point
Improved
Nodal leader: Added a new property "Text Always Horizontal"
Improved
The palette of properties of intelligent objects has been renamed to "ESKD Properties"
Improved
Added sorting in alphabetical order in the style settings window
Fix
Waterproofing: fixed the second line drawing error when zooming
Fix
Straight axis: fixed a bug where the position of landmark markers did not change
Improved
A small icon has been added to the button on the ribbon to be able to add a button to the quick launch bar
Fix
Fixed an error in the analysis of walls when the bottom of the wall is completely cut off by the opening
Fix
Fixed a bug where the group for creating vertical stirrups in the frame of openings did not become available
Fix
Fixed a bug where the shape of the reinforcing bar of the second part was applied at the intersections, which is not available
Fix
Fixed a bug where additional vertical bars at the ends and near openings were created with a protrusion above the wall
New
Added the ability to create cross clamps using Revit hooks
New
Added the ability to re-select walls that were processed in the past using the plugin
New
Added the ability to create each transverse clamp with a separate reinforcing bar
New
Added the ability not to cut background reinforcement bars with openings to certain sizes
New
Added merging of vertical bars of the frame of openings when overlapping
New
Added the ability to set 3 bars in a row when creating straight bars for framing openings
New
Added the ability to separately set U-shaped rods in the frame of the openings at the top and bottom
New
Added the ability to create tied stirrups in the frame of the openings along the bottom and vertically
New
Added the ability to set the layout of tied stirrups in the frame of openings along the length of the opening or along the length of straight bars
New
Added the ability to create straight outlets of vertical bars of background reinforcement without taking into account the overlying elements
New
Added the ability to create additional vertical bars near intersections
Improved
Changes were made to the algorithm for finding openings, allowing you to process openings created by MagiCAD software
Improved
Added an increase in the bend radius of transverse clamps (studs) in the places where additional reinforcement of ends and intersections is installed. Only for studs with hooks in sketch
Improved
Added consideration of attached columns when creating horizontal bars of background reinforcement
Improved
Added consideration of intersecting walls when creating horizontal bars of background reinforcement (cross intersections)
Improved
Added more correct consideration of adjacent openings when creating a frame of openings
Improved
Added separate settings for all types of reinforcement in the frame of openings in the settings window for preferred reinforcing bar shapes
Improved
Added the ability to disable the option when the outermost vertical bars of the background reinforcement are displaced when U-shaped bars hit the bend at the end of the wall
Fix
Fixed a bug where it was not possible to specify the second length of the overlap for joints from the foundation slab of the type "Two L-shaped bars of different lengths with a standard bend"
Improved
Added additional processing of grids in the method of removing zero segments in dimension chains
New
Feedback form added
Fix
Fixed a bug where the entered sizes were not saved
Fix
Fixed error with incorrect detection of the running Renga program
New
For Revit 2017-2020: a note about using the "Reload Latest" command has been added to the plugin window
New
For Revit 2021: added disabling of the plugin when using the "Reload Latest" command
New
Added notification settings to the settings window
New
Added notification settings to the settings window
New
Added notification settings to the settings window
New
Added notification settings on the "Configuration" tab in the "Personal Account" group
New
Added notification settings to the settings window
New
Added display of news depending on their type and user notification settings
New
Added a new smart object - Nodal leader
Improved
Added the "Refresh Graphics" option to the "Find" function
Improved
Added property "Show asterisk" to Level mark
Fix
Fixed some bugs for Level mark
New
Added the ability to remove selected view filters
New
Added the ability to delete selected schedules
New
Added the ability to remove unused shared parameters
New
Changed the layout of the plugin window
New
Added the ability to insert a diameter symbol when inserting a name into a table
New
The buttons for calling the function "Signatures" have been added to the ribbon and to the palette
New
Added the ability to use the "Signatures" function from the "Title blocks" plugin when creating a format with a title block
New
Added functionality for inserting signature blocks over title blocks
New
Redesigning core code with support databases with an optimized codebase
Improved
Support for updated databases with an optimized codebase
Improved
Support for updated databases with an optimized codebase
New
Optimizing the codebase
New
Added options for selecting elements in the view: standard selection by frame, ordinal selection and selection by curve
New
Added filtering of items by category when selecting items in a view
New
Added collection of parameters from selected elements and displaying them in the list
New
When working in a view, the plugin window does not block Revit
Improved
Various fixes and improvements
Fix
Fixed a bug with backup plugin configuration files in the Personal Account
Improved
The auto-update module has been removed from the resources of the Configurator
Fix
Fixed launch error after updating working libraries
Fix
Fixed a bug that occurred when creating an outline frame in some cases
Fix
Fixed launch error after updating working libraries
Fix
Fixed launch error after updating working libraries
Fix
Fixed launch error after updating working libraries
Fix
Removed generic classes that depended on library version number when used
Fix
Removed the display of an error about the presence of not installed components when checking for updates while running blocking programs
New
Added post-processing with the removal of zeros from the dimension chain
New
Added post-processing with the removal of zeros from the dimension chain
New
Added post-processing with the removal of zeros from the dimension chain
New
Added the ability to hide/show elements in the "Generic Models" category
New
Added the ability to hide/show elements in a view with an applied template in the mode of displaying properties of a temporary view
Improved
Service update
New
Added the ability to export / import fields to xml file
Fix
Fixed bug with saving width factor for default fields
Improved
Service update
New
Installing plugins using the installation package instead of direct links to the site
New
Checking the location of the installed version of ModPlus
Improved
Optimization of the number of sent requests to the server when checking for updates
New
Migrating user data folder
Improved
Do not start module update if blocking programs are open
Fix
Fixed some bugs
New
Replacement of the update algorithm: updates are downloaded as a single package containing all the required updates, using web services instead of direct links to the site
New
Added the ability to move the filter around the screen
New
Added option "dynamic selection", which allows to select elements in the model when choosing a position in the tree
New
Added consideration of system types when grouping categories in a tree
New
Added the ability not to change the bend diameters for existing types of reinforcement
New
Added joining of frame rebars for openings when they intersect
Improved
Improved algorithm for creating a contour for reinforcement
Improved
Added the ability to enter offset and step of bars in the frame of openings, rather than select from the list
Improved
Added sorting of holes in the list by frame availability
New
Added the ability not to change the bend diameters for existing types of reinforcement
Improved
Column analysis does not interrupt analysis in case of error
New
Added the ability not to change the bend diameters for existing types of reinforcement
New
Added unification of horizontal rebars of the frame of openings when they intersect
Improved
Bug fixes and improvements
Improved
Added services common to reinforcement plugins for subsequent removal of services from plugins
Fix
Fixed a bug that in rare cases caused Revit to close when launching a plugin
New
Added the ability to replace duplicate types of families
Improved
Fixed some bugs
Improved
Updating the codebase
Improved
Removed service for checking new licenses
Improved
Changed address of web services
Improved
Changed the time of checking news and the availability of new licenses
New
Added the ability to copy groups
New
Added the ability to copy standard types without a category (dimension type, text type, etc.)
Fix
Fixed a bug where shared parameters were not displayed
Fix
Critical update due to changes in hosting
Fix
Critical update due to changes in hosting
Fix
Fixed a bug where auxiliary libraries were unpacked from plugin installation files if there were local auxiliary libraries of newer versions
Fix
Fixed "Field not found" error
Fix
Fixed "Field not found" error
Fix
Fixed "Field not found" error
Improved
Bug fixes and improvements
New
Removing support for old plugin interfaces
New
Removing support for old plugin interfaces
New
Removing support for old plugin interfaces
Improved
Service update
New
Added copying of text fields of original dimensions
New
Added copying of the text position of the original dimensions
New
Added copying of text fields of original dimensions
New
Added copying of the text position of the original dimensions
New
Added work with parallel dimensions
Improved
Service update
Improved
Service update
Improved
Service update
Improved
Bug fixes and improvements
Improved
Bug fixes and improvements
Fix
Fixed a bug with removing annotative scales from multileaders after using the plugin
Improved
Bug fixes and improvements
New
Added copying of materials
Improved
Improving the work of some parts of the code
New
Added the ability to copy the values of the title block parameters
Improved
If the duplicated text is in a group, then the group itself will be duplicated
Improved
Rebuilding a ribbon tab after editing customization settings
Improved
Reopening the palette when changing the workspace (if the palette is not connected to the main ModPlus palette)
Improved
Rebuilding a ribbon tab after editing customization settings
Improved
Reopening the palette when changing workspace
Fix
Fixed name and description
Improved
Improving the work of some parts of the code
Improved
Added the ability to enter offset and step of bars in the frame of openings, rather than select from the list
Fix
Fixed a bug with creating vertical reinforcement in walls with doorways
Fix
Fixed a bug with creating joints from the wall
Fix
Fixed a bug with grouping openings by sizes when changing the boundaries of size groups
New
Added selection of the document by which the bend diameter is adjusted for rebar types
New
Added the ability to create separate upper and lower horizontal bars for the frame of openings
New
Added the ability to create stirrups along the upper frame bars of openings
New
Added the ability to create straight joints from foundation slabs
Improved
Reduced plugin window opening time
Improved
Changed the algorithm for cutting vertical reinforcement bars
Improved
Removed reinforcement settings for groups of openings by sizes
Improved
In the settings of wall reinforcement, additional vertical reinforcement bars at the ends are placed in a separate group
Improved
Removed the creation of joints from the foundation slab by additional vertical bars at the ends of the walls
Fix
Fixed a bug with incorrect indentation of U-shaped bars along the upper edge of the wall (the indent was taken as a cover layer from the ends of the horizontal reinforcement instead of the vertical one)
Fix
Fixed a bug with creating extra U-shaped bars along the top face of the wall when creating additional vertical bars at the ends of the wall
Fix
Fixed a bug where the anchoring / overlap calculation window was hidden behind the main plugin window when the "Over Windows" setting was enabled
New
Added selection of the document by which the bend diameter is adjusted for rebar types
Fix
Fixed a bug where the anchoring / overlap calculation window was hidden behind the main plugin window when the "Over Windows" setting was enabled
New
Added selection of the document by which the bend diameter is adjusted for rebar types
Fix
Fixed a bug where the anchoring / overlap calculation window was hidden behind the main plugin window when the "Over Windows" setting was enabled
Fix
Fixed a bug with processing area and path reinforcement that are not children of any host
New
Added helper methods for use in plugins
Fix
Fixed a bug where, when opening new documents, the message about missing import elements continued to appear if the plugin was launched in a document that does not have import elements
New
Added ignoring of dimension references to hidden elements
New
Added deletion of segments of zero length
Improved
Service update
Improved
Added display of the number of plugins currently visible in the list
Improved
The "Install and Enable All" command is split into two commands
Fix
Fixed bug with updating the list of visible plugins when deleting a nested plugin or group from the menu
Fix
Fixed error reading saved data when opening the settings window through the floating menu
New
Added processing of fields taking into account the width factor
New
Added the ability to specify width factor for fields
Improved
Added new public methods for dependent plugins
Fix
Fixed the width of the list of plugins in the palette
Improved
The auxiliary library Yandex.Metrica.NET.dll is duplicated in the root ModPlus folder for use by the auto-update module
Fix
Added processing of special cases of coincidence of the dimension line
Fix
Added handling of dimensions for grids that are not recreated by standard functions
Fix
Fixed bug with filtering by group of view types in the right list
Improved
Added processing of views from the group " Rendering, Drafting Views"
Improved
Loading the list of templates/views is collapsed to speed up the loading process
New
Plugin renamed
New
Added the ability to copy filters both between view templates and between views
New
Added filtering by type of views, similar to Revit
New
Added tree search in the right zone
New
Added collapse/expand and check/uncheck commands
Improved
Improved search algorithm: if there is a match by the name of the template (view), then including filters are not hidden
Fix
Fixed a bug with inserting blocks with a UCS
Improved
Added accounting for UCS when selecting a cell while inserting a value into a table (used by various plugins)
New
Added the ability to specify the storage folder for the user base of blocks
Fix
Fixed error checking the file for storing the block for valid version 2010 instead of 2013
New
For dwg inserts added designation by insertion type (imported or linked). Added filtering by insert type
Improved
Excluded from the list of acceptable documents are documents that are links of one of the documents in the current session
New
Updated built-in function for calculating anchoring length and overlap length
New
Updated built-in function for calculating anchoring length and overlap length
Improved
Added display of distance values between rod centers in the dialog for editing the distances between rods
Fix
Fixed headers in the dialog for editing the distances between rods
Fix
Fixed search bug for overlying slabs
New
Updated built-in function for calculating anchoring length
Improved
Fixed sizes of created U-shaped bars in the frame of openings
Improved
The maximum permissible value of the rebar cover of the main reinforcement is increased to 100 mm
New
The calculation of the length of the anchoring or overlap is placed in a separate window
Improved
Updating supporting libraries
Improved
Considered the "Visibility" property when copying filters
Improved
Added skipping of elements from processing that are owned by another user. The IDs of these elements are displayed in the result window
Improved
Returned function to clear parameter in schedules with warning display
New
Added the ability to create copies of legends
New
Added the ability to offset the view range for duplicated floor plans
Improved
Redesigned the position and name of some settings in the plugin window. Added explanatory tooltips
Improved
Removed the display of messages about the presence or installation of updates for products that are not on the user's computer
New
Added the ability to export/import geometry in a graphical editor
New
Added the ability to create a new pattern by duplicating the selected
New
Added the ability to delete multiple patterns checked in a special dialog
Improved
Removed the "Clear" button when working in schedules
New
Added a new command "Search by value", which allows you to search for smart entities by the value of numeric or string properties
Improved
For the smart entity "Level mark" added property "Separator of integer and fractional parts"
Improved
For the smart entity "Level mark" added the "Text alignment" property and the "Note alignment" property
Fix
Fixed a bug where the text was displaced vertically in the "Level mark" smart entity when it was left-sided
New
Added commands "MIRROR" and "ADDSELECTED" to the standard list of commands to ignore
New
Added collection of all errors that occur when creating reinforcement, with their subsequent display in a special window
New
Added the ability to specify girth bars - horizontal or vertical - for stirrups
New
Added a new type of vertical rebar joints - as separate L-shaped rebars
Improved
Added value 2.0 for the coefficient α when calculating the length of anchoring
Fix
Fixed a bug where overlying floor was not taken into account when creating straight joints of different lengths
Improved
News is displayed regardless of the presence of an open blocking application
Improved
Added value 2.0 for the coefficient α when calculating the length of anchoring
New
Removed plugin filter "Under construction" and added plugin filter "Free"
Improved
The "Install and enable all" and "Disable all" commands now process only plugins visible in the list
Improved
Ignoring the "viewid is not a view" error, which appears in rare cases when there are lincked files
Fix
Fixed error with incorrect indication of the reason in the tooltip on the tray icon, due to which the module's work is limited
Fix
Fixed creation of extra point when draw boundaries of the rectangular viewport in the model space
New
Added handling Foundation slabs (similar to Floors)
Fix
Fixed incorrect numbering in descending order
Improved
Changed name and description
Improved
Added prohibition of plugin work on sheets
New
Added the ability to select the type of reinforcement being created: longitudinal and transverse, only longitudinal, only transverse
New
Added the ability to select or deselect all openings in the list
Improved
Added the ability to set a protective layer from the ends in multiples of 1 mm
Fix
Fixed error loading rebar type from saved reinforcement settings
New
Added the ability to enable/disable the creation of stirrups at the ends and intersections when creating details at the ends and intersections
Improved
When creating stirrups at T-shaped intersections, the stirrups in the wall in which no details are created are not deleted (when creating one U-shaped detail at the intersection)
Improved
Added the ability to create only stirrups in walls (without creating vertical and/or horizontal reinforcement)
Improved
Improved the algorithm for creating spacing reinforcement when creating horizontal reinforcement for walls in which the location line is located at the top of the wall
Fix
Fixed the error of creating intersection reinforcement if the main wall reinforcement is not created
Fix
Fixed error loading rebar type from saved reinforcement settings
Fix
Fixed a bug with saving the type of reinforcement for vertical bars of the openings reinforcement
Fix
Fixed a bug where the number of rows of horizontal bars in the openings reinforcement was set the same as the number of rows of vertical bars
Fix
Fixed the error of receiving data from title blocks within the format boundaries when collecting data from a model
Fix
Fixed naming of the blocks for A3, A4 formats
Fix
Fixed an issue where worksets were not copied
New
Added the ability to insert a note in the text with saving the formatting of the existing text
Improved
Added handling of floors in the plans (all planes, including openings)
Fix
Fixed handling of elements from the linked files invisible on current plan
Fix
Fixed an error that occurs when building a tab on the ribbon when some plugins are disabled, but the adaptation menu is built as standard
New
Added ability to close the filter after applying the action
Improved
Improved algorithm of determining the availability of run of filter based on detach Revit windows
Improved
From the list settings of the sequence, and shortcuts are removed the numbers
Fix
Fixed saving sequences and shortcuts
Fix
Fixed a bug where plugins of type IExternalApplication for Revit was removed from startup when open the Configurator
New
Added AND/OR condition
New
Added the ability to exclude checked elements from the current selection
Improved
The context filter now only runs if the Revit window is active
Improved
Removed loading of plugins type IExternalApplication due to unrecoverable problems
New
Added load plugins of type IExternalApplication in case of their absence in the file ModPlus.addin
New
Added a new smart object – Waterproofing
Improved
Added a new property object "Straight Axis" - rotation Angle of text
New
Added the ability to create horizontal tied stirrups
Improved
Changes have been made to the algorithm for constructing tabs on the ribbon, taking into account that the panels on the tab can already be created by previously loaded plugins
Improved
Reduced the allowed distance between intersection centers used when merging intersections
Fix
Added error handling when calculating intersections that does not interrupt the reinforcement
Improved
Added white background for buttons
Improved
Added the implementation of isolation and inverse isolation of the elements through the transaction (can undo via Ctrl Z)
Improved
Added check the position of the cursor when run the filter through a sequence or combination of keys
Improved
Added sorting of parameter values
Improved
Fixed full description of the plugin used in the tooltip for the button on the ribbon
New
Added configurable options to run the filter
New
Termination of support for Revit 2015, 2016
Fix
Fixed some errors in working with the menu
New
Termination of support for Revit 2015, 2016
New
Added the ability to build on the ribbon small size button for plugins with multiple commands
New
The main algorithms for working with notes are moved to a separate library for later use in a similar plugin for Revit
New
Added the ability to stretch the window
New
Added search by category and notes
New
Added ГОСТ Р 51613-2000 "Трубы напорные из непластифицированного поливинилхлорида. Технические условия" (added by Артём Никишин)
Fix
Fixed typos in ГОСТ 18599-2001
New
Added ГОСТ 18599-2001 «Трубы напорные из полиэтилена. Технические условия» (added by Артём Никишин)
New
Added rendering pipes for the topic "Wood/Plastic"
Improved
Changed icons for some commands
Fix
Fixed bug with alignment of Level Marks
New
Added new intellectual object: be the benchmark
Improved
Completely redesigned the properties palette
Improved
Minor corrections and improvements
Improved
Significant changes and improvements in the algorithms to determine the contours of the slab to create area reinforcement
Fix
Fixed bug in the plugin related to file is missing RevitGeometryExporter.dll
New
Removed the installation of databases. Databases added to the installation archive of the Configurator
New
Removed install file-pointer of dwg database. Installation is performed on Configurator load
New
Added handling of properties with the new data types introduced in Renga 4.0
New
Added "Show" command that allows you to view objects in a 3D scene
New
Added methods for retrieving localized names of the quantities
Fix
Bug fix selection width in the localized value text buttons
Improved
A list of rebars to create stirrups now filled with the rebars of all types of profile diameters less than or equal to the diameter of the main reinforcement
Fix
Bug fix selection width in the localized value text buttons
Fix
Fixed bug with wrong create length of stirrups for exterior location of background vertical rebars
Improved
Improved algorithm for determining the external and internal contours of the slab
Improved
Improved hole grouping algorithm
Improved
Improved contour detection algorithm for creating area reinforcement in slabs of complex configuration
Fix
Fixed an error that occurs if the "Area Reinforcement" option is selected in the background reinforcement settings for the method of creating reinforcement, and background reinforcement creation is disabled
Fix
Fixed an error when creating U-shaped bars in the frame of holes when the "Set with background reinforcement step" option is enabled, if only one part can be created on one of the faces of the hole
Fix
Fixed an error in creating U-shaped bars in the frame of holes with an incorrect step when the "Set with background reinforcement step" option is enabled when the background reinforcement is created by Area Reinforcement
New
Added support Renga 4.0. Removed support for previous versions of Renga
New
Added support Renga 4.0. Removed support for previous versions of Renga
New
Added support Renga 4.0. Removed support for previous versions of Renga
Improved
Improved algorithm for building a tree based on a project browser with a high level of nesting
Improved
Improved algorithm for building a tree based on a project browser with a high level of nesting
Improved
Improved algorithm for building a tree based on a project browser with a high level of nesting
Fix
Fixed a bug in which for copies of sheets the title block was not set, which was not previously set in other sheets
Improved
Corrections based on changes to the title blocks file storage folder
Improved
Title blocks file storage folder changed
Improved
Changed initial window size
Improved
Added additional check menu of adaptation to a valid values before saving the menu in the registry
New
Added the ability to hide preview icons
Fix
Fixed load only one pattern, if a project has two patterns of different types but with same name
Fix
Fixed some localization errors
New
Added a link to Telegram channel on the tab "About"
New
Added check menu when closing
Improved
Optimized work methods for building menu
Improved
Fixed minor bugs when installing/updating plugins
Fix
Fixed Assembly version, resulting in re-updating the plugin
New
Added check hash sums of files that are updated, to avoid the repeated overwriting of the same files from different updates
Improved
Updated system app icon
Improved
Updated window display change history
Fix
Fixed the lack of digital signature, leading to constant renewal
New
Added the ability to control the parameters of the "Crop view", "Crop Region Visible" and "Annotations crop" for views that are copied as a dependent
Improved
Added prohibition of entering invalid characters in numbers and sheet names, types, specifications
New
Added command to open Personal Account
New
Completely redesigned settings window
New
Added settings for Web Server License
New
Added settings for Web Server License
Improved
Service update
Fix
Fixed incorrect definition of access rights to write to the folder for the current user
Fix
Fixed incorrect definition of access rights to write to the folder for the current user
Fix
Fixed some bugs in the algorithms get the number from the text
New
Added check for updates for the helper libraries, which occurs every 30 minutes and shows no notification
Improved
Reduced the minimum value of the height of the window and added the vertical scroll bar for the settings
Fix
Fixed duplication bug viewports that occur in some documents
New
Added the ability to copy raster images and PDF (only for Revit 2020 and above)
New
Added the ability to choose either if the target document already has a Legend with the same name as Legend in the copied sheet
New
Added the ability to choose either if the target document already have a Drafting View that is not inserted for a single sheet, with the same name as the copied Drafting View
Fix
Fixed incomplete unfolding tree nodes for pre-selection in the browser in the case where there are multiple nested groups
New
Added the ability to copy raster images and PDF (only for Revit 2020 and above)
Fix
Corrections based on changes to the table file storage folder
Fix
Corrections based on changes to the table file storage folder
Fix
Fixed error deleting file Hardcodet.Wpf.TaskbarNotification.dll in the folder ModPlus
Improved
When suppressing warning with a severity level of "Error" copying of elements is not performed, and the event log is written to a corresponding message
New
Added a special icon that indicates if there are errors in log
New
Added ability to enable/disable warnings suppression
Fix
Fixed the error which occurred copying some elements when suppressing warnings
New
Added the ability to mark a table flag "is favorite" and use the corresponding filter
New
Added the ability to specify the layer for the created table
Improved
General settings for tables from the plugin and tables from the specified file moved in the lower part of the window
Fix
Fixed bug when reading a table from a file that is open in AutoCAD
Fix
Fixed insert tables, if the layer "0" is locked
New
Added the ability to hide/show elements of category "Structural Foundation"
Improved
Added the ability to hide/show analytical model categories
Improved
Commands hide/display elements by the category now work for views with the applied template, if the template settings not include override graphics for category
Fix
Fixed a bug in which the value of numbering recorded in the parameter when disable the advanced settings of the numbering
New
Added the ability to number the numeric parameters in the schedules
Improved
When numbering in a model of processing eliminated the group as the elements for numbering
Improved
When writing values to the parameter element in the group, added additional check if the parameter is a type parameter. If it is, then the new value is written to the parameter
Improved
Optimized some algorithms
Fix
Fixed markup in the element of settings of the basic reinforcement of the walls
Fix
Fixed markup in the element of frame holes settings
New
Added the ability to set the values of some text parameters for the created reinforcement
New
Added the ability to reinforce holes of complex shapes, provided that all edges of the hole are parallel to the directions of reinforcement
New
Added ability to save current reinforcement settings as default reinforcement settings
New
Added the ability to create U-shaped rods in the frame of holes with a step of background reinforcing rods
New
Added the ability to set the step of the rods for straight rods framing holes
New
Added the ability to set the step multiplicity of U-shaped rods at the ends of plates with respect to the step of the background reinforcement rods
New
Added the ability to create each U-shaped part at the ends of the plate with a separate rod
New
Added the ability to apply the installed protective layer directly to the background mesh reinforcement
Improved
Added the ability to specify the type of reinforcing bar in the drop-down lists by entering a value
Improved
The icon of the button for copying reinforcement settings has been changed
Improved
Improved hole search algorithm
Improved
At the preview, a description rectangle display has been added for holes whose edges are not parallel to the reinforcement directions and for holes that have a complex shape
Fix
Added the ability to specify the value of the design resistance greater than 415 MPa in the window for calculating anchoring
Fix
The length of the U-shaped rods at the ends is now set according to the outer dimensions of the rod, in accordance with GOST 21.501-2018, clause 6.4.7
New
Added the ability to set the values of some text parameters for the created reinforcement
New
Added ability to save current reinforcement settings as default reinforcement settings
New
Added the ability to set the step of the rods for straight rods framing openings
New
Added a button that allows you to group walls, intersections and openings according to the current grouping settings
Improved
Added the ability to specify the type of reinforcing bar in the drop-down lists by entering a value
Improved
The icon of the button for copying reinforcement settings has been changed
Fix
Added the ability to specify the value of the design resistance greater than 415 MPa in the window for calculating anchoring
Fix
The length of the U-shaped rods at the ends is now set according to the external dimensions of the rod, in accordance with GOST 21.501-2018, clause 6.4.7
Fix
Fixed error setting the length of the U-shaped rods in the frame of the openings
New
Download the story of the changes happening now when you go to the tab "About the programm" and only for specified year
New
Added the possibility to display the change story only for the selected component
New
Added the ability to go to the description page of the component directly from the change story
New
Changes in the change story are now displayed with a special badge that indicates the type of change
New
Added processing of edges of slabs
New
Added new theme LightStrict
New
Added "Open ModPlus folder" in the context menu
New
Added "Open UserData folder" in the context menu
Fix
Fixed a bug where the auto-update module runs only in Russian language
Improved
Support libraries used by the auto-update module migrated to the ModPlus root folder
Fix
Fixed handling of string parameters with an empty value when using filters
Fix
Fixed display of terms "Not contains" in the display field filters
New
To the filter elements by parameters added the condition "Not contains"
New
An additional warning was added when the “Automatic displacement of dimension text on dimension modify” checkbox was checked.
New
A new option has been added: “If possible, move dimensional text down rather than to the side”
Improved
Improved algorithm for displacement dimensional text with a large number of dimensional segments
Fix
Removed the check bend radius of the L-shaped joints with the standard bend of the base plates
New
Added support for Revit 2021
New
Added support for Revit 2021
Fix
Fixed saving the reinforcement settings in the xml file
Improved
Changed default values for palette settings
New
Added display of sheets in a tree, repeating the display of the sheets in the Revit project browser
Improved
If the sheets were selected in the Revit project browser, when you start the plugin, these sheets will be checked
Improved
When you use the command undo (Ctrl Z) cancels all the result of the plugin, and not one sheet
Improved
The new sheet names are not displayed by default in the text box and appear when you click on a text box or as the result of the function Search and Replace
Fix
Minor bugs fixed
New
Added the possibility to display the guid of the shared parameters
Improved
The tree elements are divided into two groups – types and other elements
Fix
Fixed localization, leading to incorrect grouping of categories
FIX
Added new field – the date used in title blocks, containing posts
FIX
Added new field – the date used in title blocks, containing posts
FIX
Added the ability to insert line breaks in certain fields
FIX
Added the possibility to set an empty value for fields
FIX
In the choice of products from the database drop-down list the document names prefixed with the short name of the product and added sorting documents in alphabetical order
FIX
In the drop-down list of the document names prefixed with the short name of the product and added sorting documents in alphabetical order
FIX
Added the ability to use a comma as the delimiter between the integer and fractional parts of numbers in the entered formula
FIX
Fixed some localization errors
FIX
Added support for AutoCAD 2021
FIX
Added support for AutoCAD 2021
FIX
Added support for AutoCAD 2021
FIX
Added support for AutoCAD 2021
FIX
Added support for AutoCAD 2021
FIX
Added support for AutoCAD 2021
FIX
Added support for AutoCAD 2021
FIX
Changed directory for download the installation files
FIX
Changes in the logging system errors
FIX
In all templates, the size of the filed with name of the organization has been changed from 1.7 cm to 2.4 cm in height, which allows to enter three lines in the field
FIX
In all templates of capital construction objects, incorrect designations of sections in the design documentation are corrected - SD changed to SM, EF changed to EE
FIX
Fixed duplication of some patterns in the list
FIX
Fixed some errors when exporting hatching to pat file
FIX
Fixed bug causing Revit to close when change import scale on hatch import from pat file
FIX
Made corrections in the upgrade localization files tool
FIX
Fixed import patterns from pat file in operating systems, in which the comma is set as separator of the integer and fractional parts of numbers
FIX
Fixed error running the command BEDIT at a pre-selected block
FIX
Added tree search
FIX
Grouping of views templates by type
FIX
Fixed error displaying "_"
FIX
Ignoring error NotAllowedForThisProxy that occurs when drag grips of some dynamic blocks
FIX
Fixed bug with incorrect display names of some dwg imports
FIX
The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed
FIX
The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed
FIX
The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed
FIX
The error of obtaining the incorrect Z value of the cut plane of the level in the event that the geographic location is specified in the project is fixed
FIX
Added additional check for configurations before creating worksets
FIX
Added preliminary check of the selected xml file when import
FIX
Added the ability to change parameters property "Parameter of type/instance"
FIX
Fixed the wrong entering numerical parameters when change parameter values
FIX
Added sorting when the values are displayed in all lists
FIX
Fixed a bug with inserting tables with merged cells
FIX
Fixed bug adding items with missing properties "Position", "Count" and "Note"
FIX
Added the ability to insert new positions into the specification without closing the window for selecting items from the database or the manual input window
FIX
The error of changing the data of the edited position when setting the “Save entered dimension values” checkbox is fixed
FIX
Added duplication of drafting views with the option "Copy detail" regardless of the option selected in the plugin window
FIX
Changed icons in the taskbar
FIX
Removed the restriction of using files 2013 version when adding blocks and drawings in the user database
FIX
Fixed some errors when loading the plugin list
FIX
Increased the time of verification of purchased licenses
FIX
Fixed error caused by disabling notifications in Windows 10
FIX
Safe execution has been added - if an error occurs when setting the "Workset" parameter for an element, the plugin will not stop working, and elements with an error will be displayed in the result window
FIX
The work of the plugin is divided into tabs
FIX
Added a tab for work with the view templates
FIX
Fixed error updating the Dwg base to the folder with the installed version of ModPlus instead of the user data location folder
FIX
Added handling of IFC reinforcement
FIX
Fixed "Curve length is too small for Revit's tolerance"
FIX
Added window displaying errors that occurred when trying to copy sheets
FIX
If sheets were selected in the project browser before starting the plugin, they will be checked in the plugin window
FIX
When open the plugin, groups of sheets that do not have previously checked sheets appear collapsed
FIX
Fixed display of documents with names containing underscores
FIX
Added explanatory message in select pair of families
FIX
Added the ability to remove the coordination models
FIX
Fixed error running the command "Grids Mode"
FIX
Fixed wrong indentation from the outer walls to the first dimension chain
FIX
Added copy parameter values of type ElementId when copy parameter values from instance of the replaced family
FIX
Added ability to set for instances of duplicate families type from the source family
FIX
Added deletion of uploaded links for the option "Delete all linked files"
FIX
Fixed problem with not closing the progress window if no suitable walls for processing
FIX
Fixed an error in incorrectly defining the current user name when running the application as an administrator who is not the current user
FIX
Fixed an error in incorrectly defining the current user name when running the application as an administrator who is not the current user
FIX
Removed the inscription in the ribbon for the buttons "Grids mode" and "Rebars outside host"
FIX
Added search and replace in the names of duplicate views
FIX
Fixed some bugs in notification of new licenses in the personal account
FIX
Added saving of checked status of the wipe options
FIX
The maximum value of the coefficient of displacement increased from 1.0 to 2.0
FIX
Fixed a bug where the standard menu of adaptation was updated without adding plugins with small icons
FIX
Fixed links when you go to the plugin page
FIX
Improved sorting of sheets by number
FIX
Added the ability to stretch the window
FIX
Update related to replacement of support library
FIX
Update related to replacement of support library
FIX
Update related to replacement of support library
FIX
Update related to replacement of support library
FIX
Replacement of support library
FIX
Replacement of support library
FIX
Fixed error "Index was outside the bounds of the array" when reading the sheets of the project
FIX
Removed "Top most" property and added focus to the plugin window at the end of the copy sheets
FIX
Fixed error "Index was outside the bounds of the array" when reading the sheets of the project
FIX
Fixed bug in search for installed versions of AutoCAD if in the registry data after incorrect removal of older versions of AutoCAD
FIX
Fixed re-show the notification when you buy licenses
FIX
Added the ability to get the value from the multileader, table cell and dimension
FIX
Added the ability to insert new value in the multileader and table cell
FIX
Added the ability to export and import menu of adaptation
FIX
Added ability to hide text for buttons of a small size on the Ribbon
FIX
Added prompt to restart the Configurator with administrator rights in case of an error the file system access
FIX
Fixed problem with changing localization in the main window of the plugin when change the language
FIX
Fixed bug with saving the wrong menu for AutoCAD
FIX
Fixed getting the selected sheets in the case of nested groups
FIX
Increased the time between retries update in case of busy files
FIX
Fixed some bugs
FIX
Improved fault tolerance during loading of the application in case of an error when receiving the registration data of the user
FIX
Improved fault tolerance during loading of the application in case of an error when receiving the registration data of the user
FIX
Added alphabetical sorting
FIX
Fixed "Method not found" when validating access to the internet
FIX
Method for sending user files to add to the public database is replaced with the ftp to http
FIX
Fixed error "The given value for value is not finite", arising from the creation of joints with the big bend from the base plate
FIX
Fixed bug when trying to save an empty menu adaptation
FIX
Fixed error cyclic update support libraries
FIX
Fixed eSelfReference exception that occurs when insert a logo in the title block from the file
FIX
Fixed eSelfReference exception that occurs when insert a logo in the title block from the file
FIX
Added the ability to specify a new name for the duplicate
FIX
Added search and replace in the new names of duplicate sheets
FIX
Added formats by ISO 2016
FIX
Added ability to set stamp by ISO 7200:2400
FIX
Added the ability to specify the multiple dimensions of formats compliance table GOST
FIX
Check period default changed from 30 minutes to 4 hours
FIX
Added property "Top Most" for window
FIX
Added completion message to the copy sheets
FIX
Fixed help links for mini-plugins in the settings window
FIX
Modified address access the help by pressing F1
FIX
Modified address access the help by pressing F1
FIX
Amendments to the license agreement
FIX
Added more information when sending errors
FIX
Added support for SSL/TLS protocols when they access the web services
FIX
Fixed error at application startup
FIX
Fixed error at application startup
FIX
Added retries when verifying internet access
FIX
Added retries when sending requests to web services
FIX
Fixed some bugs
FIX
Added retries when verifying internet access
FIX
Added functions version checking according to the registry
FIX
Changed the update mechanism of support libraries to avoid loss of digital signatures
FIX
Added the ability to resize the window of setting preferred forms of rebars
FIX
Added the ability to specify the preferred form of rebars
FIX
Added additional logging variables
FIX
Added debug information to find errors in the code
FIX
Added display of error messages about blocking access in case of possibility of definition of such type of errors
FIX
Added download support libraries in their absence
FIX
Fixed some bugs
FIX
Added check parameter properties "read-Only" before writing new values
FIX
Fixed bugs in the product mix of rebar
FIX
Added diameter 6.6 to GOST 34028-2016
FIX
Added check that pointed out the second point of the rectangle
FIX
Added option not to show notifications for unimportant updates
FIX
Fixed bugs with the "Do not remind" flag when new functions are available
FIX
Optimized update checking methods
FIX
Fixed various small bugs
FIX
Removed server work (backup)
FIX
Fixed access to your personal account
FIX
Fixed access to your personal account
FIX
Removed work with configuration file from the Settings tab
FIX
In Personal account added a new feature – backup settings
FIX
Added the ability to specify the block scale products
FIX
Corrected icon functions
FIX
Fixed some bugs
FIX
Added check for invalid characters in the name when you create and rename a layout
FIX
Added check for blank value is entered the layout name
FIX
Added the ability to apply the current layer to create tables and block
FIX
Fixed a bug adding a large indentation in the cell
FIX
Added usage of the current layer to the pasted stamp
FIX
Added saving of input values of the component parts of the number of the page for advanced configuration numbering
FIX
Storing user-defined standards moved from configuration file to a separate file
FIX
Added the ability to set the layer for xlines, rays, circles, ellipses, splines, arcs,
FIX
Corrected icon functions
FIX
Changed function description
FIX
Added the ability to set a layer for lines and polylines
FIX
Added handling of curtain walls: the outline of the curtain wall, panels, the mullions, the grid lines
FIX
Added update of existing intellectual entities when the document is opened
FIX
Fixed a typo in the report calculate the length of anchoring
FIX
Added the ability to specify the number (from 1 to 3) and the step of additional vertical rebars at the ends of the walls
FIX
Fixed the error of the indentation of vertical rebars from the ends of the walls in the case of creating U-shaped rebars at the ends
FIX
Added the ability to specify the option of choosing walls and foundation plates - frame selection or selection by pick elements
FIX
Fixed the error of incorrect display of the numerical parameters of the walls when grouping
FIX
Added ability to re-analyze selected walls
FIX
Added processing of pre-selected walls when starting the function
FIX
Added the ability to disable the property "Trim joints by wall body" for joints from foundation plates
FIX
Fixed a bug that occurred when trying to clear columns of text with a zero width
FIX
Changes in methods of updating localization files
FIX
Fixed length setting anchoring to a U-shaped rods horizontally in the reinforcement of openings
FIX
Fixed some bugs
FIX
Fixed a typo in the GOST R 57837-2017
FIX
Fixed handling of openings in the wall created by the Opening element
FIX
The creation of dimensions are combined into one transaction, allowing you to undo the creation of all the dimension chains at once
FIX
Added an indication of whether the selected parameter instance or type parameter
FIX
Fixed some bugs
FIX
Added handling of Rebar Containers (Revit 2016 and later)
FIX
Fixed some bugs
FIX
Replaced third-party library
FIX
Added the ability to fill in the parameters of type for schedules with the unchecked "Itemized every instance"
FIX
Added capturing and displaying top-level errors
FIX
Changes in the algorithms for finding intersections with a given wall with a cancelled accession
FIX
Completely rewritten function code
FIX
Added the ability to get the sum of the lengths of selected entities without closing the window function
FIX
Insert the result as text, in a table cell and export to Notepad take into account the separator of the integer and fractional digits specified in the settings
FIX
Added display of the length of each entity
FIX
Changes in the algorithm of copying of parameters of the instance model families
FIX
The possibility of concurrent selection of equal types of different family duplicates that belong to the main family
FIX
Added the ability to copy the parameter values of instances of families
FIX
Improved responsiveness of the interface when displaying progress
FIX
Fixed output of empty list of errors that occurred when the function work
FIX
Fixed error "The given key was not present in the dictionary" when replace instances of families
FIX
Added additional check for a match type parameters in search of similar families (duplicates)
FIX
Added regeneration after changing the drawing order
FIX
Check erased layers before using
FIX
Fixed the error “Unexpected tab”
FIX
Fixed the error “Unexpected tab”
FIX
Changes in the construction methods tab on the ribbon
FIX
Excluded from the computation of the family, which is a Generic model
FIX
Added option when specifying a base plate to support the floor choose
FIX
Fixed error filling in the maximum step of the vertical rebars
FIX
Fixed a bug which releases the vertical rebars were created in the openings
FIX
Fixed some bugs
FIX
Fixed a build error blank panels on the ribbon
FIX
Added links to help for Personal account and Settings
FIX
Added a button to launch a Personal account from "Functions" palette
FIX
Fixed help link for the button "Personal account" on the ribbon
FIX
Fixed some bugs when working with adaptation menu
FIX
Fixed a bug that occurs when trying to work the function in Assembly views
FIX
Added the ability to change the localization language of the application
FIX
Added a new mini-function "Set Nested Objects layer"
FIX
Added the ability to change the localization language of the application
FIX
Added setting of layer “0” for all entities inside the block of intellectual entity
FIX
Fixed the error of saving selected properties (drop-down list) when creating custom styles
FIX
Added processing of text rotated 90 degrees (only Revit 2019 and higher)
FIX
Added sorting of the sheets in the list in alphabetical order
FIX
Replaced the method of elements selection on non-schedule views - selection picking elements instead of the select by frame
FIX
Some changes have been made to the processing parameters of elements located in groups
FIX
Fixed error "The given element id set is empty"
FIX
Small changes in the design
FIX
Fixed a display problem in the drop-down list of parameters whose names contain underscores
FIX
Added saving of the selected parameter in the schedule
FIX
Added the ability to number elements in groups
FIX
Added a warning about the offset of the dimension text when editing
FIX
Added the ability to perform text offset to selected dimensions
FIX
Added the ability to restore the position of the dimension text for the selected dimensions
FIX
Excluded Spot Dimensions and the dimensions with the property "Equality Display" equal "Equality Formula»
FIX
Fixed problem adding not valid (empty name) text style to the list of text styles
FIX
Fixed problem adding not valid (empty name) text style to the list of text styles
FIX
Fixed problem adding not valid (empty name) text style to the list of text styles
FIX
Fixed problem adding not valid (empty name) text style to the list of text styles
FIX
Fixed errors when sending and downloading files with notes
FIX
Fixed problem adding not valid (empty name) text style to the list of text styles
FIX
Fixed problem adding not valid (empty name) text style to the list of text styles
FIX
Fixed problem adding not valid (empty name) text style to the list of text styles
FIX
Fixed the cause of the error eNotImplementedYet in AutoCAD 2013-2017
FIX
Added title blocks according to ISO 7200:2004
FIX
Added a field to fill title blocks on ISO 7200:2004
FIX
Added the ability to order marking is schedules with unchecked "Itemize every instance"
FIX
Added the ability to duplicate text notes that appears on the sheets
FIX
Fixed the cause of a fatal error when you try to change the drawing order in the case that there are no entities on selected layers
FIX
Added the ability to save and load the adjusted position of the layers in the current drawing
FIX
Completely removed support for old data storage options of intelligent entities
FIX
Added accounting of the properties palette operation for entities located on the locked layer
FIX
Added the ability to create intelligent entities in the case that the current layer is locked
FIX
Added a popup message in case of missing updates when you manually check for updates
FIX
Fixed error when trying to create text cells that contain only whitespace
FIX
Removed registration key from the settings window
FIX
Added start Personal account
FIX
Added sync service personal data
FIX
Removed the Registration tab
FIX
Removed buttons to operate the activation keys
FIX
Added button to open a Personal account
FIX
Fixed problem creating only the joints from foundation plates
FIX
Fixed creation of joints from the foundation plates in the presence of the intersections of the walls
FIX
Reduced tolerance when checking the parallelism geometry
FIX
In the configuration window-added column "Note"
FIX
Added category "Structure Foundation"
FIX
Added category "Ceilings"
FIX
Optimization of some algorithms
FIX
Added the ability to create U-shaped rods at the upper end of the wall
FIX
Added the ability to create the indirect reinforcement rods in the framing of openings
FIX
Added the ability to configure the releases of the vertical rods of the main reinforcement
FIX
Made changes that should fix the cause of the error, where the support libraries are downloaded with zero size
FIX
Added advanced settings for the numbering of sheets with the ability to record part numbers in the parameter
FIX
Added versioning (not displayed) and update support libraries
FIX
Small changes in the design of popup window with notifications
FIX
Added absorption errors that may occur when updating tray icon
FIX
Removed support library ModPlusIconPacks.dll
FIX
Optimized method of saving the configuration file
FIX
Fixed some minor bugs
FIX
Fixed display name of the selected style in the properties palette
FIX
Added consideration styles that are not in current database of user styles
FIX
Upload and download files with user notes replaced with the FTP server on the web server
FIX
The changes are subject to the transfer of information on current versions of the components, functions, and news to web services
FIX
The changes are subject to the transfer of information on current versions of components and functions in web services
FIX
Added the ability to view multiple video features, if available
FIX
Fixed some minor bugs
FIX
Amended, taking into account the updating of the STB 1704-2012
FIX
In the document of STB 1704-2012 removed class S400 rebar
FIX
The transfer database directory to the folder to store user settings
FIX
Updating document STB 1704-2012
FIX
Added methods for working with a web server
FIX
Uploading and downloading of keys and configuration file are replaced with FTP servers to the web server
FIX
In all the Windows added the option to display progress during asynchronous operations
FIX
Download of the configuration file when you first start happening now until startup logo will appear
FIX
Changed status display of the document from icons to text
FIX
Added new theme – Dark AutoCAD 2020
FIX
Fixed background color for images in dark themes
FIX
Fixed a typo in the values of the positions of Ukraine
FIX
Added support for AutoCAD 2020
FIX
Added support for AutoCAD 2020
FIX
Added support for AutoCAD 2020
FIX
Added language translation depending on current language
FIX
Removed link to Google+
FIX
Fixed eNullObjectId exception, which could occur in earlier supported versions of AutoCAD
FIX
Added new command allowing to search the intellectual entities of the specified types
FIX
Added help when you press F1 for buttons on the ribbon
FIX
Added check time of the last edit of the file in case of updates of already existing files
FIX
Added the ability to export standards in a separate xml file and then import
FIX
Fixed saving of the set of layers
FIX
Fixed bug with reading Excel file with number of sheets is less than three in the limited version of the function
FIX
Changed the search priority: first, insert of import (ImportInstance), then the description of import (CADLinkType), if no inserts
FIX
Reduced minimum distance of crop box
FIX
Added support for Revit 2020
FIX
Binding to Google account is divided in two attempts. The first attempt does not require administrator rights
FIX
Added error report to error window
FIX
Added the ability to insert additional vertical rebars in the ends of the walls
FIX
Added the ability to handle not only the rebar in the selected elements, but selected rebar
FIX
Fixed saving of email address in the settings window
FIX
Fixed call of the contextual help for the split buttons on the ribbon
FIX
Added the ability to create reinforcement joints (6 types) from base plates located directly under the walls to be processed
FIX
The list of diameters of reinforcing bars is changed according to GOST 34028-2016
FIX
Fixed a bug due to which it was not possible to update the default reinforcement settings
FIX
Changed the way of specifying the binding of rods of vertical reinforcement of walls from the drop-down list to the input field of multiples of 1 mm
FIX
Added display of information about the cover of the main reinforcement of walls, taking into account the entered data
FIX
Added the ability to not close the function window after creating reinforcement
FIX
Fixed a bug due to which previously created stirrups were not removed when re-reinforcing
FIX
When creating stirrups, the intersections are not taken into account, unless the "Reinforcement of intersections" checkbox is not checked
FIX
Added the ability to reset the default reinforcement settings to the values included in the function
FIX
Added option for processing the additional step of vertical reinforcement of walls - to shift to both edges of the wall
FIX
Fixed bug of function hanging when modeling stirrups with a step of less than 400 mm
FIX
Fixed loading of reinforcement diameters from saved reinforcement settings files in case the reinforcement bar types are not yet created in the document
FIX
Fixed incorrect calculation of the length of the part in T-shaped intersections with right angles
FIX
Added context help call when pressing F1 on buttons in the ribbon
FIX
Added context help call when pressing F1 on buttons in the ribbon
FIX
Added context help call when pressing F1 on buttons in the ribbon
FIX
Added ability to specify what the visibility property set on
FIX
Fixed an error where the function ceased to work in the schedules
FIX
Added usage of user coordinate system when you search for formats with stamps in model space
FIX
Replaced the search algorithm of rebar out of the host from checking geometry of rebar to checking the centerlines of rebar, which increases the accuracy of the results
FIX
Optimization of module (less CPU consumption) when click button "Start update after close..."
FIX
Error correction compatibility of entities created in different versions of AutoCAD
FIX
Fixed bug when working with the schedluse that displays data by View Sheets
FIX
Fixed a localization error when deleting notes
FIX
Added digital signature
FIX
Added digital signature
FIX
Added digital signature
FIX
Added digital signature
FIX
Added display of status of the normative document
FIX
Added GOST 34028-2016
FIX
GOST 5781-82 and GOST 10884-94 marked as inactive
FIX
Added display of status of the selected normative document
FIX
Added ability to process multiple elements or all elements on the view
FIX
Added the ability to disable the visible properties for the rebars
FIX
Added settings window options of select elements for functions
FIX
Fixed bug of functions in schedules, in which there is a hidden field "Comment" used by function
FIX
Added a window displaying the license agreement when you first start in case of manual installation
FIX
Fixed a problem changing the colors of the buttons if you frequently move the mouse
FIX
Added methods that will be required for new functions
FIX
In the library design fixed bug not allowing to access some of the functions
FIX
Fixed a bug in the library window design, leading to fatal errors when called the Windows operating in parallel flow (for example, the Function "Import from Excel")
FIX
In the plugin settings window added the elements to work with LAN license Server: set the address to ping, to stop/resume a connection, disable the connection at next run
FIX
In the plugin settings window added the elements to work with LAN license Server: set the address to ping, to stop/resume a connection, disable the connection at next run
FIX
Fixed a fatal error in some drawings, when select a layout in the Manager
FIX
Added new command "Rebars outside host"
FIX
Added handling pre-selection
FIX
Fixed some bugs in the library for plugin design
FIX
Fixed some bugs that can occur when updating localization files
FIX
Pan the preview images is changed with the mouse wheel to left mouse button
FIX
When the table is selected in the list the scale of the preview image is reset
FIX
Changed the display of preview images
FIX
Added a new tables (form 1 – form 10) according to GOST 21.613-2014
FIX
Optimization of verification of changes and news at the time
FIX
Fixed re-rebuild of menu of adaptation after installing the new functions
FIX
Added display of change history in a separate window instead of go to the site
FIX
Changes in the design of the buttons in the module windows
FIX
Fixed freezing of context menu while checking the updates, called through the context menu
FIX
More compact display information about installed or updated functions under different versions of the same supported product
FIX
Reduced time between loading module and the first check for updates to 1 minute
FIX
Added message about the end of the subscription period if less than 7 days. Check subscription period is done once after 2 minutes after the start of the module
FIX
Added the ability to sort formats by the coordinates obtained from model space
FIX
Added methods for working with LAN license server
FIX
Added methods for working with LAN license server
FIX
Added methods for working with LAN license server
FIX
Added settings for LAN license server
FIX
Small changes in design
FIX
Changes in method of data storage in intellectual entities to improve the stability
FIX
Increased the time to check the news
FIX
Improved service of collecting and sending error – added more error information
FIX
Fixed some ways to access the website modplus.org that was handled incorrectly on some computers
FIX
Replaced icons and color in context menu
FIX
Added check for view template when working the command "Hide/Show"
FIX
Added ability to specify initial value
FIX
Added the ability to specify the parameter to be written to a numbered mark
FIX
Added the possibility to specify the numbering order
FIX
Added a restriction - function does not work in the specifications, in the properties of the sort which removed the tick "Itemized every instance"
FIX
Minor changes in the methods of constructing menus that are required for new functions
FIX
The transition to product support Renga version 13 and above
FIX
Added processing MEP objects, plates and signs (axes, levels, sections) for the function "Filter"
FIX
Disabling automatic dimensions offset when synchronizing with the Central model
FIX
Corrected work show "Select all/deselect" given search filter
FIX
Added displaying the number of selected sheets
FIX
Small changes in the design window
FIX
Documents: СТО АСЧМ 20-93, ГОСТ 8239-89, ГОСТ 26020-83 marked as "Inactive"
FIX
Added a new document ГОСТ Р 57837-2017 "Двутавры стальные горячекатаные с параллельными гранями полок. Технические условия"
FIX
Changed the linetype scale of the default entity "Straight axis" from 1 to 10
FIX
Changed the method of storing data in the entities, preventing damage of entities after run the command AUDIT (only for newly created entities or before the first editing entities)
FIX
Improved stability and fault tolerance when creating styles
FIX
Fixed minor bugs in window and code
FIX
The window of the plugin added a link to video instructions for working with the plugin
FIX
In the table properties of the block (drawing) added tooltips displaying the properties for comfortable reading long descriptions
FIX
Added field to specify feedback options when sending files to the server
FIX
Removed test run the application with administrator rights
FIX
Removed the edit acad.exe.config and revit.exe.config when connecting ModPlus for AutoCAD and Revit
FIX
Removal of no longer used libraries ControlzEx.dll and MahApps.Metro.dll
FIX
ModPlusStyle styling
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
The restriction on the version of the stored blocks, and drawings changed from 2010 to 2013
FIX
ModPlusStyle styling
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
ModPlusStyle styling
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Fixed error when closing AutoCAD with multiple drawings open
FIX
ModPlusStyle styling
FIX
Added the unavailability of the item "Attributes for the specification" shortcut menu for the blocks, created by the function "Product insert"
FIX
Fixed bug with conversion of length and height of the item when the edit item specifications loaded from an xml file (Requires Database upgrade). Only for specifications that was saved after updates
FIX
Fixed bug when convert the length and height of the product stored in the xml file using the function "Specifications"
FIX
Added checking the current running commands in AutoCAD before inserting a new multiline text or adding notes to an existing multiline text
FIX
Added method to test the availability of the AutoCAD editor for later use in functions with non-modal Windows
FIX
Fixed bug in setting the current annotative scale for the created entity when disabled property "Set the scale from style"
FIX
Added handling properties "Layer" in "Create analog" command (configurable in the Editor styles in the settings tab)
FIX
Section: fixed offset of text when scaling Section by the standard command "Scale"
FIX
Section: Added the possibility of mutual offset of the text (can be enabled in settings window)
FIX
Section: Added a new property "Sheet number position"
FIX
Completely rewritten the function for later more quickly and efficiently adding intelligent primitives
FIX
Added helper team "to Create analog"
FIX
Added a new intelligent entity "Section"
FIX
ModPlusStyle styling
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Changes in the contextual menu
FIX
Changes in the contextual menu
FIX
ModPlusStyle styling
FIX
Changes in the contextual menu
FIX
Fixed display of buttons in the window title when a dark theme
FIX
Added the ability to collect data from open drawings
FIX
ModPlusStyle style
FIX
Changes in the contextual menu for a mini function "Wipeout vertex"
FIX
Fixed a fatal error when reading data from a drafting view on computers with the optional designation of the time before noon and afternoon (AM/PM)
FIX
Added update view name when re-open function after rename a view in the project manager
FIX
Fixed error when deleting a table if open only one drafting view
FIX
Fixed a fatal error when selecting the binding in AutoCAD 2013-2015
FIX
Fixed a bug with setting the height of rows and the height of text when scale is not 1:1
FIX
ModPlusStyle style
FIX
Removed window transparency
FIX
Added a new object - Ground line
FIX
Fixed some bugs
FIX
ModPlusStyle styling
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
ModPlusStyle styling
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
ModPlusStyle styling
FIX
Fixed a fatal error while loading AutoCAD 2013-2015 when you add a panel to the ribbon
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
ModPlusStyle styling
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Changes in the design of the element "GroupBox" (in whole plugin)
FIX
Changes in the display of Change story
FIX
ModPlusStyle styling
FIX
ModPlusStyle styling
FIX
Removed window transparency
FIX
Fixed an error when searching for a suitable type of the TextNote
FIX
In the application for the removal of debris (mpCleaner) added remove no longer used helper libraries
FIX
Fixed a small error in the design of certain elements of Windows
FIX
Added new themes: Black Blue, Black Green, Cornflower Blue, Gray AutoCAD Inverse, Powder Amaranth, White DeepOrange, White Lime
FIX
Removed the use of some support libraries
FIX
Improved change history
FIX
ModPlusStyle styling
FIX
Changes to the window layout
FIX
Sorting has been added for some table columns
FIX
Background wall reinforcement is removed only when creating the same new reinforcement (vertical, horizontal, U-shaped, stirrups)
FIX
Improved search for walls involved in the intersection, but not selected by the user
FIX
Added the ability to not create background vertical or horizontal reinforcement
FIX
Fixed the creation of reinforcement in intersections whose reinforcement is disabled in the group reinforcement settings
FIX
Improved horizontal reinforcement trimming algorithm
FIX
Removed the ability to make the window translucent
FIX
Fixed bug when selecting U-shaped rods horizontally
FIX
Fixed the creation of U-shaped rods in the ends of walls with a gap in height
FIX
Improved merged cell handling
FIX
Functions rebuilt to work with the format of Open Office Xml (xlsx)
FIX
Removed the settings window. Settings moved to main function window
FIX
Added error handling when converting/building an excel sheet without interrupting the process of the function
FIX
Small bugs fixed
FIX
ModPlusStyle styling
FIX
Removed auto offset before first power up
FIX
ModPlusStyle styling
FIX
Fixed a critical error occurring during the upgrade without the subsequent launch of the Configurator
FIX
Added several new themes
FIX
The list of themes is ordered from light to dark
FIX
Some bugs fixed
FIX
ModPlusStyle styling
FIX
Changing the location of function files
FIX
Fixed the problem of dynamic preview when the function is working
FIX
Parallel dimensions processing added to the option "Align dimension lines"
FIX
Replacing basic function icons with adding icons for a dark AutoCAD ribbon theme
FIX
ModPlusStyle styling
FIX
Changing the location of function files
FIX
ModPlusStyle styling
FIX
Added support for new ModPlusStyle design library
FIX
Added support for new ModPlusStyle design library
FIX
Added check of adaptation menu with standard download in case of absence (internet connection is required)
FIX
Added new design library ModPlusStyle
FIX
Fixed installation of all functions for Revit
FIX
The "Settings" tab is divided into two tabs - "Settings" and "Registration"
FIX
Added timeout when working with FTP to prevent the Configurator from hanging in case there is no access to FTP
FIX
Added two wall selection filters (one for choice) - "Crossed by a cut plane" and "Belonging to the current level"
FIX
Added support for Renga MEP
FIX
Improved error collection when loading functions
FIX
Added error handling when linking to Google
FIX
Added support for Renga MEP
FIX
Added a collection of errors when loading functions and then displaying them in a text document
FIX
Fixed a bug of reinforcement of walls connected with arc walls
FIX
Fixed error checking the full versions of the function for AutoCAD when using a subscription
FIX
Checking write access in the location directory of the plug-in with the prohibition of launching the application
FIX
Checking write access in the location directory of the plug-in with the prohibition of launching the application
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
The blurring of the function icons in the function list and in the adaptation menu has been removed
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Fixed a bug "curve length is too small for Revit's tolerance", which occurs when working with elements of certain categories
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Minor fixes in the mechanism for updating functions, taking into account the transfer to a new directory of functions for AutoCAD
FIX
Fixed bug when installing the function for AutoCAD version 2013
FIX
Added function work on levels
FIX
Changes to the mechanism for loading functions
FIX
Added support for Renga products
FIX
Added the ability to disable all features for the specified product
FIX
Fixed some minor bugs
FIX
Added support for Renga products
FIX
Corrected column heading in the table according to form 1 GOST 21.508-93
FIX
Fixed bug when inserting the table in form 13 GOST 21.1101-2013
FIX
Fixed a fatal error when building a Ribbon in AutoCAD 2013, 2014
FIX
Fixed a fatal error when building a Ribbon in AutoCAD 2013, 2014
FIX
Added work with Parts
FIX
Added work with linked Revit projects (only on the view plan)
FIX
Changes have been made to the search algorithm for the location directory of Revit's addin files
FIX
Some bugs fixed
FIX
Changes have been made to the search algorithm for the location directory of Revit's addin files
FIX
Fixed bug with saving the adaptation menu when changing the size of the icons
FIX
Some bugs fixed
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Improved quick search by sheet list
FIX
Fixed error copying values of only non-empty sheet parameters
FIX
Added the ability to create copies of schedules instead of re-inserting them
FIX
Changes have been made to the location of the settings in the function window
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Fixed steel record when filling out the specification in the AutoCAD table
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Added the ability to copy the values of duplicated sheet parameters
FIX
Replacement of GOST 23279-85 at GOST 23279-2012
FIX
Added saving of the entered values
FIX
Replacement of main function icons adding icons for dark themes the AutoCAD ribbon
FIX
Fixed a problem that caused a fatal AutoCAD error when working with some dynamic blocks
FIX
Fixed some bugs when loading functions
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Fixed error of minimizing the function window when starting it from the floating menu
FIX
Fixed the cause of fatal completion of the work of Revit in case of error reading excel file
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Fixed bug of saving sets of layers
FIX
Changes are made in view of transfer of a folder of storage of the user settings
FIX
Changes are made in view of transfer of a folder of storage of the user settings
FIX
Checking the name of the configuration when it was created
FIX
Fixed a bug duplicate tabs on the Ribbon
FIX
Changes are made in view of transfer of a folder of storage of the user settings
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Changes are made in view of transfer of a folder of storage of the user settings
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Changes are made in view of transfer of a folder of storage of the user settings
FIX
Fixed bug with adding multileader styles without arrows
FIX
Changes are made in view of transfer of a folder of storage of the user settings
FIX
Fixed a bug duplicate tabs on the Ribbon
FIX
Fixed bug with saving Functions settings
FIX
The transfer of the UserData folder storing the Function settings to the current program user settings storage directory (C:/Users/{user name}/AppData/Roaming/ModPlus/UserData)
FIX
Fixed bug with saving Functions settings
FIX
The transfer of the UserData folder storing the Function settings to the current program user settings storage directory (C:/Users/{user name}/AppData/Roaming/ModPlus/UserData)
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Replacement of the main icons of the function with the addition of icons for the dark AutoCAD ribbon design theme
FIX
Replace some icons in the function window
FIX
Added the ability to change the icons of functions in the ribbon when switching the color theme in AutoCAD. Only if there are icons in the function itself
FIX
Replaced icons, included in the working libraries, on the icon in the style of flat design
FIX
Fixed bug when adding dimension style
FIX
Replaced icon
FIX
Added an additional method for finding the plugin registration folder for Revit
FIX
Fixed some bugs when running the auxiliary library with the configuration file
FIX
Added a new theme - AlabasterLight. Added new accent colors - Azure, SlateGray
FIX
In the configuration settings window added the ability to check/uncheck the entire column
FIX
Added work with categories: Air terminals, Windows, Doors
FIX
New algorithms have been added, allowing for some categories (columns, air terminals, windows, doors) to put the size on the auxiliary working plane
FIX
For the category "Equipment (Mechanisms)" added processing of extreme edges
FIX
Fixed a bug that caused skipping of some faces of elements
FIX
Minor corrections in design
FIX
Fixed error loading the list of standards in the "Settings" tab
FIX
For linear products (which require specification of length), insertion options "By two point" (side view and top view) and "In form of polyline" (cross-section) are added
FIX
Added immediate start of the second check of updates in case of reboot of the module after the update
FIX
Added unblocking from plug-in files (they can be marked as blocked when downloading from the internet)
FIX
Changes are made taking into account the storage of settings in the registry
FIX
The storage of the main plugin settings, information about the installed functions and menu settings has been transferred from the configuration file to the registry
FIX
The storage of the main plugin settings, information about the installed functions and menu settings has been transferred from the configuration file to the registry
FIX
Modified the methods of searching for Autodesk products on the user's computer, which will allow to connect the ModPlus plug-in to Advanced Steel
FIX
Modified the methods of searching for Autodesk products on the user's computer, which will allow to connect the ModPlus plug-in to Advanced Steel
FIX
Fixed a bug leading to a broken Function on some plans
FIX
Fixed bug when reading the history of changes from the site with English enabled
FIX
Added saving of the entered steel values
FIX
The problem of updating and downloading the 2013 version has been fixed
FIX
Added the ability to manually configure the proxy
FIX
Fixed bugs when updating plug-in components
FIX
Fixed minor bugs
FIX
Added the ability to manually configure the proxy
FIX
Fixed bugs when updating plug-in components
FIX
Fixed minor bugs
FIX
Added processing of equipment (mechanics) by the extreme edges
FIX
The problem of displaying icons in the 2013 version has been fixed
FIX
The error of incorrect setting of the first value of the axis at different angles was fixed
FIX
The window for editing axis values has been added to change the position of the markers
FIX
Fixed bug when rounding the mass in the function window and filling in the tables
FIX
Fixed bug when trying to update the configuration file during the installation of new functions
FIX
Added work with three types of subscription: for all functions, for functions under AutoCAD, for functions under Revit
FIX
Fixed some bugs when displaying subscription information
FIX
Subscription added
FIX
Binding to Google Account is now done in the application window, not in the browser
FIX
Some bugs fixed
FIX
Fixed error loading the function in AutoCAD 2013 on a 32-bit operating system
FIX
Fixed error of module self-updating
FIX
Added support for Revit 2019
FIX
Added support for Revit 2019
FIX
Added new mini-functions that allow you to add or remove vertices of wipeout
FIX
Removed support for AutoCAD 2010-2012
FIX
Terminated use of the third-party library Ionic.zip.dll
FIX
Improved stability when initializing localization languages
FIX
Removed support for AutoCAD 2010-2012
FIX
Terminated use of the third-party library Ionic.zip.dll
FIX
Improved stability when initializing localization languages
FIX
Terminated use of the third-party library Ionic.zip.dll
FIX
Fixed the problem of encoding some characters when filling out the registration key on the function page by clicking the "buy" button in the list of functions
FIX
Improved algorithms for determining the new position for offset dimension values
FIX
Added import processing for CADLinkType type
FIX
Fixed bug when loading palette
FIX
Added support for AutoCAD 2019
FIX
Added support for AutoCAD 2019
FIX
Added support for AutoCAD 2019
FIX
Auto-update module added downloading files with the system proxy server if available
FIX
Auto-update module added downloading files with the system proxy server if available
FIX
Fixed the problem of getting data from tables in the case when the user coordinate system is installed in the drawing
FIX
Fixed the problem of the fatal error of the Configurator in the event that it was not possible to get a list of hard disks
FIX
Small changes in design
FIX
Fixed the problem of displaying items in the context menu
FIX
Fixed error when trying to move a dimension value for a dimension whose value offset is not possible
FIX
Completely rewritten function code. Now the function works not only on plans, but also on sections and facades
FIX
Added the ability to duplicate legends and schedules without copying views
FIX
Added alignment of the title block if it was inserted in the source sheet not at the origin
FIX
Fixed some bugs when copying viewports
FIX
Added a new intelligent primitive - a straight axis
FIX
The style editor is also added and the settings of the plugin
FIX
Many minor bug fixes
FIX
Tools for working with the user database added the ability to rename the source file
FIX
Fixed a bug with filling in the tables if there are subsections in the specification
FIX
Fixed the problem of enabling / disabling context menus - now you do not need to restart AutoCAD
FIX
Removed buttons "up" and "down", which are unnecessary due to the use of Drag-and-drop
FIX
Fixed the problem of displaying layers that have a lower underscore in the name
FIX
Added journal of operations
FIX
Added EATTEDIT and BEDIT commands to the exclusion list
FIX
Configurator completely rewritten. Some bugs fixed
FIX
Simplified display of the history of changes
FIX
Completely changed the work with the adaptation menu. Added the ability to work with Drag-and-drop
FIX
Added the ability to add small buttons to the menu for Revit (groups of 2 or 3 functions)
FIX
When you click the "Buy" button in the list of functions, the page of this function opens on the site with the completed versions of the product and registration key
FIX
Checking the availability of new versions for functions is now performed only for those products to which the Mod Plus Plus plug-in is connected
FIX
Added automatic registration feature for Revit "Application" type
FIX
Some bugs fixed
FIX
Removed additional verification of text position added in version 1.1.3.0, because the solution was wrong
FIX
Side menu for selecting the operating mode is removed under the button (drop-down)
FIX
Added option "Insert result into existing single-line text with replacement"
FIX
Added window transparency (included in the side menu) when the window loses focus
FIX
Added ability to round values ​​from drawing
FIX
Changes in window design
FIX
When processing selected or selected items, the processing of 3D view borders is excluded
FIX
Added additional verification of the position of the text, allowing more flexibility to work with the existing size with the enabled tracking mode for existing sizes
FIX
Fixed bug when creating dimensions like "Diameter" and "Radius"
FIX
Added an offset of the dimensional value to the side, not down, if there is enough space on the adjacent size in the chain
FIX
Added the ability (enabled/disabled in the settings window) to shift the dimensional value when editing an existing size
FIX
Amendments were made according to the Resolution of the Government of the Russian Federation of September 8, 2017 N 1081
FIX
Fixed a bug that caused a fatal shutdown when applying changes to the drawing order
FIX
Added closed windows Options by pressing Esc
FIX
The Functions window is made non-modal (does not block Auto CAD)
FIX
Added the ability to stretch the window
FIX
Added ability to change the order of layers in the list by dragging with the left mouse button
FIX
Changed the work of the auxiliary program "ModPlus Cleaner"
FIX
Removed "Enable All" button with replacing "Install All" button with "Install and Enable All"
FIX
The work of the button “Install and enable all” is changed - no indication of the product version is required (it can be installed for all versions of the product at once)
FIX
Fixed the problem of enabling the "Dim offset" function for some users
FIX
Added methods required for registering certain Functions for Revit
FIX
Added a ban on navigation in the change history
FIX
Fixed video display issue on some computers
FIX
Changed the source of the change history to the change history from the site
FIX
A typo in the table according to form 3 of GOST 21.508-93 has been fixed
FIX
Amendments have been made in connection with the updating of side markings in accordance with GOST 21.1101-2013 Appendix Zh
FIX
Corrected lateral inscriptions according to GOST 21.1101-2013 Appendix F (in relation to GOST 21.1101-2009)
FIX
Fixed small errors in the design of the window
FIX
Added the ability to specify the number of copies when copying sheet(s)
FIX
Added memorization function of the last mode of operation - the creation of new text or move an existing
FIX
In the mode of moving existing text, the function is obscured until the user cancels it
FIX
In the mode of moving existing text, pre-selection processing is added - first select single-line text, then start the function
FIX
Fixed the contents of the KR template of documentation for capital construction objects
FIX
Fixed an issue that caused Auto CAD to freeze when working with a drawing with external references inserted when object snapping is enabled
FIX
Fixed a fatal error when searching for products from a drawing
FIX
Fixed a fatal error when trying to open an advertising window in paid features
FIX
Added the ability to specify the number of copies for each sheet
FIX
Added search and replace in sheet number
FIX
Fixed some errors in viewport duplication
FIX
Fixed a bug in the order of numbering from the specified cell down
FIX
Added progress window, displayed only when installing updates
FIX
Fixed error in building the adaptation menu when installing new functions when Auto CAD and Revit are available in the system
FIX
Completely removed the window with the display of progress
FIX
Removed the automatic minimization of the installation window
FIX
Removed the "Missed events" menu item, as well as creating and processing the file of the missed events
FIX
Added a notification window about the news on the site and in the community in the VK
FIX
Fixed a bug that leads to the disconnection of standard handles on AutoCAD tables
FIX
Fixed a bug that sometimes appears after creating a new layer when the "Auto" mode is on
FIX
Added updated data in the properties palette when changing the current selection of primitives
FIX
Added ability to save entered dimension values
FIX
Added rounding to integer numbers of measured sizes
FIX
Fixed the "eNotApplicable" error when editing tables
FIX
Исправлена фатальная ошибка при открытии окна Функции
FIX
Fixed a fatal error when opening the Function window
FIX
Fixed a fatal error when opening the Function window
FIX
Fixed a fatal error when opening the Function window
FIX
Added methods required for new Functions
FIX
Removed unused items on the Settings tab
FIX
Added check of start with administrator rights and a button for restarting the Configurator with administrator rights.
FIX
Fixed bug when unpacking autoupdate module from Configurator resources
FIX
Fixed the error "eNotOpenForWrite" when inserting a product into the table via the context menu
FIX
Fixed a bug that does not allow the use of mini-functions (command ... not found)
FIX
Eliminated the reasons leading to fatal errors with the included icon-identifier of products in some files
FIX
Made badges-product identifiers non-printable
FIX
Fixed a bug leading to overwriting settings when AutoCAD initialized
FIX
Fixed a cause leading to a fatal error when opening/editing a set of layers
FIX
Fixed bug when copying some viewports
FIX
Fixed bug when getting a number from a block with one attribute
FIX
Fixed unpacking autoupdate module
FIX
The error "Index was outside the bounds of the array"
FIX
Changes have been made to the interface of interaction between functions and the ModPlus plugin.
FIX
Changes have been made to the interface of interaction between functions and the ModPlus plugin.
FIX
Changes have been made to the interface of interaction between functions and the ModPlus plugin.
FIX
Minor changes to tape construction methods.
FIX
Some bugs fixed, arising from the construction of the ribbon, palette and / or floating menu
FIX
The item "Open Configurator" is added to the context menu of the module.
FIX
Added the ability to select the action by double-clicking on the tray icon in the settings: open the settings window or open the Configurator
FIX
Added ability to install dwg base pointer file
FIX
Added support for new interface for interacting with the ModPlus plugin.
FIX
Some minor changes have been made to the work of the "Adaptation" section in view of the new interaction interface.
FIX
Added support for new interface functions interaction with the plugin Mod Plus. Now more complete hints with pictures are available in the ribbon (provided they are added to the function)
FIX
Added the ability to create functions that have subfunctions. Those. in one function there can be several commands
FIX
Changed methods when building a tape
FIX
Added support for new interface functions interaction with the plugin Mod Plus. Now in the ribbon and the menu are available more complete tips with pictures (provided they are added to the function)
FIX
Added the ability to create functions that have subfunctions. Those. in one function there can be several commands
FIX
Changed methods when building a ribbon and menu
FIX
Added support for checking and updating the dwg database
FIX
Fixed error for square profile 100x100x3 according to GOST 30245-2003
FIX
Changes made to prevent e On Locked Layer error when making changes to tables
FIX
Fixed the error that occurred when invoking the context menu when the AutoCAD window was inactive
FIX
Added processing of stamps for Ukraine (DSTU B A.2.4-4: 2009) and Belarus (STB 2255-2012)
FIX
Amendments to store base stamps in one file
FIX
Changes are made to keep the base tables in one file.
FIX
Changes are made to keep the base tables in one file.
FIX
Storage of base stamps transferred to one file.
FIX
Small changes in the design of the window function
FIX
Storage of base tables moved to one file.
FIX
Added table according to GOST 21.111-84 Form 1 "Statement of the volume of construction and installation works"
FIX
Updated current versions of regulatory documents clarified.
FIX
Added "side stamps" in accordance with GOST 21.608-2014 Forms 4 and 5
FIX
Small changes in the design of the window function
FIX
Fixed error when copying sheets that do not have a title block.
FIX
Added support for additional themes
FIX
Added support for additional themes
FIX
Added support for additional themes
FIX
Added new design theme - DarkBlue
FIX
Update due to the replacement of the third-party library responsible for window decoration
FIX
Update due to the replacement of the third-party library responsible for window decoration
FIX
Added support for Revit 2018
FIX
Replacing the third-party library responsible for window decoration
FIX
Added support for Revit 2018
FIX
Added clearing of the plug-in folder from unused libraries and unsuccessful update files.
FIX
Removed logging
FIX
Added processing of primitives with extended data and blocks with attributes for specifications
FIX
Some bugs fixed
FIX
Added the ability to stretch the window
FIX
Added the ability to specify the country according to the norms of which the specification table will be inserted
FIX
Added context menu for the "Attributes for specification" blocks, which allows adding attributes for the specification to arbitrary blocks
FIX
When specifying objects in the drawing, product blocks, extended data primitives and specification blocks are added to the specification.
FIX
Some bugs fixed
FIX
Added processing by function (add / delete positions and mark mark) primitives with extended product/material data
FIX
Some bugs fixed
FIX
Added the ability to stretch the window
FIX
Added filter by main groups of items in the database.
FIX
Added loading of all documents from the database, except for those disabled by the user.
FIX
Added sorting by database sections in the disable / enable documents window
FIX
Added display of the status of the regulatory document
FIX
To indicate the dimensions of the product (length, width, height, diameter) added the ability to measure the distance between two points in the drawing
FIX
Added option "Replace block"
FIX
Added option "Add to entities", which allows to write data of a product/material to the extended data of any primitive
FIX
In the context menu for primitives with extended data, the MR item has been added: Product data allowing viewing information of the selected product/material
FIX
Added notes for additional product/material properties in some documents.
FIX
Some bugs fixed
FIX
Updated steel grades for documents: GOST 27772-2015 (to replace GOST 27772-88), GOST 380-2005 (instead of GOST 380-94), GOST 1050-2013 (instead of GOST 1050-88), GOST 19281-2014 (instead of GOST 19281-89)
FIX
Added new normative documents: GOST 8736-2014, GOST 31938-2012, GOST 8267-93, GOST 5742, GOST 31360-2007, GOST 379-95, GOST 530-2012, GOST 28013-98
FIX
In all documents of the database added the value "Status"
FIX
Added and changed some methods required for the section "Products"
FIX
Added option for single line of text analogues on the length of the string
FIX
Fixed bug removing the backlight when the cancellation of the team's work
FIX
Added option (in settings) "to Add the samples in the resulting set (the choice on the model selected)"
FIX
Added some helper methods that are required for functions to work
FIX
Removed floating menu
FIX
Changed build method tab on the ribbon, given the Revit UI Api
FIX
From a customization settings for Revit removed the options to enable/disable tape and floating menu. The default will always be under construction tab on the ribbon, and the floating menu excluded
FIX
Added handling of stamps and tables of specifications for standards of Ukraine (DSTU B A. 2.4-4:2009) and Belarus (STB 2255-2012)
FIX
Added handling of the dies according to the standards of Ukraine (DSTU B A. 2.4-4:2009) and Belarus (STB 2255-2012)
FIX
Changes with changes of stamps in form F5, F9, Ф9а according to GOST R 21.1101-2013
FIX
Fixed errors when processing some stamps
FIX
Amended in accordance with GOST R 21.1101-2013 to replace GOST R 21.1101-2009 – changed the stamps on the form F5, F9, Ф9а
FIX
Corrected the installation of a large font and no indentation in some stamps
FIX
Added stamps on the documents: DSTU B A. 2.4-4:2009 for Ukraine and STB 2255-2012 for Belarus
FIX
Multiple small changes in the design of the Windows functions
FIX
Fixed some bugs in the library for AutoCAD 2018
FIX
Added support for AutoCAD 2018
FIX
Added support for AutoCAD 2018
FIX
To developers: fixed error displaying functions developed for AutoCAD in the absence of Revit
FIX
Fixed a bug causing the lack of a button to start function "Fields" in the ribbon
FIX
Added a button to run the function Fields in the palette flyout menu (must be installed feature "Stamps")
FIX
Changes in the collection of statistics, taking into account changes of data acquisition on AutoDesk products
FIX
Added support for Revit 2017
FIX
Fixed bug with setting/removing the checkmark from the "Send statistics" and "Send errors"
FIX
Various small fixes and additions
FIX
Added support for Revit 2017
FIX
Changed the search engine AutoDesk products
FIX
The splash screen is replaced by a dynamic display of the loading stages of Configurator
FIX
Various small fixes and additions
FIX
For developers: fixed a fatal error that occurs in the absence of a developed library icons
FIX
Fixed error when creating a floating menu after upgrade to 1.7.3.0
FIX
Some bugs fixed that could occur when building a menu of adaptation
FIX
The changes required for future expansion of the functionality of the plugin
FIX
On the settings tab added methods for working with server – upload and download user files of notes. Only available in the full version of the function
FIX
In the settings window added the ability to specify the mail to the server
FIX
Fixed the size of floating Windows when folding and unfolding
FIX
Fixed links when you go to the website to buy functions
FIX
Some bugs fixed
FIX
Removed the focus on the information window of the module
FIX
Added check for names of statistics files when sending to the server in case of coincidence of user logins
FIX
Added a repetition of the angle of rotation model formats the replacement of mats
FIX
Fixed eNullObjectId ("object Reference not set to an instance of an object"), appearing for some users when adding standards
FIX
Fixed a bug resulting in sending the log file and statistics every time you check for updates (sending only happens once a day)
FIX
Added logging module and sending the log files to the server
FIX
In the module settings dialog added option to enable/disable the sending of errors and statistics
FIX
Small changes in the code
FIX
Module auto-update added the ability to update the module without running Configurator
FIX
In the module auto-update fixed bug where didn't display the message box
FIX
Removed from the statistics IP information and left only the data about the location (country, city) defined by IP
FIX
The module auto-update set to run as administrator
FIX
Some bugs fixed
FIX
In the collection of statistics added location detection by ip
FIX
Changed graphic design the context menu of the module auto-update
FIX
Fixed error when manually installing/updating via the auto-update module
FIX
Various minor fixes
FIX
Fixed bug in auto-update module that occur when sending errors in case the folder /ModPlus/Errors
FIX
Fixed bug in Configurator, resulting in the removal of the login in "Login"field
FIX
Fixed an error creating the entry in the registry, after deleting the settings
FIX
Module auto-update added save errors to a file
FIX
Fixed error when deleting all settings
FIX
Added the option to remove the app (on the Settings tab)
FIX
Removed ability to switch to another settings file
FIX
Added the ability to save (and download) the configuration file on the server modplus.org
FIX
Added the ability to save (and download) the keys for paid functions on the server modplus.org
FIX
Added ability to send error files to the server modplus.org (to be included in Configurator on the Settings tab)
FIX
Window display errors that occurred during the ModPlus plugin, removed the button "Save to file". Errors will always persist (folder /ModPlus/Errors)
FIX
Added the ability to collect and send usage statistics of the plugin (should be included in Configurator on the Settings tab)
FIX
Small cosmetic changes
FIX
Added ability to select the source database tables depending on the country
FIX
Added tables to documents: DSTU B A. 2.4-4:2009 for Ukraine and STB 2255-2012 for Belarus
FIX
Reworked the internal working methods of the function with the database table
FIX
Dwg files of the tables, divided according to countries
FIX
Removed the button "minimize the window"
FIX
Fixed some bugs
FIX
Fixed error occurring when you first start the Configurator
FIX
Fixed bug fill the current styles when you go to the "Settings"tab
FIX
Fixed installation methods current layers after adding them
FIX
Added methods to add text styles, stored in dimension styles and multileaders styles, which eliminates error in the absence of the desired text style from the list
FIX
Amended by adding binding to your Google account
FIX
Added reference to a Google account
FIX
Added the ability to specify the worksheets which you want to make changes
FIX
Some bugs fixed
FIX
Added a new mini-feature of the Border of the viewport in model space
FIX
Fixed bug when working with AutoCAD version 2013
FIX
Added receive data sheets, including the processing of viewpoints on these pages
FIX
Upon receipt of the statement of added processing drawings stamps on forms 4, 5, 6, 9, 9a (GOST 21.1101-2013)
FIX
The window functions added to the status bar
FIX
Some bugs fixed in the code
FIX
Changes in the processing of data according to forms 4, 5 (GOST 21.1101-2013)
FIX
Added processing of forms 9, 9a (GOST 21.1101-2013)
FIX
Fixed bug when clicking "Apply" in the absence of data for the application
FIX
Corrections according to the changes of the stamp on the form 5 (GOST 21.1101-2013)
FIX
Fixed the cell to insert the sheet name in stamp form 4 (GOST 21.1101-2013)
FIX
Edited stamps on forms 5, 9, 9a according to GOST 21.1101-2013
FIX
Attribute, are added to the block mats of the specified text height 3
FIX
Changed progress bar color to the color of the current theme
FIX
Changed methods to insert text and callouts used function Calculator – added handling of custom coordinate systems
FIX
Some bugs fixed when switching between sheets
FIX
Added remembering of the position for the Windows
FIX
Added automatic translation into the text field Windows New sheet name and Rename a sheet when opening
FIX
For window Move/copy added the ability to resize the window
FIX
Added handling of Enter and Esc buttons in all the Windows functions
FIX
Fixed error when manually installing updates from the specified folders/files in the module auto-update
FIX
Added connection Manager sheets to palette, ModPlus
FIX
Added ability to set the palette on the tab "Adaptation"
FIX
Removed the test login when loading the key file
FIX
Added palette ModPlus with the ability to activate the tabs Function, Drawings
FIX
Some bugs fixed when working with the list of open drawings
FIX
Some bugs fixed the ribbon
FIX
Added check the running of auto-update module
FIX
Fixed a bug with copy empty tiles with the "move/copy"
FIX
Fixed display sheets when closing all documents
FIX
Multiple selection (hold down Ctrl key or Shift key)
FIX
Added ability to enable/disable the query name when you create the worksheet
FIX
Added button to create new sheet template
FIX
Added context menu: Move/copy, Select all sheets, settings Manager leaves, Print, Export sheet tab of the model
FIX
Changed the main mechanisms of function
FIX
Fixed problem with minimizing the window settings when you minimize the palette
FIX
Various bug fixes
FIX
Added the option of rounding the masses when you insert products into a table AutoCad
FIX
Added the ability to suppress the tailing zeros
FIX
Fixed price function
FIX
Changed the mechanism of the construction of the middle line
FIX
Added a new mini-feature is frequently used blocks. To configure and enable to use the Settings window (mpSettings)
FIX
Fixed small error in the code
FIX
Added a backup configuration file
FIX
Added the installation of databases
FIX
Improved blocks "shooter" for dimension styles and multileaders styles (only for new)
FIX
Added the ability to copy standards from the specified file (can be set automatic copying when you create a new file)
FIX
Fixed problem entering the distance from the second to the third point in the function the Rectangle by three points
FIX
Changes in connection with the updating of databases
FIX
Changes required for new features
FIX
Fixed a memory leak issue, causing a fatal error when the function blocks
FIX
Added possibility to add leading zeros (bringing the number to the category)
FIX
Set prefix, suffix and leading zeros are put into a separate settings window, which appears automatically
FIX
Added landing mats on layer "0" when insert or replace
FIX
Improved work with missing messages in the module auto-update
FIX
Fixed a bug that caused cleaning the cell text Height and the Height of the lines in the program window the first time you use the function
FIX
Added the ability to copy blocks with numbered attributes
FIX
Added new feature Build the middle line
FIX
Fixed offset of text when copying
FIX
Fixed bug when working with multileaders
FIX
Small changes in the code
FIX
Removed option "Dynamic rendering of a table when inserting"
FIX
Fixed problem with fatal error when inserting tables in some files (mostly AutoCad 2016)
FIX
Removed option "Dynamic rendering of a table when inserting"
FIX
Fixed problem with fatal error when inserting tables in some files (mostly AutoCad 2016)
FIX
Removed the "password" field and the "check" button in the "authorization"
FIX
Auto update module:
FIX
Fixed the bug of no menu when there is a message for the user of missed events
FIX
Removed the option to automatically install new features
FIX
Added selection dialog for new features to install
FIX
Some bugs fixed
FIX
Returned to the old module registration
FIX
Fixed a build error empty (no functions) in the floating menu and the ribbon
FIX
Attached communication module plug-in with AutoCad 2017
FIX
An updated version of the module design
FIX
Added support for AutoCad 2017
FIX
Changed the default storage folder for the configuration file in /ModPlus/UserData
FIX
Added removing of spaces while maintaining activation keys in the configuration file
FIX
Added update icon in the tray after restart, automatic update module
FIX
Removed the button "minimize the window"
FIX
Added remembering last feature of these data: the steel, the density, the additional properties item in the table
FIX
Added the ability to set the scale Formats (user request)
FIX
Fixed bug with scaling of text scaling of the stamp (box scale is not 1:1)
FIX
Fixed binding of stamp to the insertion point in the "drawing cursor"
FIX
Fixed binding the table to the insertion point in the "drawing cursor"
FIX
Added the ability to edit the list of documents used by the function
FIX
Fixed the error "Refresh not allowed..." when you change layer properties in the layer editor
FIX
Fixed saving and loading of line styles to layers
FIX
Fixed save and fill the set values for list "make current" in the settings
FIX
Added the ability to paste stamps without drawing the cursor in the process of specifying the insertion point
FIX
Added the ability to insert tables without drawing the cursor in the process of specifying the insertion point
FIX
Removed the message “no document”, added early to test
FIX
Fixed error reading list of commands to exception
FIX
If the number of copies exceeds 100 pieces, while specifying the second point of the dynamic objects are drawn off
FIX
Added remembering of the function selected values of the normative document, diameter and grade of rebar
FIX
Changed the mechanism to function in the best stability (experimental)
FIX
Added the ability to set layers for the selected objects from the window function
FIX
Added the ability to save/load settings layers
FIX
Some minor changes in the code
FIX
Added the same version 1.1.3.4 function Stamps
FIX
Added the ability to get a value for a field from the object in the current drawing (text, multileader, table)
FIX
Added the ability to load the field values from the specified dwg file
FIX
Improved display of tooltips for the fields in accordance with GOST R 21.1101-2013 (tooltip when you hover the cursor on the input field)
FIX
Added the ability to specify the height of text in cells of a stamp
FIX
Added the ability to specify additional text height for some cells of a stamp ("document Symbol", "stage", etc.)
FIX
The function changes the spacing horizontally and vertically in the cells of a stamp after it is inserted into 0.5. For cells "number.Uch." and "n-dock" the horizontal spacing is changed to 0.0
FIX
Added the ability to use the dwg file as a logo for the stamp
FIX
Some minor changes in code and design
FIX
Added the display window size of the selected format
FIX
Added saving the selected orientation of the side multiplicity
FIX
In the settings window added the section "Context menu"
FIX
Added a mini-feature "Set sub entities ByBlock"
FIX
Some bugs fixed in the update
FIX
From the Configurator removed old versions check for updates
FIX
Module auto-update added checking for latest updates 2 minutes after the start of the module
FIX
Small changes in the code
FIX
Of the modules of the plugin to work in AutoCad removed everything associated with checking for updates (methods, settings)
FIX
Added module of automatic update of plug-in components
FIX
Added the ability to repeat for the replacement of blocks on some properties of the model blocks (layer, scale, transformation)
FIX
Added settings window functions
FIX
To request the removal of units from the database-added options (to ask, to automatically delete, not remove)
FIX
When inserting tables sometimes there is a fatal error in AutoCad. In this regard, the code for inserting tables in the drawing has been redone
FIX
Added a new table (11 pieces) according to GOST 21.701-2013 "ASAP. Rules of execution of working documentation for roads"
FIX
Added the ability to zoom and pan the image preview of tables
FIX
Replaced all image preview tables
FIX
Added display of the document title in the window functions
FIX
Sorting layers in the layer editor in ascending order (by name)
FIX
Added button to refresh the list of layers
FIX
Added the section "Interpolation"
FIX
Added the section "Degree bias"
FIX
Various small changes
FIX
Fixed error when building the AR template
FIX
Of treatment while maintaining and creating the removed layers IsReconciled (agreed)
FIX
Changes in connection with the updating working files
FIX
In the settings window added button "Check for updates"
FIX
Added floating window "Drawings". Included in the preferences window
FIX
Added ability to minimize the floating Windows (can roll in the title or collapse icon)
FIX
Small changes in the file settings
FIX
Attached document: TU 14-3R-56-2001 "welded steel Pipes with diameter of 1420, 1620, 1720, 2020 and 2220 mm General purpose"
FIX
Fixed bug when you save sets of layers
FIX
The ability to add and store their own standards
FIX
Automatically adding these standards to create or open a drawing
FIX
Fixed links when you click "go to store"
FIX
From the list of blocks for the logo removed anonymous blocks
FIX
In the option "Fields" is added before viewing cells (GOST R 21.1101, Appendix W, form 3)
FIX
When you insert the stamp sometimes there is a fatal error in AutoCad. In this regard, the code for the insert stamp in the drawing has been redone
FIX
Various small changes
FIX
Added the ability to insert the sheet name and number in the stamp when creating a new sheet (if the stamp supports insertion)
FIX
Removed ability to resize the window
FIX
Fixed error when reading the settings when you first start
FIX
From the list of blocks for the logo removed anonymous blocks
FIX
Various small changes
FIX
Fixed template creation for AutoCAD versions 2011-2016
FIX
Made various changes to the templates
FIX
Added sequentially numbered pages
FIX
Fixed bug when retrieving data from a field drawing
FIX
Fixed a bug when installing the scale, not contained in the object
FIX
Removed annotation list newly created blocks formats
FIX
Added graphical representation of mats
FIX
Added the ability to add side labels
FIX
Added the ability to add stamp using fields (according to the principle of function Stamps)
FIX
Added the ability to specify the worksheet name when you create a new sheet with format key
FIX
Removed automatic creation of text style MpTxtStyle
FIX
Added ability to set text style (like the mats and stamps)
FIX
Various small changes
FIX
Added the ability to edit the list of commands to exclude from the processing function
FIX
Some important breaking changes in the code
FIX
From the sorting options removed "Connected" and "Not connected" (a Temporary solution to the development of more convenient options of sorting)
FIX
Button "Enable all" works now for all versions of AutoCAD
FIX
Fixed some bugs
FIX
Completely redesigned interface of the Windows functions
FIX
Simultaneous work with custom annotations and standard annotations ModPlus
FIX
Configure the action by double-clicking on the note
FIX
The ability to edit a custom note
FIX
Many small fixes and improvements
FIX
More quick start Configurator
FIX
Revised methods for the list building functions
FIX
Added welcome window
FIX
Added search function
FIX
Various small changes
FIX
Fixed parameter mass per meter for pipes according to GOST 8645-68. Attention! Pipes according to GOST 8645-68, inserted in the form of products ModPlus to the current updates will continue to be wrong a lot!
FIX
Update to the new principle of storing data in the database
FIX
Various bug fixes
FIX
A full update of the principles of database
FIX
Added new methods to the extended data (required for new features section of the Product)
FIX
Ignoring the error if it cannot delete the temporary files
FIX
Faster export to calculate the length of anchoring in Word
FIX
For primitives in the generated set unit properties "Block" that will allow you to change the block color, style and weight of lines
FIX
Added the ability to delete a file path to insert table from a file
FIX
Fixed bug when insert some tables
FIX
Various small changes
FIX
Changes required for new features
FIX
A window with the message about new features replaced by the more informative
FIX
Fixed small error in the code
FIX
Added ability to work with activation keys (export, import, check all, delete)
FIX
Added social links (youtube, google )
FIX
In the description of the functions added to video (as soon on the youtube channel)
FIX
Added the ability to create/delete the shortcut on the desktop
FIX
Added the ability to collapse the left panel on the Configuration tab
FIX
Minor fixes in the Updater
FIX
Various small changes
FIX
Copying text regardless of the text-the source is in single line or multiline
FIX
Changes in connection with the updating library window decoration
FIX
A slight change of style of Windows
FIX
Replaced library the window decoration
FIX
Setting window border plugin
FIX
A message to the user about the availability of new features
FIX
The list building functions are only available for versions of AutoCad
FIX
A slight change of style of Windows
FIX
Remembering window position Configurator
FIX
Changed the way of displaying the change history
FIX
Added options for connection
FIX
Added the ability to check the entered activation key
FIX
Various small changes
FIX
Minor fixes in the Updater functions
FIX
Fixed problem rewriting the text style MpTxtStyle when you insert a table
FIX
Removed regeneration after inserting the table
FIX
Improved application properties to the inserted table
FIX
Small changes in the design window
FIX
Fixed display Windows with a dark theme
FIX
Added a new version of the bind program to a physical disk
FIX
Improved test versions of plug-in components
FIX
Various small changes
FIX
Added a new version of the bind program to a physical disk
FIX
Improved test versions of plug-in components
FIX
Various small changes
FIX
Added decals (2pcs) for GOST 2.104-2006
FIX
Small changes in the code
FIX
Added methods for working with databases
FIX
Added new methods for future features
FIX
Improved handling of update check in the settings window
FIX
Verification of conformity of the AutoCad version of the plugin
FIX
A separate theme for the plugin and Configurator
FIX
The update features a separate module
FIX
Various small changes
FIX
Important critical fixes in the code
FIX
Various changes required for new features
FIX
Various minor changes
FIX
Fixed display of results when a dark design
FIX
Added the option of rounding the result
FIX
Added the ability to insert the result in the table cell
FIX
Added the ability to insert the result in the form of a single line of text
FIX
Important critical fixes in the code
FIX
Added option comparison a single-line text height
FIX
Corrected the function icon in the ribbon, and the Configurator is displayed normally
FIX
In the settings window added Adaptation
FIX
Exclusion from the list (while checking for New availability of new functions) functions with the parameter do Not recall
FIX
Added settings button in the ribbon
FIX
Added new options to sort list of functions
FIX
Added button to Set all
FIX
Added button to Enable all
FIX
Added SplashScreen
FIX
Added option to remind for unspecified functions
FIX
Various minor changes
FIX
Tab Adaptation added a button to Clear the menu
FIX
Fixed a bug with the build menu of adaptation at the touch of a button to Build a standard
FIX
Fixed display of icons in menu adaptation
FIX
Small changes in the code of the plugin ModPlus 2016
FIX
Added ModPlus plugin to work in AutoCad 2016
FIX
Added support for AutoCad 2016
FIX
The function remembers the last entered distance value and the step
FIX
Added the ability to enable the context menu to Add as a note for single-line and multiline text
FIX
Modified GOST R 21.1101-2009, GOST R 21.1101-2013
FIX
Added table according to GOST 21.602-2003 (Forms 1,2,3,4)
FIX
A variety of related fixes in the code
FIX
Remembering by Configurator the size of the window when closing
FIX
Tab on the Adaptation button is added to the standard Build - the build menu on the standard scheme
FIX
Added options to show the active functions (Adaptation): all not used
FIX
On the About tab-added history of changes
FIX
Various fixes in the code
FIX
Minor fixes in the code
FIX
Added tune function ModPlus. The function is included in the plugin itself
FIX
Tweaked to work with the ribbon and floating menu
FIX
Modified GOST R 21.1101-2009, GOST R 21.1101-2013
FIX
Positions in the stamp are saved in the configuration file
FIX
Added the ability to create custom posts and use them as fields
FIX
In the list of posts in the stamp are now being used for empty values, allowing you to add posts to the desired cell of a stamp
FIX
Added check for running copies of an application
FIX
Configurator set to run as administrator
FIX
Automatic closing of the Configurator when you start AutoCad
FIX
In the update function working libraries (mpUpdater.exe in the folder ModPlus) added ability to apply updates from the specified file
FIX
Improved work with list of functions with the availability of multiple versions of AutoCAD
FIX
Minor fixes in the code
FIX
Fixed bug not allowing to copy tables from resource programs to drive user
FIX
In the previous version doesn't work check the new features or feature upgrades. Fixed