Skip to main content

Slope Hatching

Slope Hatching
Attention! The plugin is purchased for the specified version of nanoCAD!
$7.20
Discount system: 0%
Discount system
Name Discount Total value of individual orders Total value of corporate orders
Regular user 0%
3% discount 3% $84 $180
5% discount 5% $120 $360
7% discount 7% $180 $600
10% discount 10% $300 $900
15% discount 15% $360 $1 200
Partners 30%
BIM Consulting 50%
Super VIP 100%
A subscription is your best choice. Find out why!
To use the purchased license, use the Personal Area of the ModPlus software installed on your computer
Create Slope Hatching

Launch options

  • ModPlus floating menu or palette
  • Menu, toolbar, or ribbon in nanoCAD
  • Command line: _mncSlope

Icon

mncSlope_32x32 mncSlope_16x16 mncSlope_32x32_dark mncSlope_16x16_dark

Using

The plugin is designed to create conventional slope symbols and allows you to configure the hatch type, its parameters, and appearance.

To start working with the plugin, create a configuration by clicking . Created configurations can be duplicated plus box multiple outline, renamed square edit outline, exported export, imported import, and deleted delete outline using the corresponding buttons.

Slope type

The upper part of the group displays a preview of the hatching according to the selected settings.

Slope Type – determines the slope hatching pattern. The following options are available:

  • Simple
  • Break
  • Excavation
  • Reinforced
  • Retaining wall

Merge Hatching – determines how the created hatching elements are combined:

  • No – hatching elements are created separately
  • Group – the created hatching elements are combined into a group

Long Dash Color – specifies the color of the main strokes

Short Dash Color – specifies the color of the short strokes

Move to Layer – allows you to place the created hatching on the specified layer. If the specified layer does not exist, it will be created

Mask Background – enables masking of objects located behind the created hatching

Slope parameters

Hatching Step – specifies the distance between strokes

Offset from Base – specifies the offset of the main strokes from the slope toe

Short Dash Length – specifies the length of the short strokes

For the Offset from Base and Short Dash Length parameters, the Absolute Value option can be enabled. When enabled, the value is specified in drawing units; when disabled, it is specified as a percentage of the length of the main strokes.

Additional settings

Separate Operations for Undo – separates the creation of hatching into individual operations that can be undone sequentially using the standard AutoCAD Undo command.

Creating hatching

After configuring the parameters, click Continue. Then specify the slope geometry in the drawing step by step.

Select slope crest [Entire/Settings]: – select a line, polyline, or part of it corresponding to the slope crest. The following options are available:

  • Entire – use the entire selected object
  • Part – use only part of the selected object
  • Settings – return to the plugin settings window

Select slope toe [Entire/Settings]: – select a line, polyline, or part of it corresponding to the slope toe. The Entire, Part, and Settings options are also available.

When the Part option is selected, you must additionally specify the boundaries of the section to be used:

Select first point: – specifies the start of the section.

Select second point: – specifies the end of the section.

After selecting the slope crest and toe, the plugin creates the slope hatching. If necessary, its position can be adjusted manually:

Select first line of editing range [Point]: – specifies the first boundary of the hatching section to be adjusted.

Select second line of editing range [Point]: – specifies the second boundary of the hatching section to be adjusted.

Select line for centering: – select the hatching line that needs to be manually moved to the required position.

Select new point: – specifies the new position of the selected stroke. The remaining strokes within the specified range will be redistributed according to the new position.

The adjustment step can be skipped by pressing Enter after selecting the slope toe.

Swap crest and toe? [No/Yes]: – allows you to swap the selected slope crest and toe.

After the hatching is created, the plugin continues to run cyclically and prompts you to select the geometry of the next slope. Press Esc to exit.